Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
|
techtalk:ref:oil22 [2022/07/12 01:51] hippysmack [1998-2006 Oil Pump Flow Test] |
techtalk:ref:oil22 [2022/07/12 02:22] hippysmack [2007-Present Oil Pump Flow Test] |
||
|---|---|---|---|
| Line 518: | Line 518: | ||
| === Feed Testing === | === Feed Testing === | ||
| **Actual Pump Feed Flow Test**: \\ | **Actual Pump Feed Flow Test**: \\ | ||
| + | The video below shows about 30 ounces per minute into the container at 654.7 RPM. \\ | ||
| + | |||
| + | | Video: 2007-Present Feed Volume at 654.7 RPM ((video by Hippysmack)) | | ||
| + | |{{:video:oil_pump_flow_testing_video-_2007-present_feed-test_at_654.7_rpm_by_hippysmack.mp4|}}| | ||
| + | |||
| + | === Return Testing === | ||
| + | **Actual Pump Return Flow Test**: \\ | ||
| + | Flow testing was attempted to measure volume of the sump inlet port (cam port open to atmosphere) and cam inlet port (sump port open to atmosphere). \\ | ||
| + | * The cam port volume could not be tested due to not enough oil being delivered to it. \\ First, the container of oil for the cam chest inlet was hung above the drill press where the inlet hose was 25-1/2" above the pump (oil level 28" above pump). \\ The oil pump had more suction than the weight of gravity oil (more suction than gravity could deliver oil for). \\ Next, the container was raised to where the inlet fitting was 34-1/2" above the pump with the oil level at 39" above. \\ The oil pump was still sucking faster than the oil was being delivered to the top of the pump. | ||
| + | * The sump port alone delivered about 63 ounces per minute into the container at 654.7 RPM. | ||
| + | |||
| + | | Video: 2007-Present Cam Chest Inlet Test- \\ (not enough oil delivery for testing) ((video by Hippysmack)) | Video: 2007-Present Sump Inlet Test ((video by Hippysmack)) | | ||
| + | |{{:video:oil_pump_flow_testing_video-_2007-present_return-_cam_chest_inlet_at_654.7_rpm_by_hippysmack.mp4|}}|{{:video:oil_pump_flow_testing_video-_2007-present_return-_sump_inlet_at_654.7_rpm_by_hippysmack.mp4|}}| | ||
| ===== Further Testing Attempted ===== | ===== Further Testing Attempted ===== | ||
| ==== Feed Pressure Testing ==== | ==== Feed Pressure Testing ==== | ||
