Differences

This shows you the differences between two versions of the page.

--- techtalk:ref:oil18 [2022/10/14 04:37]
hippysmack [Pro-Flow]
+++ techtalk:ref:oil18 [2024/01/19 03:40] (current)
hippysmack
@@ Line 3: / Line 3: @@
 \\
 ====== Aftermarket Sportster Oil Pumps ======
-====== Pro-Flow ======
+====== Pro-Flow for 1977-Present Sportsters ======
-The Pro Flow oil pump for 1991-up Sportsters was developed by Zippers according to Buz Buzzellie's Sportster Performance Handbook. ((88inchsporty of the XLFORUM http://xlforum.net/forums/showthread.php?t=454717)) \\
+The Pro Flow oil pump for 1991-up Sportsters was developed by Zippers according to Buz Buzzellie's Sportster Performance Handbook. ((88inchsporty of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/lubrication-and-lubricants/68354-rebuilding-a-pro-flow-oil-pump?t=454717)) \\
+Billed as compact Cad/Cam design, made of 6061 aluminum, O-ring sealing throughout and modular construction. \\
 The ProFlow oil pumps and accessories for XLs, BTs and TCs in the year 2000 at least were sold thru Zippers Performance as well as Zodiac International B.V. (The Netherlands)\\
-These pumps are no longer in production. ((Jorgen of the XLFORUM http://xlforum.net/forums/showthread.php?p=4368299&highlight=pro+flow#post4368299)) There were two versions for Sportsters; a 3 stage and a 4 stage. \\
+These pumps are no longer in production. ((Jorgen of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/lubrication-and-lubricants/148571-oil-change-fail/page3?highlight=pro+flow#post3177632)) There were two versions for Sportsters; a 3 stage and a 4 stage. \\
-In 2000, the pump was redesigned with improvements, one of which was the addition of an oil strainer cap / cover over the cam chest port. ((2000 Zippers Catalog information provided by jacha6090)) \\
+In 2000, the pump was redesigned with improvements, one of which was the addition of an oil strainer cap / cover over the cam chest port. ((Thanks goes to Ebay seller, jacha6090 for the 2000 Zippers Catalog information)) \\
 The drive gear and gerotor systems were improved for less drag while maintaining reportedly superior scavenge and feed rates. \\
@@ Line 30: / Line 31: @@
 Click on a pic to enlarge: \\
-|  Pro Flow 3 stage oil pump. ((photos by Jorgen of the XLFORUM http://xlforum.net/forums/showthread.php?p=4368299&highlight=pro+flow#post4368299))  ||
+|  Pro Flow 3 stage oil pump. ((photos by Jorgen of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/lubrication-and-lubricants/148571-oil-change-fail/page3?highlight=pro+flow#post3177632))  ||
 |{{:techtalk:ref:oil:proflow_oil_pump_1_by_jorgen.jpg?direct&300|}}|{{:techtalk:ref:oil:proflow_oil_pump_2_by_jorgen.jpg?direct&300|}}|
@@ Line 65: / Line 66: @@
 ^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&800|}}|||
-|  REPLACEMENT PARTS FOR PRO-FLOW SPORTSTER TYPE OIL PUMPS ((parts list provided by Jörgen of the XLFORUM http://xlforum.net/forums/showthread.php?t=454717))  |||
+|  REPLACEMENT PARTS FOR PRO-FLOW SPORTSTER TYPE OIL PUMPS ((parts list provided by Jörgen of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/lubrication-and-lubricants/68354-rebuilding-a-pro-flow-oil-pump?t=454717))  |||
 |**These are Zodiac NL part numbers**  |||
-|721756|Rebuild kit|For Sportster type Pro-Flow pumps. \\ Contains all clips, keys, pins and O-rings needed for complete \\ reassembly of the Pro-Flow Sportster style oil pump.|
+|721756|Rebuild kit|For Sportster type Pro-Flow 3 & 4 stage pumps. \\ Contains all clips, keys, pins and O-rings needed for complete \\ reassembly of the Pro-Flow Sportster style oil pump.|
-|721845|Pro-Flow Main body|With gerotor set.|
+|721845|Pro-Flow main body|With gerotor set.|
-|721846|Pro-Flow Scavenge section|With spur gears.|
+|721846|Pro-Flow scavenge section|With spur gears.|
-|721847|Pro-Flow Feed section|With gerotor set for ZPN 721184|
+|721847|Pro-Flow feed section|With gerotor set for ZPN 721184|
-|721848|Pro-Flow Feed section|With gerotor set for ZPN 721183|
+|721848|Pro-Flow feed section|With gerotor set for ZPN 721183|
 |721849|Auxiliary section|With gerotor set for ZPN 721184|
-|721850|Pro-Flow Oil pump cover|
+|721850|Pro-Flow oil pump cover|
-|721851|Pro-Flow Drive shaft|Only for ZPN 721183|
+|721851|Pro-Flow drive shaft|Only for ZPN 721183|
-|721852|Pro-Flow Drive shaft|Only for ZPN 721184|
+|721852|Pro-Flow drive shaft|Only for ZPN 721184|
 |722121|Dowel pins|For oil pump set ZPN 721183 and ZPN 721184|
 |722069|Mounting bolts|For ZPN 721183|
 |722139|Mounting bolts|For ZPN 721184|
 |**These are Zippers Performance part numbers**  |||
+|613-140|Pro Flow 3 Stage XL oil pump|Comes with street oil strainer cap (filter)|
+|613-150|Pro Flow 4 stage XL oil pump|Comes without oil strainer cap (filter)|
