Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
techtalk:ih:oil04 [2021/05/23 21:24] hippysmack [Connections Using an Oil Cooler] |
techtalk:ih:oil04 [2024/01/01 20:42] hippysmack |
||
---|---|---|---|
Line 8: | Line 8: | ||
* [[techtalk:ih:oil04f|Pics and Information on 1958-1965 XLCH "Horseshoe" Oil Tanks]] | * [[techtalk:ih:oil04f|Pics and Information on 1958-1965 XLCH "Horseshoe" Oil Tanks]] | ||
* [[techtalk:ih:oil04g|Pics and Information on 1966-E1973 XLCH "Lunchbox" Oil Tanks]] | * [[techtalk:ih:oil04g|Pics and Information on 1966-E1973 XLCH "Lunchbox" Oil Tanks]] | ||
- | * [[techtalk:ih:oil04h|Pics and Information on L1973-1978 XLCH Oil Tanks]] | + | * [[techtalk:ih:oil04h|Pics and Information on L1973-1978 XLCH "Lunchbox" Oil Tanks]] |
* [[techtalk:ih:oil04i|Pics and Information on 1977-1978 XLCR Oil Tanks]] | * [[techtalk:ih:oil04i|Pics and Information on 1977-1978 XLCR Oil Tanks]] | ||
* [[techtalk:ih:oil04j|Pics and Information on 1979-1981 Sportster Oil Tanks]] | * [[techtalk:ih:oil04j|Pics and Information on 1979-1981 Sportster Oil Tanks]] | ||
Line 15: | Line 15: | ||
* [[techtalk:ih:oil04m|1982-1993 Sportster Retrofit Oil Tank Kit (except XR-1000)]] | * [[techtalk:ih:oil04m|1982-1993 Sportster Retrofit Oil Tank Kit (except XR-1000)]] | ||
* [[techtalk:evo:oil04k|How to Distinguish Between 1982-2001 Oil Tanks at a Glance]] | * [[techtalk:evo:oil04k|How to Distinguish Between 1982-2001 Oil Tanks at a Glance]] | ||
+ | * [[techtalk:ih:oil04r|Pics and Information on XR-1000 Oil Tanks]] | ||
\\ | \\ | ||
Line 58: | Line 59: | ||
\\ | \\ | ||
- | The OD of the oil & vent lines is as important as the ID. ((IronMick of the XLFORUM http://xlforum.net/forums/showthread.php?t=563241&page=2)) \\ | + | The OD of the oil & vent lines is as important as the ID. ((IronMick of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/78212-67-ironhead-oil-routing/page2?t=563241&page=2)) \\ |
If you buy automotive lines that are larger OD, they will be difficult to run in the limited space and easy to kink. \\ | If you buy automotive lines that are larger OD, they will be difficult to run in the limited space and easy to kink. \\ | ||
Feed and Return: 3/8" ID X 5/8" OD reinforced rubber was introduced in 1969. \\ | Feed and Return: 3/8" ID X 5/8" OD reinforced rubber was introduced in 1969. \\ | ||
Vent: 1/4" ID, 1/2" OD reinforced rubber also introduced in 1969. \\ | Vent: 1/4" ID, 1/2" OD reinforced rubber also introduced in 1969. \\ | ||
- | The tank is vented to the cam chest because it applies a slightly negative pressure to the tank. ((ryder rick of the XLFORUM http://xlforum.net/forums/showthread.php?t=600218&page=2)) \\ | + | The tank is vented to the cam chest because it applies a slightly negative pressure to the tank. ((ryder rick of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/81492-oil-lines/page2?t=600218&page=2)) \\ |
This promotes the evacuation of condensate from the tank and keeps the tank from being pressurized (by the air that is also returned by the scavenge pump). \\ | This promotes the evacuation of condensate from the tank and keeps the tank from being pressurized (by the air that is also returned by the scavenge pump). \\ | ||
General oil line routing on AMF Sportsters: \\ | General oil line routing on AMF Sportsters: \\ | ||
- | The vent and the return lines route under the starter and solenoid. (can't run over them since the exhaust is there) ((74XL of the XLFORUM http://xlforum.net/forums/showthread.php?t=80209)) \\ | + | The vent and the return lines route under the starter and solenoid. (can't run over them since the exhaust is there) ((74XL of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/39441-oil-line-routing-but-not-the-typical-question?t=80209)) \\ |
- | Use care under the starter as to not kink or flatten the lines (rubber or copper) ((garbiker of the XLFORUM http://xlforum.net/forums/showthread.php?t=80209&page=2)) \\ | + | Use care under the starter as to not kink or flatten the lines (rubber or copper) ((garbiker of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/39441-oil-line-routing-but-not-the-typical-question/page2?t=80209&page=2)) \\ |
Feed line runs out the bottom of the oil tank, close to the chain, around the swing arm and under. \\ | Feed line runs out the bottom of the oil tank, close to the chain, around the swing arm and under. \\ | ||
- | The filter and cooler are (plumbed) in the return line. ((IronMick of the XLFORUM http://xlforum.net/forums/showthread.php?t=783392&page=2)) \\ | + | The filter and cooler are (plumbed) in the return line. ((IronMick of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/94405-oil-line-routing-on-an-84/page2?t=783392&page=2)) \\ |
===== Oil Line Routing ===== | ===== Oil Line Routing ===== | ||
+ | XLCH models did not come with a factory fitted oil filter. 1957-1978 XL, XLH models were factory fitted with oil filters inside the oil tank. \\ | ||
+ | You can swap to an external oil filter on XLH or add an external filter to an XLCH. \\ | ||
