REF: Body Parts

Aftermarket Fuel Tanks

Fuel Tank Parts and Mods

Petcock (Fuel Outlet)

When removing a factory vacuum operated petcock and swapping to a non-vacuum one, run a new (fresh) vacuum line from the carburetor to the Voes or Map Sensor (respective to year model) and discard the “tee” fitting. It will be cleaner to not use the “Y”. 1)

Golan Petcock

Golan brass petcock. With the nut screwed all the way down, it's
1-5/16“ from the top of the nut to the
bottom of the petcock. From the bottom of the nut it's 7/8”.2)
Golan petcock installed 3)

86-03 Tank Mount Mod

You can use slices of 5/16“ or 3/8” ID rubber oil or fuel line to create to insulate the fuel tank from the frame in absence of the stock rubber grommets.

4)


This website uses cookies for visitor traffic analysis. By using the website, you agree with storing the cookies on your computer.More information