This is an old revision of the document!

REF: Body Parts - Sub-01T

Kickstand Mods

Kickstand riser:
This mod was devised after lowering the shocks on a standard 2000 XLH and having to lean the a long way to the right to put the jiffy stand down.
The OEM kickstand was replaced with a Hugger (advertised 1“ shorter than stock).
This aluminum round stock was cut down on a lathe as an extension.
Worked on concrete, asphalt, dirt and grass (did sink in slightly on the grass, but no problem).

A wedged nut on the bottom holds it to the Jiffy stand. 1)

Kickstand Extension:

This website uses cookies for visitor traffic analysis. By using the website, you agree with storing the cookies on your computer.More information