Table of Contents
This is an old revision of the document!
EVO: Engine Mechanicals - Sub-09E
Pics and Information on 1986-2003 Motor Mounts
- 1986-1991 top center mount:
- 86-91 top center mounts are identical except for the finish.
883 center mounts had a natural metal finish and 1200s were black powder coat. - Both have a 3/8“ vertical hole near the left center end of the base plate for the key switch cover to bolt (under) the motor mount.
- Both have a 1/4” hole through the back plate to bolt the VOES to the rear side of the mount.
- Both have a slotted hole through the “ears” that mount to each head for adjustment.
- There is minimal welding on the back of the side plates that attach to the base of the mount.
1986-1991 883 Sportster Top Center Motor Mount 1) | ||
1986-1987 1100, 1988-1991 1200 Sportster Top Center Motor Mount (16278-86) 2) | ||
1992-1993 Sportster Top Center Motor Mount Bracket (16278-86A) 3) | ||
1994 Sportster Top Center Motor Mount Bracket (16278-86B) 4) | ||
1995-1996 Sportster Top Center Motor Mount (16278-95) 5) | ||
1998-2003 Sportster Top Center Motor Mount Bracket (16278-95B) 6) | ||
1)
photos courtesy of c3cycle.com https://www.c3cycle.com/
4)
photos courtesy of IXL2Relax of the XLFORUM