Table of Contents
This is an old revision of the document!
REF: Shop Notes, Tips, and Tools - Sub-03D
Wrist Pin Removal - Installation Tools
![]() | ![]() | ![]() |
Home made wrist pin removal / installation tool. 5/16“ all thread, 2 fender washers, two nuts, two PVC spacers and two 1/2” sockets. 1) |
![]() |
The socket should be slightly smaller than the OD of the wrist pin. This can be used to remove and install the wrist pin. 2) |
![]() |
Another one made from a 3/4 inch bolt with two washers and a nut. 3) |
Rocker Box Tools
1)
, 2)
pics courtesy of humancertainty of the XLFORUM http://xlforum.net/forums/showthread.php?t=1952102&highlight=wrist+pin+removal+tool
3)
photo by arisaka of the XLFORUM http://xlforum.net/forums/showthread.php?t=395586&page=16
4)
photos by Hippysmack