+ | [[techtalk:ref:oil13|Click Here]] to reference External Oil Filters in the REF section of the Sportsterpedia. \\ | ||
* **1957-1966 XLH and 1958-1969 XLCH**: | * **1957-1966 XLH and 1958-1969 XLCH**: | ||
Line 96: | Line 100: | ||
* 83-85: Drain hose is attached to the tank, runs across the bike terminating on a welded steel plug under the battery tray. | * 83-85: Drain hose is attached to the tank, runs across the bike terminating on a welded steel plug under the battery tray. | ||
- | **Simplified Oil Line Routing Drawings**: ((drawings by Hippysmack)) \\ | + | **Simplified OEM Oil Line Routing Drawings**: ((drawings by Hippysmack)) \\ |
Click on a drawing to enlarge: \\ | Click on a drawing to enlarge: \\ | ||
Proper line routing is crucial. Mixing up the line connections can destroy your engine! \\ | Proper line routing is crucial. Mixing up the line connections can destroy your engine! \\ | ||
Line 104: | Line 108: | ||
{{:techtalk:ih:oil:simplified_oil_routing_79-82_sportster_by_hippysmack.png?direct&300|}} {{:techtalk:ih:oil:simplified_oil_routing_83-e84_sportster_by_hippysmack.png?direct&300|}} {{:techtalk:ih:oil:simplified_oil_routing_l84-85_sportster_by_hippysmack.png?direct&300|}} \\ | {{:techtalk:ih:oil:simplified_oil_routing_79-82_sportster_by_hippysmack.png?direct&300|}} {{:techtalk:ih:oil:simplified_oil_routing_83-e84_sportster_by_hippysmack.png?direct&300|}} {{:techtalk:ih:oil:simplified_oil_routing_l84-85_sportster_by_hippysmack.png?direct&300|}} \\ | ||
- | There is a steel bracket that holds the oil line in position. ((Hopper of the XLFORUM http://xlforum.net/forums/showthread.php?t=80209&page=2)) \\ | + | There is a steel bracket that holds the oil line in position. ((Hopper of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/39441-oil-line-routing-but-not-the-typical-question/page2?t=80209&page=2)) \\ |
It mounts onto one of the rear engine mount or case bolts and keeps the line away from the chain.\\ | It mounts onto one of the rear engine mount or case bolts and keeps the line away from the chain.\\ | ||
The bracket is a piece of .060" sheet metal about 3/4" wide and maybe 3" long with a hole in one end where the bolt passes through it. \\ | The bracket is a piece of .060" sheet metal about 3/4" wide and maybe 3" long with a hole in one end where the bolt passes through it. \\ | ||
The other end is bent in a half circle that fits over the oil line and holds it against the frame / engine. \\ | The other end is bent in a half circle that fits over the oil line and holds it against the frame / engine. \\ | ||
- | | Feed line behind the chain on 73 XLCH ((photo by Rush of the XLFORUM http://xlforum.net/forums/showthread.php?t=80209)) | Missing clamp allows the chain to rub the hose. ((photo by Dutch Bobber of the XLFORUM http://xlforum.net/forums/showthread.php?t=2072104&highlight=oil+filter&page=2)) | A steel line was used to replace the rubber hose. ((photo by Dutch Bobber of the XLFORUM http://xlforum.net/forums/showthread.php?t=2072104&highlight=oil+filter&page=2)) | | + | | Feed line behind the chain on 73 XLCH ((photo by Rush of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/39441-oil-line-routing-but-not-the-typical-question?t=80209)) | Missing clamp allows the chain to rub the hose. ((photo by Dutch Bobber of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/195705-ironhead-project/page2?t=2072104&highlight=oil+filter&page=2)) | A steel line was used to replace the rubber hose. ((photo by Dutch Bobber of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/195705-ironhead-project/page2?t=2072104&highlight=oil+filter&page=2)) | |
|{{:techtalk:ih:oil:73_xlch_chain_and_tank_oil_line_by_rush.jpg?direct&300|}}|{{:techtalk:ih:oil:chain_rubbing_oil_line_by_dutch_bobber.jpg?direct&300|}}|{{:techtalk:ih:oil:steel_oil_line_replacement_by_dutch_bobber.jpg?direct&300|}}| | |{{:techtalk:ih:oil:73_xlch_chain_and_tank_oil_line_by_rush.jpg?direct&300|}}|{{:techtalk:ih:oil:chain_rubbing_oil_line_by_dutch_bobber.jpg?direct&300|}}|{{:techtalk:ih:oil:steel_oil_line_replacement_by_dutch_bobber.jpg?direct&300|}}| | ||
77-85: \\ | 77-85: \\ | ||
The oil return comes off the front of the oil pump, not the top of the case like earlier years. \\ | The oil return comes off the front of the oil pump, not the top of the case like earlier years. \\ | ||
- | Essentially you have the following lines: ((ericfreeman of the XLFORUM http://xlforum.net/forums/showthread.php?t=600218)) \\ | + | Essentially you have the following lines: ((ericfreeman of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/81492-oil-lines?t=600218)) \\ |
Feed: From the bottom of the oil tank to the rear fitting (inlet) on the oil pump. \\ | Feed: From the bottom of the oil tank to the rear fitting (inlet) on the oil pump. \\ | ||
Return: From the top of the oil tank to the front oil pump fitting close to the pressure switch. \\ (perhaps after going through a cooler) \\ | Return: From the top of the oil tank to the front oil pump fitting close to the pressure switch. \\ (perhaps after going through a cooler) \\ | ||
