Differences

This shows you the differences between two versions of the page.

--- techtalk:ref:priclutch02 [2019/11/14 02:40]
ixl2relax
+++ techtalk:ref:priclutch02 [2019/11/14 02:44]
ixl2relax ['91-later Alternative Clutch Pack Using XR1200 Parts]
@@ Line 155: / Line 155: @@
 -90 Steel Clutch Plate\\
+\\
+\\
+====== Upgrade Clutch Release Bearing - HD P/N 8885 to 7200B Angular Ball Bearing ======
+You might consider replacing the stock bearing, P/N 8885, which is a standard ball type bearing (equiv. to 6200). Using an angular contact bearing, which provides additional support in the axial direction, is a better alternative for this application. The upgraded replacement would be 7200B (not supplied by HD) and is an angular contact bearing. Thus, it is important to orient the bearing in the right direction when pressing the bearing into the Release Plate.
+The wide side of the 7200B outer bearing race should be placed into the release plate first. This also means that the narrow part of the inner bearing race is first into the plate.
+When correctly assembled, the narrow part of the outer race and the wide part of the inner race will each be exposed on the insertion side of the release plate. The Adjustment Screw is inserted into that wide side of the inner race, as shown below.
+{{:techtalk:evo:priclutch:clutchreleasebearing-compare8885-7200b.jpg?400|}}  {{:techtalk:evo:priclutch:clutchreleasebearing-destroyed8885.jpg?400|}}((Pics by goblin_dust at this thread: http://xlforum.net/forums/showthread.php?t=1987885 - Annotated by IXL2Relax at the XLForum))
+{{:techtalk:evo:priclutch:clutchreleasebearing-7200b-angular.jpg?400|}}((Thanks to Reddtigger - xlforum.net/forums/showthread.php?t=1688139))  {{:techtalk:evo:priclutch:clutchreleasebearing-7200b-angular-bolt.jpg?400|}}((Annotated by IXL2Relax at the XLForum))
+Additional discussion:
+http://xlforum.net/forums/showthread.php?t=1688139
+\\

Trace:

Differences

Navigation

Search

Toolbox