This is an old revision of the document!


IH: Coil: Engine Control - Sub-01B

  • A quantity of ignition coils (31609-80) used on all 1980 models, failed at low mileage. The problem was an internal breakdown of the windings within the coil. This is a failure that could lead to poor vehicle performance and a possible fouled spark plug. 1)
  • Upon inspection of an ignition related failure, follow the diagnostic procedure outlined in the service manual. Inspect the primary and secondary coil resistance with an ohmmeter.
  • Resistances should be:
    • Primary: 3.3-3.7 Ohms
    • Secondary: 16500-19500 Ohms


1)
HD Service Bulletin #M-793 dated July 3, 1980
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies