Table of Contents
This is an old revision of the document!
EVO: Suspension
Front Fork Info
Sub-Documents
* . . . Future Subject
* . . . 2014 XL1200T Front Fork Testing w/ Spring Rate Charts
* . . . 1994 XLH Front Forks Disassembled - Measurements w/Pictures
* . . . 1200S Fork Rebuild & Hyperpro Spring Fitment
* . . . 1200S Suspension: Settings
* . . . Future Subject
1986-2003 Forks (Except 1200S)
Abbreviations:
- Std = 883 Standard Model & 1200 Standard Model
- Dlx = 883 Deluxe Model
- Hug = 883 Hugger Model
- Ctm = 883 Custom Model & 1200 Custom Model
Slider Tube, Damper Tube & Spring
1986 Late | Std & Dlx | ||
---|---|---|---|
-1987 | 35mm Tubes | Std & Dlx & Hug | Length |
Slider Tube | 45407-86 | 23.25 | |
Damper Tube | 45913-84 | ||
Spring-#Coils | 45907-83 | 20.25 | |
1988-1991 | 39mm Tubes | Std & Dlx & Hug | Length |
Slider Tube | 45381-87 | 23.375 | |
Damper Tube | 45925-88 | 10.875 | |
Spring-#Coils | 45376-87 | 20.25 |
1992 | Models » | Std&Dlx | Length | Hugger | Length |
---|---|---|---|---|---|
Slider Tube | 45381-87 | 23.375 | 45395-92 | 24.25 | |
Damper Tube | 45925-88 | 10.875 | 45938-92 | 7.5 | |
Spring-#Coils | 45376-87 | 20.25 | 45372-92 | 21.5_47c | |
1993 | |||||
Slider Tube | 45381-87 | 23.375 | 45395-92 | 24.25 | |
Mid-year | Slider Tube | 45395-92 | 24.25 | ● | ● |
Damper Tube | 45925-88 | 10.875 | 45938-92 | 7.5 | |
Spring-#Coils | 45376-87 | 20.25 | 45372-92 | 21.5_47c | |
1994-1995 | |||||
Slider Tube | 45395-92 | 24.25 | 45395-92 | 24.25 | |
Damper Tube | 45925-94 | 9.50 | 45938-92 | 7.5 | |
Spring-#Coils | 45376-94 | 21.5_53c | 45372-92 | 21.5_47c |
1996 | Models » | Std | Length | Hug&Ctm | Length |
---|---|---|---|---|---|
Slider Tube | 45395-92 | 24.25 | 45395-92 | 24.25 | |
Damper Tube | 45925-94 | 9.50 | 45938-92 | 7.5 | |
Spring-#Coils | 45376-94 | 21.5_53c | 45372-92 | 21.5_47c | |
1997-1998 | |||||
Slider Tube | 45395-97 | 23.375 | 45395-92 | 24.25 | |
Damper Tube | 45925-97 | 9.0 | 45938-92 | 7.5 | |
Spring-#Coils | 45376-97 | 45372-92 | 21.5_47c |
1999-2003 | Models » | Std&Ctm | Length | Hugger | Length |
---|---|---|---|---|---|
Slider Tube | 45395-97 | 23.375 | 45395-92 | 24.25 | |
Damper Tube | 45925-97 | 9.0 | 45938-92 | 7.5 | |
Spring-#Coils | 45376-97 | 45372-92 | 21.5_47c |
Slider Lower Legs (Except 1200S)
Model(s) | Lower Sliders Left Leg | Lower Sliders Right Leg |
|
---|---|---|---|
1984-1987 1)2) | All | 45912-84 | 45906-84 |
1988-1999 3) 4) 5) 6) 7) 8) 9) | All | 45921-87 | 45923-87 |
2000-2003 10) 11) 12)13) | All (Except 883R) | 45921-00 | 45923-00 |
2002-2003 14)15) | XL883R | 45921-00 | 45922-00 |
1996-2003 Forks For 1200 Sport Model
XL1200S Sport Model - Fork Parts
See also Setting up the 1200S Suspension
Fork Parts | Length | ||
---|---|---|---|
1996-2003 | Slider Tube | 45366-96 | |
Cartridge Damper Tube | 46024-96 | ||
Cartridge Spring-#Coils | 45367-96 |
Slider Lower Legs
Draining 1200S Forks
- 1200S sliders don't have drain plugs. So, here is one way of doing so. 24)
- Basically, once you have the forks out of the bike, remove the large top nut (loosen it slightly while you have the forks clamped in the lower triple tree, (as shown here Part 4 Dismantle the Forks ) while holding the slider. There is no spring pressure on this nut, so it's easy. 25)
- The slider will drop away, but don't let it drop more than a couple of inches or you'll have oil pouring out and not know how much has come out. 26)
- Carefully tip the fork upside-down and pour the oil into a clear measuring container (a wide funnel will help you to not lose any). 27)
- Bring the fork upright and pull the slider to the very top again, pump the fork a few times to empty the damper tube, then turn it upside-down again and pour more oil into your measuring container. Repeat this a couple more times to get as much of the old oil out as possible. 28)
- Check how much oil came out of the fork, make a note of it, then pour the old oil into a waste container. 29)