Vent: From the top of the oil tank to the 1/4" hose nipple on the upper backside of the cam cover in front of the sprocket. \\ | Vent: From the top of the oil tank to the 1/4" hose nipple on the upper backside of the cam cover in front of the sprocket. \\ | ||
- | | Oil Lines on 77 XLCH. ((photos by Hopper of the XLFORUM http://xlforum.net/forums/showthread.php?t=209347&page=10)) || | + | | Oil Lines on 77 XLCH. ((photos by Hopper of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/50355-and-yet-another-77-ground-up-rebuild/page10?t=209347&page=10)) || |
|{{:techtalk:ih:oil:oil_line_routing_2_by_hopper.jpg?direct&300|}}|{{:techtalk:ih:oil:oil_line_routing_4_by_hopper.jpg?direct&300|}}| | |{{:techtalk:ih:oil:oil_line_routing_2_by_hopper.jpg?direct&300|}}|{{:techtalk:ih:oil:oil_line_routing_4_by_hopper.jpg?direct&300|}}| | ||
Line 159: | Line 163: | ||
==== 1957-1978 XL, XLH "Kidney" Tanks ==== | ==== 1957-1978 XL, XLH "Kidney" Tanks ==== | ||
- | | Kidney tank on 1964 XLH ((photo by Magneto Sportster of the XLFORUM, labeled by Hippysmack http://xlforum.net/forums/showthread.php?t=2075542&page=4)) | 1970 XLH Style Kidney Tank ((photo by golfish of the XLFORUM, labeled by Hippysmack http://xlforum.net/forums/showthread.php?t=1838788)) | | + | | Kidney tank on 1964 XLH ((photo by Magneto Sportster of the XLFORUM, labeled by Hippysmack https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/198705-magneto-sportster-s-1964-xlh-restoration-project/page4?t=2075542&page=4)) | 1970 XLH Style Kidney Tank ((photo by golfish of the XLFORUM, labeled by Hippysmack https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/171411-battery-tray-and-oil-tank-mount-its-not-plug-n-play?t=1838788)) | |
|{{:techtalk:ih:oil:1964_xlh_kidney_oil_tank_by_magneto_sportster_-_labeled_by_hippysmack.jpg?direct&300|}}|{{:techtalk:ih:oil:1970_xlh_oil_tank_by_golfish.jpg?direct&300|}}| | |{{:techtalk:ih:oil:1964_xlh_kidney_oil_tank_by_magneto_sportster_-_labeled_by_hippysmack.jpg?direct&300|}}|{{:techtalk:ih:oil:1970_xlh_oil_tank_by_golfish.jpg?direct&300|}}| | ||
Line 174: | Line 178: | ||
* The lone fitting rear of the center flange is the feed (straight 3/8" hose barb). | * The lone fitting rear of the center flange is the feed (straight 3/8" hose barb). | ||
* The fitting forward of the flange on the left (primary) side of the tank is the return and also uses a straight 3/8" hose barb. | * The fitting forward of the flange on the left (primary) side of the tank is the return and also uses a straight 3/8" hose barb. | ||
- | * The fitting forward of the flange on the right (cam side) is the tank vent uses a 90° hose barb fitting for a 1/4" hose. ((Dr Dick of the XLFORUM http://xlforum.net/forums/showthread.php?p=5442638#post5442638)) | + | * The fitting forward of the flange on the right (cam side) is the tank vent uses a 90° hose barb fitting for a 1/4" hose. ((Dr Dick of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/186147-1970-lunchbox-oil-tank-routing#post3984656)) |
* The drain plug is on the right bottom corner. \\ | * The drain plug is on the right bottom corner. \\ | ||
- | {{:techtalk:ih:oil:1966-1969_xlch_oil_tank_fittings_by_bwf347.jpg?direct&300|}} ((photo by Bwf347 of the XLFORUM http://xlforum.net/forums/showthread.php?p=5895071#post5895071)) \\ | + | {{:techtalk:ih:oil:1966-1969_xlch_oil_tank_fittings_by_bwf347.jpg?direct&300|}} ((photo by Bwf347 of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/202237-xlch-lunchbox-on-xlh-frame#post4499469)) \\ |
- | {{:techtalk:ih:oil:1970-e1973_xlch_oil_tank_pic1_by_bwf347.jpg?direct&300|}} ((photos by Bwf347 of the XLFORUM http://xlforum.net/forums/showthread.php?p=5895117#post5895117)) {{:techtalk:ih:oil:1970-e1973_xlch_oil_tank_pic2_by_bwf347.jpg?direct&300|}} ((photos by Bwf347 of the XLFORUM http://xlforum.net/forums/showthread.php?p=5895117#post5895117)) {{:techtalk:ih:oil:1970-e1973_xlch_oil_tank_pic3_by_bwf347.jpg?direct&300|}} ((photos by Bwf347 of the XLFORUM http://xlforum.net/forums/showthread.php?p=5895117#post5895117)) \\ | + | {{:techtalk:ih:oil:1970-e1973_xlch_oil_tank_pic1_by_bwf347.jpg?direct&300|}} ((photos by Bwf347 of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/202237-xlch-lunchbox-on-xlh-frame#post4499515)) {{:techtalk:ih:oil:1970-e1973_xlch_oil_tank_pic2_by_bwf347.jpg?direct&300|}} ((photos by Bwf347 of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/202237-xlch-lunchbox-on-xlh-frame#post4499515)) {{:techtalk:ih:oil:1970-e1973_xlch_oil_tank_pic3_by_bwf347.jpg?direct&300|}} ((photos by Bwf347 of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/202237-xlch-lunchbox-on-xlh-frame#post4499515)) \\ |
{{:techtalk:ih:oil:l1973-1978_xlch_oil_tank_pic1_by_paraord.jpg?direct&300|}} ((photo by paraord of the XLFORUM)) {{:techtalk:ih:oil:l1973-1978_xlch_oil_tank_pic2_by_paraord.jpg?direct&300|}} ((photo by paraord of the XLFORUM)) {{:techtalk:ih:oil:l1973-1978_xlch_oil_tank_pic3_by_paraord.jpg?direct&300|}}((photo by paraord of the XLFORUM)) \\ | {{:techtalk:ih:oil:l1973-1978_xlch_oil_tank_pic1_by_paraord.jpg?direct&300|}} ((photo by paraord of the XLFORUM)) {{:techtalk:ih:oil:l1973-1978_xlch_oil_tank_pic2_by_paraord.jpg?direct&300|}} ((photo by paraord of the XLFORUM)) {{:techtalk:ih:oil:l1973-1978_xlch_oil_tank_pic3_by_paraord.jpg?direct&300|}}((photo by paraord of the XLFORUM)) \\ | ||
