Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
techtalk:ref:body01t [2019/07/01 00:19]
hippysmack [Kickstand Mods]
techtalk:ref:body01t [2019/09/16 16:40] (current)
hippysmack [Kickstand Mods]
Line 2: Line 2:
 ====== REF: Body Parts - Sub-01T ====== ====== REF: Body Parts - Sub-01T ======
 ====== Kickstand Mods ====== ====== Kickstand Mods ======
-Kickstand riser: \\+====== ​Kickstand riser ====== 
 This mod was devised after lowering the shocks on a standard 2000 XLH and having to lean the a long way to the right to put the jiffy stand down. \\ This mod was devised after lowering the shocks on a standard 2000 XLH and having to lean the a long way to the right to put the jiffy stand down. \\
 The OEM kickstand was replaced with a Hugger (advertised 1" shorter than stock). \\ The OEM kickstand was replaced with a Hugger (advertised 1" shorter than stock). \\
Line 11: Line 12:
 |{{:​techtalk:​ref:​body:​jiffy_stand_riser_1_by_aussiegazza.jpg?​direct&​300|}}|{{:​techtalk:​ref:​body:​jiffy_stand_riser_2_by_aussiegazza.jpg?​direct&​300|}}|{{:​techtalk:​ref:​body:​jiffy_stand_riser_3_by_aussiegazza.jpg?​direct&​300|}}| |{{:​techtalk:​ref:​body:​jiffy_stand_riser_1_by_aussiegazza.jpg?​direct&​300|}}|{{:​techtalk:​ref:​body:​jiffy_stand_riser_2_by_aussiegazza.jpg?​direct&​300|}}|{{:​techtalk:​ref:​body:​jiffy_stand_riser_3_by_aussiegazza.jpg?​direct&​300|}}|
  
-Kickstand Extension: \\+====== ​Kickstand Extension ​======
 {{:​techtalk:​ref:​body:​kickstand_extension_toejam503.jpg?​direct&​300|}} ((photo by Toejam503 of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​p=5712103&​highlight=heel+toe#​post5712103)) \\ {{:​techtalk:​ref:​body:​kickstand_extension_toejam503.jpg?​direct&​300|}} ((photo by Toejam503 of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​p=5712103&​highlight=heel+toe#​post5712103)) \\
 +
 +----
 +
 +This one started out with a hole drilled into the end of the stand by the P.O. ((tigercreek of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=969794)) \\
 +When looking to modify the jiffy stand with the aftermarket kits they all say "​Except Hugger"​. \\
 +That's true IF you follow the directions. Here's what was done to take the original owner'​s mod a step further. \\
 +{{:​techtalk:​ref:​body:​kickstand_mod_1_by_tigercreek.jpg?​direct&​300|}} ((photo by tigercreek of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=969794)) \\
 +
 +The kits want you to drill near the shaft/foot of the Jiffy Stand. If you try to attach from there with a Hugger the stand will not completely retract. \\
 +However, if you drill/​attach through the foot, you can install it to retract and be completely out of the way. \\
 +There is no clearance issues and it sits in there pretty tight. \\
 +Without the original hole drilled, you could purchase the extender and tape it to several different spots to find the "​perfect"​ placement. \\
 +{{:​techtalk:​ref:​body:​kickstand_mod_2_by_tigercreek.jpg?​direct&​300|}} ((photo by tigercreek of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=969794)) {{:​techtalk:​ref:​body:​kickstand_mod_3_by_tigercreek.jpg?​direct&​300|}} ((photo by tigercreek of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=969794)) {{:​techtalk:​ref:​body:​kickstand_mod_4_by_tigercreek.jpg?​direct&​300|}} ((photo by tigercreek of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=969794)) \\
  
 \\ \\