Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
techtalk:evo:oil03c [2023/12/25 23:14] hippysmack |
techtalk:evo:oil03c [2023/12/25 23:17] (current) hippysmack |
||
|---|---|---|---|
| Line 100: | Line 100: | ||
| * One is smooth along the shank with a single raised barb ring near the spigot end. \\ (these are easily removable/replaceable but placement of the hose clamp is fairly critical) | * One is smooth along the shank with a single raised barb ring near the spigot end. \\ (these are easily removable/replaceable but placement of the hose clamp is fairly critical) | ||
| * The other has multiple cone-shaped barb rings along the shank. \\ (more secure & clamp placement is not critical). \\ But you almost always have to cut the hose off to remove it. | * The other has multiple cone-shaped barb rings along the shank. \\ (more secure & clamp placement is not critical). \\ But you almost always have to cut the hose off to remove it. | ||
| - | * Either type should work fine-- it's much more critical to be sure the fitting and the hose size match exactly. ((JacksBrother of the xlforum http://xlforum.net/forums/showthread.php?t=1977681&highlight=oil+pump+gear&page=2)) | + | * Either type should work fine-- it's much more critical to be sure the fitting and the hose size match exactly. ((JacksBrother of the xlforum https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/frame-mount-evo-sportster-talk-1986-2003-models/183969-buell-pump-on-a-1990-xl-i-need-help/page2?t=1977681&highlight=oil+pump+gear&page=2)) |
| |{{:techtalk:evo:oil:89-07_oil_pump_upgrade_3_by_gary_e.jpg?direct&300|}}|{{:techtalk:evo:oil:07_oil_pump_upgrade_2._by_dave76.jpg?direct&300|}}| | |{{:techtalk:evo:oil:89-07_oil_pump_upgrade_3_by_gary_e.jpg?direct&300|}}|{{:techtalk:evo:oil:07_oil_pump_upgrade_2._by_dave76.jpg?direct&300|}}| | ||
