Differences

This shows you the differences between two versions of the page.

--- techtalk:ih:carb01m [2019/09/21 16:50]
hippysmack [Check Valve]
+++ techtalk:ih:carb01m [2019/09/21 18:44]
hippysmack [Overflow Tube]
@@ Line 8: / Line 8: @@
   * [[techtalk:ih:carb01l|Rebuilding the Bendix Carb]]
+====== Parts / Functions ======
 ===== Main Jet / IdleTube =====
@@ Line 24: / Line 24: @@
   * Turning clockwise = leaner.
   * Turning counter-clockwise = richer.
 ==== Main jet ====
@@ Line 29: / Line 30: @@
 The main jet screw is the one closest to the air cleaner. The Idle screw is closer to the manifold. \\
 The main jet doubles as the float bowl securing bolt under the carb. \\
 ==== Idle Tube ====
@@ Line 57: / Line 56: @@
 The later adjustable main is favorable if mounting on an early magneto motor as you do not have to pull the carb off to make main adjustments. \\
+===== Float =====
+===== Float Bowl =====
-===== Float =====
+==== Check Valve ====
-===== Check Valve =====
 The check valve is press fit into the bowl (yellow circle below) and has two main functions.
   - It feeds gas to the  accelerator passage in the bottom of the bowl.
@@ Line 72: / Line 71: @@
 {{:techtalk:ih:carb:clearing_the_bendix_accel_pump_by_the_doctor71.jpg?direct&300|}} ((photo by The Doctor71 of the XLFORUM  http://xlforum.net/forums/showthread.php?t=2071854))  {{:techtalk:ih:carb:original_bendix_check_valve_1_by_the_doctor71.jpg?direct&300|}} ((photo by The Doctor71 of the XLFORUM http://xlforum.net/forums/showthread.php?t=2074658))
 {{:techtalk:ih:carb:original_bendix_check_valve_2_by_the_doctor71.jpg?direct&300|}} ((photo by The Doctor71 of the XLFORUM http://xlforum.net/forums/showthread.php?t=2074658)) \\
 {{:techtalk:ih:carb:original_bendix_check_valve_3_by_the_doctor71.jpg?direct&300|}} ((photo by The Doctor71 of the XLFORUM http://xlforum.net/forums/showthread.php?t=2074658))
 {{:techtalk:ih:carb:original_bendix_check_valve_4_by_the_doctor71.jpg?direct&300|}} ((photo by The Doctor71 of the XLFORUM http://xlforum.net/forums/showthread.php?t=2074658))
 {{:techtalk:ih:carb:original_bendix_check_valve_5_by_the_doctor71.jpg?direct&300|}} ((photo by The Doctor71 of the XLFORUM http://xlforum.net/forums/showthread.php?t=2074658)) \\
 ===== Choke Plate \ Cable =====
@@ Line 164: / Line 165: @@
 The dowel is on the bottom side and the set screw is on top side in the pic below. \\
 {{:techtalk:ih:carb:throttle_cable_mod_by_piniongear.jpg?direct&300|}} ((photo by piniongear of the XLFORUM http://xlforum.net/forums/showthread.php?t=1480481&page=2)) \\
 ===== Carb / A/C Brace =====