- Measure the same quantity of fresh oil into the measuring container, then, with the slider still close to the top of its stroke, carefully pour the oil into it. You're pouring the oil between the coils of the spring, so you need to go slowly and keep the fork vertical to avoid losing any. If you can get your hands on a funnel and fit a narrow flexible hose to the end of it, it may make things easier. 30)
- When all the fresh oil is in, thread the slider onto the top nut again; clamp the fork into the bottom triple tree only to hold it steady while you fully tighten the top nut; then push the fork all the way to the top again and clamp it in place. 31)
- Repeat on the other fork. 32)
2004-later Forks
- Be careful, with the Low bikes, taking out the shock caps. There is about 2 1/2 “ of spring preload so the cap wants to come out in a hurry. I am about 200 lbs and fairly strong and it was about all I could do to reinstall the caps with a 1 3/8 socket on a 6” extension on a ratchet. 33)
Damper Tube Forks
Models | Damper Tube Forks | Notes | |||
---|---|---|---|---|---|
Slider Tube | Damper Tube | Spring | |||
2004-2008 | 04-08 883/C 1200C/R 05-08 883R 07 XL50 08 1200L | 45395-04 | 45925-04 | 45376-04 | |
2005-2006 | 883L | 46218-05 | 45938-92 | 46267-05 | |
2007 | 883L | 46218-05 | 47313-07 | 47299-07 | DT#47313-07 believed to be 6.5“ |
2007-2012 | 883N34) 1200N35) | 46218-05 | 47313-07 | 47299-07 | |
2008 | 883L | 45395-04 | 47313-07 | 47299-07 | |
2009-2010 | 883/C/L/R 1200C/L/R | 45395-09 | 45925-09 | 45376-09 | |
2011 | 883L/R 1200C/CP/L/X | 46218-05 | 45938-92 | 46267-05 | |
2012 | ? | ||||
? |
Cartridge Damper Forks
Models | Outer Tube | Left Cart/Rod | Spring | Right Rod | Spring | Notes | |
---|---|---|---|---|---|---|---|
2008-2009 | XR1200 | 46884-08 | 46878-08 | 46882-08 | 46359-06 | 46882-08 | Lt uses Cart. Rt uses Rod + Spring |
2010 | XR1200 | 10628 | 46681-10 | 10418 | 46681-10 | 10418 | 46681-10 is Compl. Rod Assy (each side) |
2011-2013 | XR1200X | 10628 | 46681-10 | 10418 | 46681-10 | 10418 | 46681-10 is Compl. Rod Assy (each side) |
? |
Slider Lower Legs
Model(s) | Lower Sliders Left Leg | Lower Sliders Right Leg | Rt Brk Mount |
|
---|---|---|---|---|
2004 36) | 883/883C/1200C | 45921-00 | 45923-00 | ? |
2004-200737) 38)39)40) | 1200R | 45921-00 | 45922-00 | |
2005-200641)42) | 883/883L 883C/1200C | 45921-00 | 45923-00 | ? |
2005-200743)44)45) | 883R | 46450-05 | 46449-05 | ? |
2007 46) | All except 883R 1200R/1200N | 45921-00 | 45923-00 | ? |
200747) | 1200N | 48726-07 | 48716-07 | ? |
2008 48) | All except 883R 1200R/1200N | 46075-04 | 46076-04 | ? |
2008-2013 49)50)51)52)53)54) | 883R | 46450-08 | 46449-08 | ? |
2008-2009 55)56) | 1200R | 46075-04 | 45922-08 | ? |
2008-2012 57)58)59)60)61) | 1200N | 48726-08 | 48716-08 | ? |
2008-201062)63) | XR1200 | 46880-08 | 46879-08 | ? |
2009 64) | 883/883C/883L 1200C/1200L | 46075-04 | 46076-04 | ? |
2009-2014 65)66)67)68)69) 70) | 883N | 48726-08 | 48716-08 | ? |
2010 71) | 883C/883L 1200C/1200L | 46075-04 | 46076-04 | ? |
2010-2015 72)73)74)75) 76) 77) | XL1200X | 48850-10 | 48849-10 | ? |
2010-2014 78) 79)80)81) 82) | XR1200X | 48786-10 | 48785-10 | ? |
2011 83) | 1200L | 46075-04 | 46076-04 | ? |
2011-2016 84)85) 86) 87) 88)89) | 883L | 49401-11 | 49403-11 | ? |
2012 90) | 1200C/1200CP | 49411-11 | 49412-11 | ? |
2013 91) | 1200V | 46075-04 | 46076-04 | ? |
2013 92) | 1200C/1200C Anv 1200CP/1200CA/1200CB | 49411-11 | 49412-11 | ? |
2014-2016 93) 94) 95) | 1200V | 45500056 | 45500075 | ? |
2014-2015 96) 97) | 883R | 45500055 | 45500076 | ? |
2014-2016 98) 99) 100) | 1200C/1200CP 1200CA/1200CB | 49411-11 | 49412-11 | ? |
2015-2016 101) 102) | 883N | 45500054 | 45500057 | ? |
2015-2016 103) 104) | 1200T | 49401-11 | 49403-11 | ? |
2016 105) | XL1200X | 45500287 | 45500290 | ? |
Reference Additional Information on the 2004+ models in these XLForum Threads:
http://xlforum.net/vbportal/forums/showpost.php?p=3265511
http://xlforum.net/vbportal/forums/showthread.php?t=1827354
Fork Oil Drain Screws
45790-80 - Stock Drain Screw with Washer (Req 2 for 2 forks)
(Starting in 2008, some models do not have fork oil drain screws)
45815-03 - Chrome Fork Slider Drain Screw Kit106)
Screw size is M4 (0.7mm) × 6mm - Includes a pair of chrome allen head drain screws and washers - Uses 2.5mm allen key