Differences

This shows you the differences between two versions of the page.

--- techtalk:ih:oil03f [2019/12/20 21:55]
hippysmack [Check Spring]
+++ techtalk:ih:oil03f [2019/12/21 20:23]
hippysmack [Check Ball]
@@ Line 3: / Line 3: @@
 ====== 57-76 Oil Pump - Individual Parts and Pics ======
-====== Check Ball ======
+====== Oil Check Valve ======
+The oil pump check valve is in the front of the oil pump> It's a spring and a steel ball set up. \\
+The red area in the pic below is the spring & ball sit. \\
+{{:techtalk:ih:oil:57-76_oil_pump_check_valve_location_by_ironheadjunkie_annotated_by_hippysmack.jpg?direct&300|}} ((photo by ironheadjunkie of the XLFORUM http://xlforum.net/forums/showthread.php?t=1490437)) \\
+===== Check Ball =====
+See also [[techtalk:ih:oil03g#check_ball_seat_repair|Check ball seat repair]] in the IH Oil Pump section of the Sportsterpedia. \\
 Used until mid 1958, the tail of check fits inside the hollow center guide bore of the fitting. ((photo by Dr Dick of the XLFORUM http://xlforum.net/forums/showthread.php?t=1347614&page=2)) \\

Trace: