Differences

This shows you the differences between two versions of the page.

--- techtalk:ref:engctl50 [2020/01/12 00:53]
ixl2relax [Table Data Files - '.tbl']
+++ techtalk:ref:engctl50 [2021/04/25 05:31]
ixl2relax ↷ Links adapted because of a move operation
@@ Line 106: / Line 106: @@
 ==== Module Parameters ====
-{{ :techtalk:ref:engctl:tc88a-pc-link-options-box.jpg?300|}}
+{{ techtalk:ref:engctl:tc88a-pc-link-options-parametersbox.jpg?300|}}
 The module parameters (which are saved in the map TBL file) can be altered in the PC-Link software under OPTIONS. Be sure to carefully set these parameters BEFORE UPLOADING your customized map to the module and before saving your map for future use. AFTER the TBL information is uploaded to the module, these settings will be effective on the module.
@@ Line 151: / Line 151: @@
 **TachEnableFlag:**\\
-If the Enable Tach Output box is checked, the TachEnableFlag will be SET TRUE. This setting will generate a 12v square wave on pin2 matching the RPM of the engine. This signal will be usable by most discrete signal tachometers (like those that connect off of the ignition coil). If this setting is utilized, the Real-time Data Display in the TC88A logging software will not function.
+If the Enable Tach Output box is checked, the TachEnableFlag will be SET TRUE. This setting will generate a 12v square wave on pin2 matching the RPM of the engine. This signal will be usable by most discrete signal tachometers (like those that connect off of the ignition coil). The output signal is one pulse per revolution. If this setting is utilized, the Real-time Data Display in the TC88A logging software will not function.
 If the Enable Tach Output box is unchecked, the TachEnableFlag will be SET FALSE.