Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
techtalk:ih:engctl02 [2020/03/09 09:42]
ixl2relax [Solenoid]
techtalk:ih:engctl02 [2020/03/09 09:48] (current)
ixl2relax [Solenoid]
Line 65: Line 65:
 ====== Solenoid ====== ====== Solenoid ======
  
-A typical well-made solenoid as two windings connected to the small terminal. ((Oldwrench of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=522413&​page=2)) \\ 
-One coil (HOLD-IN) goes to solenoid case ground and the other (PULL-IN) goes to the big terminal for the starter lead.\\ 
-When you hit the starter button, battery voltage goes thru the starter relay into the solenoid small terminal, then goes\\ 
-·· thru the '​PULL-IN'​ windings (which are grounded thru the starter motor) and thru the '​HOLD-IN'​ windings (to case ground).\\ 
 {{ :​techtalk:​ih:​engctl:​72-xlh-startersolenoid-operation.jpg?​400|}} {{ :​techtalk:​ih:​engctl:​72-xlh-startersolenoid-operation.jpg?​400|}}
 +A typical well-made solenoid as two windings connected to the small terminal. ((Oldwrench of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=522413&​page=2)) \\
 +One coil (HOLD-IN) goes to solenoid case ground and the other (PULL-IN) goes to a big terminal (starter lead).\\
 +When you hit the starter button, battery voltage goes thru the starter relay into the solenoid small terminal,\\
 +·· then goes thru the '​PULL-IN'​ windings (which are grounded thru the starter motor) and thru\\
 +·· the '​HOLD-IN'​ windings (to the case ground).\\
 **When these coils are activated together, they pull the plunger in.** **When these coils are activated together, they pull the plunger in.**