Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
techtalk:ref:priclutch03 [2019/11/13 00:28]
ixl2relax [Energy One]
techtalk:ref:priclutch03 [2019/11/13 00:30]
ixl2relax [Energy One]
Line 23: Line 23:
 |{{:​techtalk:​ref:​priclutch:​energy_one_clutch_pack_by_sarahcolt.jpg?​direct&​300|}}|{{:​techtalk:​ref:​tools:​soaking_new_cluch_plates_by_chris_b_owens.jpg?​direct&​300|}}| |{{:​techtalk:​ref:​priclutch:​energy_one_clutch_pack_by_sarahcolt.jpg?​direct&​300|}}|{{:​techtalk:​ref:​tools:​soaking_new_cluch_plates_by_chris_b_owens.jpg?​direct&​300|}}|
  
 +
 +
 +\\
 +
 +
 +===== Screamin'​ Eagle® Performance Clutch Kit =====
 +
 +HD has a Performance Clutch Kit (Number 38002-04) designed to fit 1991 and later XL and 1994 to 1997 1340 Evolution® model motorcycles.(( shanneba from the XLFORUM)) ​  This kit is still being sold by HD as of 12-22-2016.
 +
 +  * The nine high performance friction discs and eight spacer discs in this kit replace the original eight paper friction discs and six spacer discs. This kit also replaces the spring plate and diaphragm spring with a higher rate diaphragm spring.(( https://​serviceinfo.harley-davidson.com/​sip/​service/​document/​2295))
 +  * Cautions: Do not reinstall the OE spring plate and diaphragm spring with this kit. Doing so will affect the stacked height of the clutch discs. The spacer discs supplied in this kit must be used with the high performance friction discs. Do not use the original equipment (OE) spacer discs with this kit. Doing so will affect the stacked height of the clutch discs, resulting in clutch slippage.
 +  * Installation,​ refer to the applicable Harley-Davidson Service Manual for installation of friction discs, spacer discs, and diaphragm spring in kit, but follow these important guidelines:
 +      * Remove the original eight friction discs, six spacer discs, spring plate, and diaphragm spring from the clutch assembly as described in the Service Manual, and discard.
 +      * Replace with nine high performance friction discs, eight spacer discs, and diaphragm spring from kit. Place a friction disc into the clutch shell first, then alternate spacer discs and friction discs.
 +      * Kit includes:
 +        * Disc set including 9 friction and 8 spacer discs. Part #(38001-04)
 +        * 1 Spring, clutch diaphragm Part #​(37949-98A)