Table of Contents
This is an old revision of the document!
REF: Body Parts
Foot Controls
Ironheads (57-85 models):
* . . . 1986 to 2003 forward controls modified to fit a 1980 frame
* . . . KraftTech Forwards w / Evo Shift Arm on a 1978 XLH
* . . . Gallery of Ironhead Forward Controls
Evos (86 and Up models):
* . . . Slaved Forwards with Mids
* . . . Biker's Choice Forwards (56129)
* . . . TC Bros Mids (102-0077) for 1991-2003 models
* . . . Gallery of Evo Forward Controls
* . . . Forward Controls to Rearset Conversion
* . . . Extended Forward Controls
Pedals / Foot Pegs / Shifter
* . . . Brake Pedal Mods
* . . . Shifter Mods
* . . . Higwway Bars, Engine Guards
* . . . Gallery of Foot Pegs / Shifters
Footboards / Floorboards
* . . . Homemade floorboards by beuz
* . . . Gallery of Floorboards
Linkage Related
* . . . Linkage Mods
* . . . 2009 HD XL 1200C Shift Lever Assembly Modification
Kickstand
* . . . Kickstand Mods
Kickstand Spring Alternative
http://xlforum.net/forums/showthread.php?t=1618492
Alternative Kickstand Spring (as identified by il67bp)
Everbilt 13/16“ x 4” Zinc-Plated Extension Spring (2-Pack)
Kickstand Bushings Alternative
In 1998 the kickstand bushings were added to all models - The other 1998 parts were still the same as previous model years: 50003-89A . PIN, CLEVIS 50005-85A . SPRING, JIFFY STAND 50006-89 . . JIFFY STAND but the bushings were added: 53176-08 . . BUSHING (2ea) The mounting holes in the kickstand tab at the frame were enlarged from that model year forward to accomodate the bushings. |
(See this discussion on the XLForum)
SpartanDen
Kickstand Bushing Dimensions
overall length. .250
inside dia. .375
outside dia. .500
flange. .685 dia
flange thk. .050
Grainger
P/N 12R786
P/N 12R657
These sizes are the same as the factory bushings, but are made of other material.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deimus
Kickstand Bushing Dimensions
Overall length: 5/16“
Inside diameter: 13/32” (just bigger than 3/8“)
Outside diameter: 1/2”
Flange diameter: 11/16“
Thickness of flange: 1/32” (yes the OEM is thin)
Bracket hole diameter: 1/2“ precisely
Jiffystand pin diameter: 3/8” precisely
Inside diameter of the worn bushing end: 15/32“ (very floppy on the pin)