Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revision Both sides next revision | ||
|
techtalk:evo:engmech07 [2020/08/08 23:20] hippysmack [1991-2003 Engine Breathing] |
techtalk:evo:engmech07 [2020/08/08 23:21] hippysmack [2004-Present Engine Breathing] |
||
|---|---|---|---|
| Line 113: | Line 113: | ||
| ====== 2004-Present Engine Breathing ====== | ====== 2004-Present Engine Breathing ====== | ||
| + | **An important note**: \\ | ||
| + | Factory engine breather valves on all Evo Sportsters are inside the engine. \\ | ||
| + | The lines / hoses that leave the engine and any apparatus to route the air to different places are part of the venting system. \\ | ||
| + | Many aftermarket manufacturers advertise that they are selling "Engine Breathers when they are actually only selling the vent line / tube assemblies. \\ | ||
| + | |||
| * In 2004 the MoCo made some changes to the umbrella valve configuration. \\ The umbrella was retained but now inside a plastic housing with a pre-umbrella oil separating screen. \\ Each 'breather valve' is assembled into a plastic fitting that is sealed over the outlet hole in the lower rocker box to the head breather bolt. \\ The new breather valves were also accompanied with new style hollow air cleaner mounting bolts for the pressure to escape. | * In 2004 the MoCo made some changes to the umbrella valve configuration. \\ The umbrella was retained but now inside a plastic housing with a pre-umbrella oil separating screen. \\ Each 'breather valve' is assembled into a plastic fitting that is sealed over the outlet hole in the lower rocker box to the head breather bolt. \\ The new breather valves were also accompanied with new style hollow air cleaner mounting bolts for the pressure to escape. | ||
| * The new bolts are the same thread size as previous. \\ But instead of a simple hex, it also has a shoulder past the hex for an O-ring to be fitted between the hex head and the air cleaner. | * The new bolts are the same thread size as previous. \\ But instead of a simple hex, it also has a shoulder past the hex for an O-ring to be fitted between the hex head and the air cleaner. | ||
