Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revision Both sides next revision | ||
|
techtalk:evo:elec03 [2020/02/26 21:15] ixl2relax [Turn Signal/Security Module - TSSM] |
techtalk:evo:elec03 [2020/02/26 21:27] ixl2relax [Turn Signal/Security Module - TSSM] |
||
|---|---|---|---|
| Line 669: | Line 669: | ||
| **( [[http://xlforum.net/forums/showpost.php?p=5466769&postcount=32|Reference for Turn Signal Switches - Part Numbers for all years]] )**\\ | **( [[http://xlforum.net/forums/showpost.php?p=5466769&postcount=32|Reference for Turn Signal Switches - Part Numbers for all years]] )**\\ | ||
| - | ===== Turn Signal/Security Module - TSSM ===== | + | ===== Turn Signal/Security Module (TSSM) and Siren ===== |
| Line 697: | Line 697: | ||
| When the TSSM has been armed and a security event occurs, the alarm cycle is activated, causing the siren to sound and the turn signal lamps to flash. | When the TSSM has been armed and a security event occurs, the alarm cycle is activated, causing the siren to sound and the turn signal lamps to flash. | ||
| - | In this > [[https://serviceinfo.harley-davidson.com/sip/service/document/118167?locale=en_US|Install Guide]], there are two different extension cables mentioned. These cables reach from the stock harness connector by the electrical panel and battery to below the bike where the siren will be mounted. | + | In this >[[https://serviceinfo.harley-davidson.com/sip/service/document/118167?locale=en_US|Siren Install Guide]], there are two different extension cables mentioned. These cables reach from the stock harness connector by the electrical panel and battery (the connector is located in the same place on all 2004-later models) to below the bike where the siren will be mounted. These cables are not represented on the electrical schematics. |
| - | For 2004-05 models, use extension cable 91702-04 which has a harness connector that is triangular to the oval siren connector.\\ | + | For 2004-05 models, use a conversion/extension cable, 91702-04. On these models, the stock electrical harness connector for the siren is a 3-pin Deutsch connector, triangular in shape. This extension cable has the 3-pin triangular harness connector on one end and connects to the siren which uses a 3-pin Delphi Packard connector. |
| - | For 2006-later models, use extension cable 91734-06 which has an oval harness connector then to the oval siren connector.\\ | + | |
| + | For 2006-later models, use the extension cable, 91734-06. On these models, the stock electrical harness connector for the siren is a 3-pin Delphi Packard connector that mates with the connector on the siren. So this is a simple, true extension cable, with mating siren connectors on the ends. | ||