Line 190: | Line 194: | ||
The drain plug is on the left bottom (79) and left side at the bottom (80-81). \\ | The drain plug is on the left bottom (79) and left side at the bottom (80-81). \\ | ||
- | {{:techtalk:ih:oil:1979_sportster_oil_tank_by_smerch.jpg?direct&300|}} (((photo by smerch of the XLFORUM http://xlforum.net/forums/showthread.php?p=3879862&highlight=oil+tank#post3879862)) {{:techtalk:ih:oil:1980-1981_sportster_oil_tank_fittings_by_cycle_warehouse.png?direct&300|}} ((photo courtesy of Cycle Warehouse https://cyclewarehouse.online/ (Ebay seller cyclewarehouse) )) | + | {{:techtalk:ih:oil:1979_sportster_oil_tank_by_smerch.jpg?direct&300|}} (((photo by smerch of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/133270-oil-line-routing-79-ironhead?highlight=oil+tank#post2842854)) {{:techtalk:ih:oil:1980-1981_sportster_oil_tank_fittings_by_cycle_warehouse.png?direct&300|}} ((photo courtesy of Cycle Warehouse https://cyclewarehouse.online/ (Ebay seller cyclewarehouse) )) |
==== 1982-1993 Sportster Oil Tank ==== | ==== 1982-1993 Sportster Oil Tank ==== | ||
Line 200: | Line 204: | ||
1983-1993: The drain is the bigger straight nipple on the back near the bottom of the tank (1/2" hose fitting). \\ | 1983-1993: The drain is the bigger straight nipple on the back near the bottom of the tank (1/2" hose fitting). \\ | ||
- | {{:techtalk:ih:oil:1982_sportster_oil_tank_fittings.png?direct&300|}} ((1982 Sportster Oil Tank (used with permission) )) {{:techtalk:ih:oil:1983-1993_sportster_oil_tank_by_billeuze.jpg?direct&300|}} ((photo by billeuze of the XLFORUM http://xlforum.net/forums/showthread.php?t=1192983)) \\ | + | {{:techtalk:ih:oil:1982_sportster_oil_tank_fittings.png?direct&300|}} ((1982 Sportster Oil Tank (used with permission) )) {{:techtalk:ih:oil:1983-1993_sportster_oil_tank_by_billeuze.jpg?direct&300|}} ((photo by billeuze of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/121711-new-oil-lines?t=1192983)) \\ |
===== Connections at the Oil Filter ===== | ===== Connections at the Oil Filter ===== | ||
[[techtalk:ref:oil13|Click Here]] to reference "**Remote Oil Filters**" in the REF section of the Sportsterpedia for plumbing, connections and custom applications. \\ | [[techtalk:ref:oil13|Click Here]] to reference "**Remote Oil Filters**" in the REF section of the Sportsterpedia for plumbing, connections and custom applications. \\ | ||
- | The oil filter (HD 63782-80T) is the small one that is usually used on custom bikes. Chrome or black can be found. ((IronMick of the XLFORUM http://xlforum.net/forums/showthread.php?t=563241)) \\ | + | The oil filter (HD 63782-80T) is the small one that is usually used on custom bikes. Chrome or black can be found. ((IronMick of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/78212-67-ironhead-oil-routing?t=563241)) \\ |
- | On all spin on oil filters, dirty oil goes in the outside of the filter. Clean oil comes out the center. (( ryder rick of the XLFORUM http://xlforum.net/forums/showthread.php?p=5643382&highlight=oil+filter+bracket#post5643382)) \\ | + | On all spin on oil filters, dirty oil goes in the outside of the filter. Clean oil comes out the center. (( ryder rick of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/192457-oil-line-connecting-oil-filter-late-84/page2?highlight=oil+filter+bracket#post4166360)) \\ |
If you are not sure, start the motor momentarily with the filter off and if oil is pumped out the center port, you have it backwards. \\ | If you are not sure, start the motor momentarily with the filter off and if oil is pumped out the center port, you have it backwards. \\ | ||
Line 213: | Line 217: | ||
===== Connections at the Engine ===== | ===== Connections at the Engine ===== | ||
- | |Oil line connections on a 61 XLCH ((photo by ironheadjunkie of the XLFORUM http://xlforum.net/forums/showthread.php?threadid=1313106)) \\ Fittings (L) Return, (R) Feed, (hole) Vent|Oil line connections on a 67 XLCH ((photo by knotwerk of the XLFORUM http://xlforum.net/forums/showthread.php?t=563241)) \\ 1- Return to tank, 2- Feed to motor, 3- Vent hose ((Monte03 of the XLFORUM http://xlforum.net/forums/showthread.php?t=563241))| | + | |Oil line connections on a 61 XLCH ((photo by ironheadjunkie of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/127716-need-a-little-help-on-oil-line-routing-please?threadid=1313106)) \\ Fittings (L) Return, (R) Feed, (hole) Vent|Oil line connections on a 67 XLCH ((photo by knotwerk of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/78212-67-ironhead-oil-routing?t=563241)) \\ 1- Return to tank, 2- Feed to motor, 3- Vent hose ((Monte03 of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/78212-67-ironhead-oil-routing?t=563241))| |
