Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
techtalk:evo:engmech04b [2019/07/28 02:08]
hippysmack [Spring Clearance]
techtalk:evo:engmech04b [2020/06/05 20:54] (current)
hippysmack [Clearancing the Rocker Boxes]
Line 11: Line 11:
 If problems are found, below are some examples of how those have been addressed. \\ If problems are found, below are some examples of how those have been addressed. \\
 ====== Clearancing the Rocker Boxes ====== ====== Clearancing the Rocker Boxes ======
 +Rocker shaft to Rocker box clearance for all XL’s is 0.0007” to 0.0022”. ((2000 MMI Documents)) \\
 +
 High lift cams or changes in the valve springs can cause contact in the rocker box. ((Scuba10jdl of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​p=5601873&​highlight=rocker+wear#​post5601873)) \\ High lift cams or changes in the valve springs can cause contact in the rocker box. ((Scuba10jdl of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​p=5601873&​highlight=rocker+wear#​post5601873)) \\
 When you have high lift cams, as the rockers push your valves open they are also putting a sideways pressure on the valve stems. ((mikeLI_77 of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​p=5601873&​highlight=rocker+wear#​post5601873)) \\ When you have high lift cams, as the rockers push your valves open they are also putting a sideways pressure on the valve stems. ((mikeLI_77 of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​p=5601873&​highlight=rocker+wear#​post5601873)) \\