+|613-103|Fitting kit|For 1986-1990 XL cases and all S&S cases|
+|613-104|Fitting kit w/ check valve|For 1977-1985 XL cases and and Delkrom 4 cam cases|
+|613-141|Rebuild kit|For Sportster type Pro-Flow 3 & 4 stage pumps. \\ Contains all clips, keys, pins and O-rings needed for complete \\ reassembly of the Pro-Flow Sportster style oil pump. \\ Also contains "street" filter for standard oil level.|
+|613-145|"Street" filter|Oil strainer for standard oil level|
+|613-145|"Race" filter|Oil strainer w/ low oil holes to reduce oil in gearcase|
+|613-146|"Blank" filter|Oil strainer w/ no holes for custom build|
+|613-143|Filter set|Oil strainer set w/ street, race and blank strainer caps|
+|613-142|Silver / bronze drive gear|Oil pump shaft gear upgrade for extreme load applications|
+====== Drag Specialties ======
+===== Oil Pump Assembly (09320189) for 1991-2020 Sportsters =====
+This oil pump is comparable to the 2007-up Sportster oil pump (26204-91A) with the taller scavenge gerotors. \\
+However, **the parts in this pump will not interchange with the factory oil pump**. The gerotor and middle spacer dims are different. \\
+[[http://www.sportsterpedia.com/doku.php/techtalk:evo:oil03g|Click Here]] to view parts dims for the factory 07-up oil pump. \\
+* Noticeable markings: \\
+… Cover has CL stamped into the bottom center. \\
+… Cover reads RPLS 26204-91A \\
+  * Features
+    * Cast aluminum body with steel gears and shaft
+    * Raw cast aluminum finish
+    * Gaskets and seals included
+    * (2) mounting bolts and hose clamps (sold separately)
+    * (2) 1/8"-27 x 3/8" hose bibb fittings (for feed inlet and return hose attachments) (sold separately)
+    * (1) 1/8"-27 x AN5 feed hose fitting (sold separately)
+Notes: \\
+Parts Europe lists the flow rate as "standard" ((https://www.partseurope.eu/en/product/oil-pump-assembly/09320189?s=88164)) \\
+==== Pics of parts ====
+|  Cover ID ((photos by Sportyheizer of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-motor-engine/sportster-motorcycle-bottom-end/205147-oil-pump-replacement/page2#post4632387))  |  Pump body (minus cover) ((photo by Sportyheizer of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-motor-engine/sportster-motorcycle-bottom-end/205147-oil-pump-replacement/page2#post4632387))  |  Spacer between the gerotors ((photos by Sportyheizer of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-motor-engine/sportster-motorcycle-bottom-end/205147-oil-pump-replacement/page2#post4632387))  |
+|{{:techtalk:ref:oil:drag_specialties_oil_pump_09320189_parts_pic12_by_sportyheizer.jpg?direct&300|}}|{{:techtalk:ref:oil:drag_specialties_oil_pump_09320189_parts_pic1_by_sportyheizer.jpg?direct&300|}}|{{:techtalk:ref:oil:drag_specialties_oil_pump_09320189_parts_pic5_by_sportyheizer.jpg?direct&300|}}|
+|  Spacer between the gerotors ((photos by Sportyheizer of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-motor-engine/sportster-motorcycle-bottom-end/205147-oil-pump-replacement/page2#post4632387))  |  Feed gerotor OD and height ((photos by Sportyheizer of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-motor-engine/sportster-motorcycle-bottom-end/205147-oil-pump-replacement/page2#post4632387))  ||
+|{{:techtalk:ref:oil:drag_specialties_oil_pump_09320189_parts_pic6_by_sportyheizer.jpg?direct&300|}}|{{:techtalk:ref:oil:drag_specialties_oil_pump_09320189_parts_pic2_by_sportyheizer.jpg?direct&300|}}|{{:techtalk:ref:oil:drag_specialties_oil_pump_09320189_parts_pic4_by_sportyheizer.jpg?direct&300|}} |
+|  Feed gerotor dim ((photos by Sportyheizer of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-motor-engine/sportster-motorcycle-bottom-end/205147-oil-pump-replacement/page2#post4632387))  |  Scavenge gerotor OD and height ((photos by Sportyheizer of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-motor-engine/sportster-motorcycle-bottom-end/205147-oil-pump-replacement/page2#post4632387))  ||
+|{{:techtalk:ref:oil:drag_specialties_oil_pump_09320189_parts_pic3_by_sportyheizer.jpg?direct&300|}}|{{:techtalk:ref:oil:drag_specialties_oil_pump_09320189_parts_pic7_by_sportyheizer.jpg?direct&300|}}|{{:techtalk:ref:oil:drag_specialties_oil_pump_09320189_parts_pic8_by_sportyheizer.jpg?direct&300|}}|
+|  Scavenge gerotor dims ((photos by Sportyheizer of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-motor-engine/sportster-motorcycle-bottom-end/205147-oil-pump-replacement/page2#post4632387))  |||
+|{{:techtalk:ref:oil:drag_specialties_oil_pump_09320189_parts_pic9_by_sportyheizer.jpg?direct&300|}}|{{:techtalk:ref:oil:drag_specialties_oil_pump_09320189_parts_pic10_by_sportyheizer.jpg?direct&300|}}|{{:techtalk:ref:oil:drag_specialties_oil_pump_09320189_parts_pic11_by_sportyheizer.jpg?direct&300|}}|
 \\

Trace:

Differences

Navigation

Search

Toolbox