|{{:techtalk:ih:oil:61_oil_line_routing_by_ironheadjunkie.jpg?direct&300|}}|{{:techtalk:ih:oil:67_oil_routing_1_by_knotwerk.jpg?direct&300|}}| | |{{:techtalk:ih:oil:61_oil_line_routing_by_ironheadjunkie.jpg?direct&300|}}|{{:techtalk:ih:oil:67_oil_routing_1_by_knotwerk.jpg?direct&300|}}| | ||
- | | Oil lines on a 71 XLH w/ \\ custom mounted oil tank bungs ((photo by JonesL of the XLFORUM http://xlforum.net/forums/showthread.php?t=2071385&highlight=oil+filter)) | Oil lines on a 72 XLCH (no filter) ((photo by Scuba10jdl of the XLFORUM http://xlforum.net/forums/showthread.php?t=2071385&highlight=oil+filter)) | | + | | Oil lines on a 71 XLH w/ \\ custom mounted oil tank bungs ((photo by JonesL of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/195090-oil-line-routing-a-thought?t=2071385&highlight=oil+filter)) | Oil lines on a 72 XLCH (no filter) ((photo by Scuba10jdl of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/195090-oil-line-routing-a-thought?t=2071385&highlight=oil+filter)) | |
|{{:techtalk:ih:oil:71_xlh_oil_lines_by_jonesl.jpg?direct&150|}}|{{:techtalk:ih:oil:72_xlch_oil_line_routing_by_scuba10jdl.jpg?direct&300|}}| | |{{:techtalk:ih:oil:71_xlh_oil_lines_by_jonesl.jpg?direct&150|}}|{{:techtalk:ih:oil:72_xlch_oil_line_routing_by_scuba10jdl.jpg?direct&300|}}| | ||
- | | Oil lines on a 74 XLH ((photo by vyper202 of the XLFORUM http://xlforum.net/forums/showthread.php?t=1570042)) | Oil fittings on a 75 custom ((photo by sifty of the XLFORUM http://xlforum.net/forums/showthread.php?t=1592463&page=29)) | Oil lines on a 75 XLH ((photo by Dieselox4 of the XLFORUM http://xlforum.net/forums/showthread.php?t=475120)) | | + | | Oil lines on a 74 XLH ((photo by vyper202 of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/144736-my-strange-oil-plumbing-pic-heavy?t=1570042)) | Oil fittings on a 75 custom ((photo by sifty of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/146604-first-harley-1975-xl1000-caf%C3%A9-project/page29?t=1592463&page=29)) | Oil lines on a 75 XLH ((photo by Dieselox4 of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-styles/chopper-bobber-talk/70226-oil-tank-question?t=475120)) | |
|{{:techtalk:ih:oil:74_oil_line_routing_3_by_vyper202.jpg?direct&300|}}|{{:techtalk:ih:oil:75_oil_routing_by_sifty.jpg?direct&300|}}|{{:techtalk:ih:oil:75_oil_routing_by_dieselox4.jpg?direct&300|}}| | |{{:techtalk:ih:oil:74_oil_line_routing_3_by_vyper202.jpg?direct&300|}}|{{:techtalk:ih:oil:75_oil_routing_by_sifty.jpg?direct&300|}}|{{:techtalk:ih:oil:75_oil_routing_by_dieselox4.jpg?direct&300|}}| | ||
- | This pic of a 74 model shows the chain oiler fitting (circled in green) which is usually just plugged off. ((ironheadjunkie of the XLFORUM http://xlforum.net/forums/showthread.php?t=1613141)) \\ | + | This pic of a 74 model shows the chain oiler fitting (circled in green) which is usually just plugged off. ((ironheadjunkie of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/148522-74-oil-line-return-to-tank-from?t=1613141)) \\ |
The one circled in red is the vent return to the tank. \\ | The one circled in red is the vent return to the tank. \\ | ||
- | |Oil fittings on a 74 model ((photo by whyNot, of the XLFORUM, as labeled by ironheadjunkie http://xlforum.net/forums/showthread.php?t=1613141&page=2)) | | + | |Oil fittings on a 74 model ((photo by whyNot, of the XLFORUM, as labeled by ironheadjunkie https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/148522-74-oil-line-return-to-tank-from/page2?t=1613141&page=2)) | |
|{{:techtalk:ih:oil:74_oil_fittings_under_the_cover_by_whynot-_annotated.jpg?direct&200|}}| | |{{:techtalk:ih:oil:74_oil_fittings_under_the_cover_by_whynot-_annotated.jpg?direct&200|}}| | ||
+ | ===== Connections Using an Oil Cooler ===== | ||
+ | XLCH models did not come with a factory fitted oil filter. 1957-1978 XL, XLH models were factory fitted with oil filters inside the oil tank. \\ | ||
+ | You can swap to an external oil filter on XLH or add an external filter to an XLCH. \\ | ||
+ | [[techtalk:ref:oil13|Click Here]] to reference External Oil Filters in the REF section of the Sportsterpedia. \\ | ||
+ | [[techtalk:ref:oil14|Click Here]] to reference External Oil Coolers in the REF section of the Sportsterpedia (includes hose routing pics). \\ | ||
+ | **Notes**: \\ | ||
+ | * **The oil cooler is plumbed into the RETURN side of the oiling system**. | ||
+ | * All oil coolers and lines are installed in the part of the oil flow loop that returns engine oil to the oil tank. \\ The oil outlet must direct oil flow into oil filter or the return hose to the oil tank. \\ **CAUTION**: DO NOT CONNECT THE OIL COOLER IN THE FEED PATH BETWEEN THE OIL TANK AND OIL PUMP. \\ | ||
+ | * **Oil cooler inlet and outlet**. | ||
+ | * On oil coolers without a built-in thermostat, either side can be an inlet or an outlet. Be sure you remember which you decide is the inlet/outlet. | ||
+ | * **Which first, oil cooler or oil filter**? | ||
+ | * Although the cooler must be in the oil flow return loop, it can be installed either before or after the oil filter. | ||
