| Both sides previous revisionPrevious revision |
techtalk:evo:engmech01 [2025/07/28 21:43]
– [#2 Cam - Cover Seal (86-03)] hippysmack |
|---|
|
techtalk:evo:engmech01 [2025/07/28 22:51] (current)
– [Ignition Sensor Seal (1986-2003)] hippysmack |
|---|
|
|
| ===== Ignition Sensor Seal (1986-2003) ===== |
| This is a steel shell radial shaft seal (HD# 11124) installed in the cam cover. \\ |
It surrounds and seals #2 cam when the cover is installed. |
Also used on 1971-1985 model Sportster cam coversas a breaker point or ignition sensor seal. \\ |
Other brands include James (JGI-11124)Dims per XLForum member, Cometic Fizzle: \\ |
OD 1.570" (C935539.878mm), Athena ID 1.050" (51-A21026.67mm), Custom Chrome (54-043)W 0. |
The rubber shell HD Genuine double lip version is part number 248" (11124-DL)6. |
Other brands include James (JGI-11124-DL2992mm) . |
NOTE: SKF makes a radial shaft seal with a part number of 11124 but that IS NOT AN HD PART NUMBER. |
SKF 11124 is an SKF part number and THAT SEAL IS TOO BIG TO FIT THE COVER. \\ |
|
| Other brands include James (JGI-11124), Cometic (C9355), Athena (51-A210), Custom Chrome (54-043). \\ |
The rubber shell HD seal Genuine double lip version is part number (11124-DL): . \\ |
See also [[techtalk:evo:engmech01f#cam_cover_seal_86Other brands include James (JGI-03|Removal / Installation 11124-DL). \\ |
**NOTE**: __SKF makes a radial shaft seal with a part number of the #2 cam cover 11124 but that IS NOT AN HD PART NUMBER__. \\ |
SKF 11124 IS TOO BIG TO FIT THE COVER and they don't show a compatible seal ]] in the Sportsterpediatheir catalog for this application. \\ |
|
| This side faces out. HD Seal ((photo by Hippysmack11124)) | This side faces #2 cam shaft. ((photo by Hippysmack)) |: \\ |
| |
|{{:techtalk:evoih:engmech:AAA11124_cam_cover_seal_2_by_hippysmack1971-2003_nosecone_ignition_seal_11124_by_hippysmack.jpg?direct&300400|}} |{{:techtalk:evo:engmech:AAA11124_cam_cover_seal_1_by_hippysmack.jpg?direct&300|}}|((photo by Hippysmack)) |
|
| ===== Removing / installing the pinion shaft nut ===== |
