Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision | Next revision Both sides next revision | ||
techtalk:ref:tools124 [2021/11/12 23:00] hippysmack [Evo Engine] |
techtalk:ref:tools124 [2021/11/12 23:18] hippysmack [Ironhead Engine] |
||
---|---|---|---|
Line 4: | Line 4: | ||
====== Ironhead Engine ====== | ====== Ironhead Engine ====== | ||
- | * Keep the extender straight out in front of the wrench. Don't let it move out of line more than a ratchet click or two, otherwise it can affect the torque reading. ((Hopper of the XLFORUM http://xlforum.net/forums/showthread.php?t=395586&page=2)) \\ [[techtalk:ref:tools123#torque_socket_wrench_extensions_horizontal_with_the_wrench|Read more about torque value changes with the use of extensions here]]. | + | * Keep the extender straight out in front of the wrench. \\ Don't let it move out of line more than a ratchet click or two, otherwise it can affect the torque reading. ((Hopper of the XLFORUM http://xlforum.net/forums/showthread.php?t=395586&page=2)) |
+ | * If the extension is not used at a 90° angle from the wrench (as in the pics below), you'll need to recalculate torque before using. \\ [[techtalk:ref:tools123#torque_socket_wrench_extensions_horizontal_with_the_wrench|Read more about torque value changes with the use of extensions here]]. | ||
|Torque rocker box bolts to 20 ft lbs. You can use a wrench cut down to 3 inches long and welded to a 3/8 drive socket to get in under the frame and torque those \\ rocker bolts to show 185 inch pounds on a 10 inch torque wrench, to give 240 at the bolt.||| | |Torque rocker box bolts to 20 ft lbs. You can use a wrench cut down to 3 inches long and welded to a 3/8 drive socket to get in under the frame and torque those \\ rocker bolts to show 185 inch pounds on a 10 inch torque wrench, to give 240 at the bolt.||| |