- | ===== Connections Using an Oil Cooler ===== | + | * **For 1957-1978 models**: |
- | See [[techtalk:ref:oil14|External Oil Coolers]] in the REF section of the Sportsterpedia (includes hose routing pics). \\ | + | * Below are drawings for adding an oil cooler inline WITH FACTORY OILING SYSTEMS that have the filter in the oil tank. |
- | **For 1957-1978 models**: \\ | + | **Simplified Oil Line Routing Drawings Using an Oil Cooler**: ((drawings by Hippysmack)) \\ |
+ | Click on a drawing to enlarge: \\ | ||
+ | Proper line routing is crucial. Mixing up the line connections can destroy your engine! \\ | ||
+ | |||
+ | {{:techtalk:ih:oil:simplified_oil_routing_with_oil_cooler_57-66_xlh_and_58-69_xlch_by_hippysmack.png?direct&300|}} {{:techtalk:ih:oil:simplified_oil_routing_with_oil_cooler_67-76_xlh_and_70-76_xlch_by_hippysmack.png?direct&300|}} {{:techtalk:ih:oil:simplified_oil_routing_with_oil_cooler_77-78_sportsters_by_hippysmack.png?direct&300|}} \\ | ||
+ | |||
+ | {{:techtalk:ih:oil:simplified_oil_routing_with_oil_cooler_79-82_sportster_by_hippysmack.png?direct&300|}} {{:techtalk:ih:oil:simplified_oil_routing_with_oil_cooler_83-e84_sportster_by_hippysmack.png?direct&300|}} {{:techtalk:ih:oil:simplified_oil_routing_with_oil_cooler_l84-85_sportster_by_hippysmack.png?direct&300|}} \\ | ||
+ | |||
+ | ===== Connections For Converting 57-78 Models to an Ext Oil Filter and Oil Cooler ===== | ||
+ | |||
+ | 1957-1978 XL/XLH models had an oil filter factory installed in the oil tank and 1958 XLC/XLCH models didn't have an oil filter factory installed. \\ | ||
+ | To use an external filter on XL/XLH models, the oil filter has to be removed from the tank and the plumbing for the oil filter and oil cooler are shown in the diagrams below. \\ | ||
+ | Any XLCH having an in-tank oil filter also needs that filter removed. \\ | ||
+ | |||
+ | |||
+ | **Simplified Oil Line Routing Drawings for Converting 1957-1978 models to an External Oil Filter**: ((drawings by Hippysmack)) \\ | ||
+ | Click on a drawing to enlarge: \\ | ||
+ | Proper line routing is crucial. Mixing up the line connections can destroy your engine! \\ | ||
+ | |||
+ | {{:techtalk:ih:oil:simplified_oil_routing_with_external_oil_filter_57-66_xlh_and_58-69_xlch_by_hippysmack.png?direct&300|}} {{:techtalk:ih:oil:simplified_oil_routing_with_external_oil_filter_67-76_xlh_70-76_xlch_by_hippysmack.png?direct&300|}} {{:techtalk:ih:oil:simplified_oil_routing_with_external_oil_filter_77-78_sportsters_by_hippysmack.png?direct&300|}} \\ | ||
+ | |||
+ | **Simplified Oil Line Routing Drawings for Converting 1957-1978 models to an External Oil Filter and an Oil Cooler**: ((drawings by Hippysmack)) \\ | ||
+ | Click on a drawing to enlarge: \\ | ||
- | Below are drawings for adding an oil cooler inline WITH FACTORY OILING SYSTEMS that have the filter in the oil tank. \\ | + | {{:techtalk:ih:oil:simplified_oil_routing_with_oil_filter_and_cooler_57-66_xlh_and_58-69_xlch_by_hippysmack.png?direct&300|}} {{:techtalk:ih:oil:simplified_oil_routing_with_oil_filter_and_cooler_67-76_xlh_70-76_xlch_by_hippysmack.png?direct&300|}} {{:techtalk:ih:oil:simplified_oil_routing_with_oil_filter_and_cooler_77-78_sportsters_by_hippysmack.png?direct&300|}} \\ |
- | The oil cooler is plumbed off the return side of the oil pump. \\ | + | |
- | CAUTION: DO NOT CONNECT THE OIL COOLER IN THE FEED PATH BETWEEN THE OIL TANK AND OIL PUMP. \\ | + | |
- | {{:techtalk:ih:oil:simplified_oil_routing_with_oil_cooler_57-66_xlh_and_58-69_xlch_by_hippysmack.png?direct&300|}} ((drawing by Hippysmack)) {{:techtalk:ih:oil:simplified_oil_routing_with_oil_cooler_67-76_xlh_and_70-76_xlch_by_hippysmack.png?direct&300|}} ((drawing by Hippysmack)) {{:techtalk:ih:oil:simplified_oil_routing_with_oil_cooler_77-78_sportsters_by_hippysmack.png?direct&300|}} ((drawing by Hippysmack)) \\ | ||
====== Oil Drains ====== | ====== Oil Drains ====== | ||
1957-1982 OEM oil tank models have a threaded plug screwed into the tank either on the bottom or on the side at the bottom. \\ | 1957-1982 OEM oil tank models have a threaded plug screwed into the tank either on the bottom or on the side at the bottom. \\ | ||
Line 244: | Line 279: | ||
1983-Up models tanks have no drain plug but rather a drain hose from the back side of the tank plugged under the battery tray (left side). \\ | 1983-Up models tanks have no drain plug but rather a drain hose from the back side of the tank plugged under the battery tray (left side). \\ | ||
It comes out from the tank, makes a 90 degree bend to the rear and fits into a cylindrical plug welded to the underside of the battery tray. \\ | It comes out from the tank, makes a 90 degree bend to the rear and fits into a cylindrical plug welded to the underside of the battery tray. \\ | ||
- | (on the rear part of the tray, near where the battery strap is fastened) ((John Harper of the XLFORUM http://xlforum.net/forums/showthread.php?t=1985862)) \\ | + | (on the rear part of the tray, near where the battery strap is fastened) ((John Harper of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/lubrication-and-lubricants/185512-oil-drain-hose?t=1985862)) \\ |
