Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
techtalk:ref:svcproc22 [2019/01/30 20:20]
hippysmack [Find Compression Using a TDC Whistle]
techtalk:ref:svcproc22 [2020/01/14 00:43] (current)
ixl2relax ↷ Links adapted because of a move operation
Line 214: Line 214:
   * You can use the TDC mark etched into your flywheel on 2003 and prior stock engines to find TDC.   * You can use the TDC mark etched into your flywheel on 2003 and prior stock engines to find TDC.
   * The marks should be accurate enough on these engines although [[techtalk:​ref:​svcproc22#​finding_true_tdc|True TDC]] can be checked if need be.   * The marks should be accurate enough on these engines although [[techtalk:​ref:​svcproc22#​finding_true_tdc|True TDC]] can be checked if need be.
-    * [[techtalk:​ih:​engctl01f|Click here for stock 57-85 TDC symbol identification]].+    * [[techtalk:​ih:​engctl01#​timing_marks|Click here for stock 57-85 TDC symbol identification]].
     * [[techtalk:​evo:​engctl01#​ignition_timing_-_all_models_thru_2003|Click here for stock 86-03 TDC symbol identification]]. ​     * [[techtalk:​evo:​engctl01#​ignition_timing_-_all_models_thru_2003|Click here for stock 86-03 TDC symbol identification]]. ​
-  * If you've upgraded to a 2004 or later flywheel assembly, (on 03 and prior engines) you'll have to [[techtalk:​ref:​engmech01c|make your own TDC mark]] on these if you need one. \\ (this procedure can also be used to create the advance timing mark) +  * If you've upgraded to a 2004 or later flywheel assembly, (on 03 and prior engines) you'll have to [[techtalk:​ref:​engmech01l|make your own TDC mark]] on these if you need one. \\ (this procedure can also be used to create the advance timing mark) 
  
  
Line 454: Line 454:
  
 **Front Cylinder**: **Front Cylinder**:
-|  **Timing Cup** position at TDC on compression stroke. \\ Slot is up to the left. ((photo by Hippysmack)) ​ |  **Timing cup** position at TDC on exhaust stroke. \\ Slot is down to the right. ((photo by Hippysmack)) ​ |+|  **Timing Cup** position at TDC on compression stroke. \\ Cup mounting notch (near bolt) is up to the left. ((photo by Hippysmack)) ​ |  **Timing cup** position at TDC on exhaust stroke. \\ Cup mounting notch (near bolt) is down to the right. ((photo by Hippysmack)) ​ |
 |{{techtalk:​ref:​svcproc:​timing_cup_position_on_tdc_compression_stroke_1_by_hippysmack.jpg?​direct&​300|}}|{{techtalk:​ref:​svcproc:​timing_cup_position_on_tdc_exhaust_stroke_1_by_hippysmack.jpg?​direct&​300|}}| |{{techtalk:​ref:​svcproc:​timing_cup_position_on_tdc_compression_stroke_1_by_hippysmack.jpg?​direct&​300|}}|{{techtalk:​ref:​svcproc:​timing_cup_position_on_tdc_exhaust_stroke_1_by_hippysmack.jpg?​direct&​300|}}|