Differences

This shows you the differences between two versions of the page.

--- techtalk:ref:oil13 [2019/11/14 15:34]
hippysmack [Modifying a standard motor mount for use as a oil filter mount]
+++ techtalk:ref:oil13 [2021/02/22 04:26]
hippysmack [Remote Oil Filters]
@@ Line 2: / Line 2: @@
 ====== REF: Oiling & Lubrication ======
 ====== Remote Oil Filters ======
+The stock oil filter (HD 63782-80T) is the small one that is usually used on custom bikes. Chrome or black can be found. ((IronMick of the XLFORUM http://xlforum.net/forums/showthread.php?t=563241)) \\
+However, it is also commonly known that the more oil you hold, the more motor heat can be transferred to dissipate that heat. \\
+Race bikes have huge oil tanks for that reason. ((Monte03 of the XLFORUM http://xlforum.net/forums/showthread.php?t=563241)) \\
+If you go the filter route, be sure to purge the lines by bleeding the pump front nipple first while running. \\
+Then take the return line and place it into a pail before you connect to the barb tank fitting so you assure a complete circle has been made.
+====== Plumbing to Oil Filter ======
+**Note**: On all spin on oil filters, dirty oil goes in the outside of the filter. Clean oil comes out the center. (( ryder rick of the XLFORUM http://xlforum.net/forums/showthread.php?p=5643382&highlight=oil+filter+bracket#post5643382)) \\
+If you are not sure, start the motor momentarily with the filter off and if oil is pumped out the center port, you have it backwards. \\
+|  74 XLH Oil Filter Plumbing ((photo by vyper202 of the XLFORUM http://xlforum.net/forums/showthread.php?t=1570042))  |
+|{{:techtalk:ih:oil:74_oil_line_routing_4_by_vyper202.jpg?direct&300|}}|
 Below is a parts list for a remote oil filter setup although it's not a kit per say; ((HolyHandGrenade of the XLFORUM http://xlforum.net/forums/showthread.php?t=1189337)) \\
 Derale spin-on bypass adapter with dual 1/2" NPT ports. ((https://www.jegs.com/i/Derale/259/15703/10002/-1)) \\
@@ Line 51: / Line 67: @@
 They are piped off the return hose to the tank. \\
-|  Motor mount oil filter adapter. ((photos by Gone of the XLFORUM http://xlforum.net/forums/showthread.php?p=2462458))  ||  Installed position ((photo by RDiesel of the XLFORUM http://xlforum.net/forums/showthread.php?t=2004928&highlight=oil+filter+mount&page=2))  |
+|  Motor mount / Oil filter adapter. ((photos by Gone of the XLFORUM http://xlforum.net/forums/showthread.php?p=2462458))  ||  Installed position ((photo by RDiesel of the XLFORUM http://xlforum.net/forums/showthread.php?t=2004928&highlight=oil+filter+mount&page=2))  |
 |{{:techtalk:ref:oil:motor_mount_filter_adapter_1_by_gone.jpg?direct&150|}}|{{:techtalk:ref:oil:motor_mount_filter_adapter_2_by_gone.jpg?direct&150|}}|{{:techtalk:ref:oil:motor_mount_filter_adapter_2_by_rdiesel.jpg?direct&300|}}|
@@ Line 75: / Line 91: @@
 |  Standard motor mount mod for addition of an oil filter ((photos by bustert of the XLFORUM http://xlforum.net/forums/showthread.php?t=1266793))  ||  Marking the center hole for the filter ((drawing by Hippysmack))  |
-|{{:techtalk:ref:oil:ih_oil_filter_mount_1_by_bustert.jpg?direct&300|}}|{{:techtalk:ref:oil:ih_oil_filter_mount_2_by_bustert.jpg?direct&300|}}|{{:techtalk:ref:oil:1finding_center_of_a_circle_by_hippysmack.jpg?direct&300|}}|
+|{{:techtalk:ref:oil:ih_oil_filter_mount_1_by_bustert.jpg?direct&300|}}|{{:techtalk:ref:oil:ih_oil_filter_mount_2_by_bustert.jpg?direct&300|}}|{{:techtalk:ref:oil:finding_center_of_a_circle_by_hippysmack.jpg?direct&300|}}|

Trace:

Differences

Navigation

Search

Toolbox