This is an old revision of the document!
IH: Engine Control - Sub-01F
Pics and information on Ironhead Coils and Bracketry
1965-1966 XLH had a 12v coil mounted on a two holed boss under the seat casting on the right side of the bike with an angled plate (31727-65) holding the coil on.
Bracket (51526-52A) bolted to top of the seat casting over the plunger holes with an angled plate (31727-65) holding the coil on.
1)
photo by Moon Wolf of the XLFORUM http://xlforum.net/forums/showthread.php?t=1062720&page=17
2)
photo courtesy of TomsCyberShop.com www.TomsCyberShop.com
3)
photo courtesy of Ebay seller, Jrs Vintage Harley 1990, Link to Ebay Store
4)
photo by The Doctor 71 of the XLFORUM http://xlforum.net/forums/showthread.php?t=2000541