- | | 83-93 OEM oil drain location ((photo by RökkenRöll of the XLFORUM http://xlforum.net/forums/showthread.php?t=2069295)) | Oil drain with 82-93 retro oil tank ((photo by chris16371 of the XLFORUM http://xlforum.net/forums/showthread.php?t=1985862)) | | + | | 83-93 OEM oil drain location ((photo by RökkenRöll of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-suspension-frame-forks-handlebars-fuel-tank-oil-tank-fenders/193293-oil-drain?t=2069295)) | Oil drain with 82-93 retro oil tank ((photo by chris16371 of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/lubrication-and-lubricants/185512-oil-drain-hose?t=1985862)) | |
|{{:techtalk:evo:oil:1989_xlh_1200_engine_oil_drain_hose_by_rokkenroll.jpg?direct&300|}}|{{:techtalk:ih:oil:1982-1993_sportster_retrofit_oil_tank_kit_drain_hose_by_chris16371.jpg?direct&300|}}| | |{{:techtalk:evo:oil:1989_xlh_1200_engine_oil_drain_hose_by_rokkenroll.jpg?direct&300|}}|{{:techtalk:ih:oil:1982-1993_sportster_retrofit_oil_tank_kit_drain_hose_by_chris16371.jpg?direct&300|}}| | ||
====== Oil Lines to the Rockers ====== | ====== Oil Lines to the Rockers ====== | ||
Installation: \\ | Installation: \\ | ||
- | The ends are slightly different sizes. ((Ivan RoachCoach of the XLFORUM http://xlforum.net/forums/showthread.php?p=2505289#post2505289)) \\ | + | The ends are slightly different sizes. ((Ivan RoachCoach of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/92089-oil-pressure-issues/page2#post1917701)) \\ |
The larger-sized ends go on the case and the smaller-diameter ones go to the rockers. \\ | The larger-sized ends go on the case and the smaller-diameter ones go to the rockers. \\ | ||
In other words the closer they are to the oil pump, the bigger they should be. \\ | In other words the closer they are to the oil pump, the bigger they should be. \\ | ||
Line 260: | Line 295: | ||
If you have a leak here, you may not have to replace any parts. \\ | If you have a leak here, you may not have to replace any parts. \\ | ||
Try to uninstall them, clean, inspect and reinstall them and see what happens. \\ | Try to uninstall them, clean, inspect and reinstall them and see what happens. \\ | ||
- | Note for reinstalling the metal oil lines; ((IronMick of the XLFORUM http://xlforum.net/forums/showthread.php?t=1974660)) \\ | + | Note for reinstalling the metal oil lines; ((IronMick of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/183535-earl-leak?t=1974660)) \\ |
The line is just long enough to be inserted a small amount at each end at the fittings. \\ | The line is just long enough to be inserted a small amount at each end at the fittings. \\ | ||
So insert at the top, then the bottom ensuring that it is more or less even from top and bottom. \\ | So insert at the top, then the bottom ensuring that it is more or less even from top and bottom. \\ | ||
Line 271: | Line 306: | ||
Tighten them alternately, again keeping it from shifting. | Tighten them alternately, again keeping it from shifting. | ||
- | Keep an eye on which style you buy (if any need replaced). ((hcrashsterof the XLFORUM http://xlforum.net/forums/showthread.php?t=1974660)) \\ | + | Keep an eye on which style you buy (if any need replaced). ((hcrashsterof the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/183535-earl-leak?t=1974660)) \\ |
The OEM is barrel shaped. \\ | The OEM is barrel shaped. \\ | ||
Some aftermarkets are a barrel with 45° cuts on the top and bottom. \\ | Some aftermarkets are a barrel with 45° cuts on the top and bottom. \\ | ||
Line 277: | Line 312: | ||
Either a different polymer is used or you really need that full barrel shape to seal the oil line properly. | Either a different polymer is used or you really need that full barrel shape to seal the oil line properly. | ||
- | | Rocker oil line ((photo by Ironshred of the XLFORUM http://xlforum.net/forums/showthread.php?t=1974660)) | | + | | Rocker oil line ((photo by Ironshred of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/183535-earl-leak?t=1974660)) | |
|{{:techtalk:ih:oil:82_rocker_oil_lines_by_ironshred.jpg?direct&200|}}| | |{{:techtalk:ih:oil:82_rocker_oil_lines_by_ironshred.jpg?direct&200|}}| | ||
====== Braided Oil Lines ====== | ====== Braided Oil Lines ====== | ||
- | Braided lines can flex, leak, and sometimes flatten out. ((Ivan RoachCoach of the XLFORUM http://xlforum.net/forums/showthread.php?t=221093&highlight=split+rocker+box)) \\ | + | Braided lines can flex, leak, and sometimes flatten out. ((Ivan RoachCoach of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/51523-question-about-my-rocker-oil-lines?t=221093&highlight=split+rocker+box)) \\ |
- | Before you try threading any threads into your engine, try threading them on a pipe fitting first. ((MDT of the XLFORUM http://xlforum.net/forums/showthread.php?t=221093&highlight=split+rocker+box)) \\ | + | Before you try threading any threads into your engine, try threading them on a pipe fitting first. ((MDT of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/51523-question-about-my-rocker-oil-lines?t=221093&highlight=split+rocker+box)) \\ |
- | If the new parts are chromed then you should (must) wire wheel (with light pressure) the chromed threads before installation. ((IronMick of the XLFORUM http://xlforum.net/forums/showthread.php?t=221093&highlight=split+rocker+box)) \\ | + | If the new parts are chromed then you should (must) wire wheel (with light pressure) the chromed threads before installation. ((IronMick of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/51523-question-about-my-rocker-oil-lines?t=221093&highlight=split+rocker+box)) \\ |
This is especially important for chromed threaded bolts or bolts that have old Loctite on them. \\ | This is especially important for chromed threaded bolts or bolts that have old Loctite on them. \\ | ||
* Always wear a face mask as you can loose hold of the bolt (using a wire wheel on a bench grinder) it will go flying. \\ | * Always wear a face mask as you can loose hold of the bolt (using a wire wheel on a bench grinder) it will go flying. \\ | ||
Line 295: | Line 330: | ||
===== Copper, Brass and Stainless Tubing ===== | ===== Copper, Brass and Stainless Tubing ===== | ||
These were made with flared fittings and are a positive seat fitting. \\ | These were made with flared fittings and are a positive seat fitting. \\ | ||
- | They do not allow for any growth once the motor gets hot (if that's a concern). ((Monte03 of the XLFORUM http://xlforum.net/forums/showthread.php?t=1793589&page=2)) \\ | + | They do not allow for any growth once the motor gets hot (if that's a concern). ((Monte03 of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/166922-rocker-box-oil-lines/page2?t=1793589&page=2)) \\ |
The OEM style tubing uses slip compression type fittings which will allow expansion. \\ | The OEM style tubing uses slip compression type fittings which will allow expansion. \\ | ||
However, the flared fittings have been used on Sportsters. \\ | However, the flared fittings have been used on Sportsters. \\ | ||
Line 302: | Line 337: | ||
==== Copper ==== | ==== Copper ==== | ||
- | | Copper Oil Lines ((photo by Sadsack of the XLFORUM http://xlforum.net/forums/showthread.php?t=1793589)) | | + | | Copper Oil Lines ((photo by Sadsack of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/166922-rocker-box-oil-lines?t=1793589)) | |
|{{:techtalk:ih:oil:copper_oil_lines_by_sadsack.jpg?direct&200|}}| | |{{:techtalk:ih:oil:copper_oil_lines_by_sadsack.jpg?direct&200|}}| | ||
==== Brass ==== | ==== Brass ==== | ||
- | | Brass oil lines ((photos by Levi Luther of the XLFORUM http://xlforum.net/forums/showthread.php?t=1793589&page=2)) || Brass oil lines on a 62 model ((photo by 62 Ironhead of the XLFORUM http://xlforum.net/forums/blog.php?u=57274)) | | + | | Brass oil lines ((photos by Levi Luther of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/166922-rocker-box-oil-lines/page2?t=1793589&page=2)) || Brass oil lines on a 62 model ((photo by 62 Ironhead of the XLFORUM)) | |
|{{:techtalk:ih:oil:brass_oil_lines_1_by_levi_luther.jpg?direct&300|}}|{{:techtalk:ih:oil:brass_oil_lines_2_by_levi_luther.jpg?direct&300|}}|{{:techtalk:ih:oil:brass_oil_lines_by_62_ironhead.jpg?direct&300|}}| | |{{:techtalk:ih:oil:brass_oil_lines_1_by_levi_luther.jpg?direct&300|}}|{{:techtalk:ih:oil:brass_oil_lines_2_by_levi_luther.jpg?direct&300|}}|{{:techtalk:ih:oil:brass_oil_lines_by_62_ironhead.jpg?direct&300|}}| | ||
==== Stainless Steel ==== | ==== Stainless Steel ==== | ||
Stainless steel tubing will polish up like chrome and does not rust. \\ | Stainless steel tubing will polish up like chrome and does not rust. \\ | ||
- | You can also use Parker stainless steel fittings and 1/4" tubing. ((Bustert of the XLFORUM http://xlforum.net/forums/showthread.php?t=1793589&page=4)) ((http://xlforum.net/forums/showthread.php?t=1793589&page=5)) \\ | + | You can also use Parker stainless steel fittings and 1/4" tubing. ((Bustert of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/166922-rocker-box-oil-lines/page4?t=1793589&page=4)) ((https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/166922-rocker-box-oil-lines/page5?t=1793589&page=5)) \\ |
They will come with compression fittings, DO NOT USE!!!! \\ | They will come with compression fittings, DO NOT USE!!!! \\ | ||
Line 321: | Line 356: | ||
You can use O-rings here if you have them also. \\ | You can use O-rings here if you have them also. \\ | ||
- | | Stainless steel oil lines ((photo by Bustert of the XLFORUM http://xlforum.net/forums/showthread.php?t=1793589&page=4)) || | + | | Stainless steel oil lines ((photo by Bustert of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/166922-rocker-box-oil-lines/page4?t=1793589&page=4)) || |
|{{:techtalk:ih:oil:stainless_oil_lines_by_bustert.jpg?direct&200|}}|{{:techtalk:ih:oil:stainless_oil_lines_2_by_bustert.jpg?direct&300|}}| | |{{:techtalk:ih:oil:stainless_oil_lines_by_bustert.jpg?direct&200|}}|{{:techtalk:ih:oil:stainless_oil_lines_2_by_bustert.jpg?direct&300|}}| | ||