Differences

This shows you the differences between two versions of the page.

--- techtalk:evo:wheels01 [2022/09/04 21:13]
ixl2relax [NOTES - Regarding 2000 and Up Conversion Bearings & Spacers]
+++ techtalk:evo:wheels01 [2024/02/14 13:02] (current)
ixl2relax [Rear Hub Spacers]
@@ Line 35: / Line 35: @@
     * The difference between two 15mm bearings & two 21mm bearings is 12mm = .472"
 {{ :techtalk:evo:wheels:wheelbearing-4ssr-in-2ssr-wheel.jpg?400|}}
-  * If placing a 4SSR bearing (21mm wide) in a wheel designed for 2SSR bearings (15mm hub cavity), you will have 6mm of the bearing outside the hub face (meaning the centerline of the bearing is 3mm more outward).((Photo by HandOverFist - http://xlforum.net/forums/showthread.php?t=1392893)) There is no collected data on whether this configuration represents a problem, but it would seem that, when properly spacered and clamped on the axle, this variation should be functional. Safety is the responsibility of each rider.
+  * If placing a 4SSR bearing (21mm wide) in a wheel designed for 2SSR bearings (15mm hub cavity), you will have 6mm of the bearing outside the hub face (meaning the centerline of the bearing is 3mm more outward).((Photo by HandOverFist - https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-drivetrain/sportster-motorcycle-tires-wheels-and-brakes-aa/131446-sportster-wheel-bearing-wheel-fitment?t=1392893)) There is no collected data on whether this configuration represents a problem, but it would seem that, when properly spacered and clamped on the axle, this variation should be functional. Safety is the responsibility of each rider.
-    * See this [[http://xlforum.net/forums/showthread.php?t=1979985|XLForum thread]].
+    * See this [[https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/rubber-mount-sportster-motorcycle-talk-2004-2006/184423-2006-to-2013-rear-wheel-swap?t=1979985|XLForum thread]].
@@ Line 85: / Line 85: @@
 ==== Additional Reading ====
-http://xlforum.net/forums/showthread.php?t=1973858\\
+https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-drivetrain/sportster-motorcycle-tires-wheels-and-brakes-aa/183419-fxr-wheels-to-sporty-swap?t=1973858\\
-http://xlforum.net/forums/showthread.php?t=1457354\\
+https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/134980-front-axle-help-needed?t=1457354\\
-http://xlforum.net/forums/showthread.php?t=257343\\
+https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-drivetrain/sportster-motorcycle-tires-wheels-and-brakes-aa/54134-front-wheel-bearings?t=257343\\
 Also:
-ReddTigger - http://xlforum.net/forums/showthread.php?t=1608830\\
+ReddTigger - https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-drivetrain/sportster-motorcycle-tires-wheels-and-brakes-aa/148088-center-spacer-too-big-for-rear-hub?t=1608830https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-drivetrain/sportster-motorcycle-tires-wheels-and-brakes-aa/148088-center-spacer-too-big-for-rear-hub?t=1608830\\
-Decman - - - http://xlforum.net/forums/showthread.php?t=1788732\\
+Decman - - - https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-drivetrain/sportster-motorcycle-tires-wheels-and-brakes-aa/166497-wheel-bearing-upgrade?t=1788732\\
-Folkie - - - http://xlforum.net/forums/showthread.php?t=1635642\\
+Folkie - - - https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-drivetrain/sportster-motorcycle-transmission-clutch-primary-secondary-drive/151420-rear-axle-diameter?t=1635642\\
@@ Line 103: / Line 103: @@
 Bearing 9276B (South Korea) replaced 9276A (South Korea) around 2017. \\
-Bearing 9252A (South Korea) replaced 9252 (Canada in 2013, Mexico in 2015). \\
+Bearing 9252A (South Korea) has a gray seal and replaced 9252 (Canada in 2013, Mexico in 2015) which has a tan seal. ((TSB M-1449 dated 7-11-2017)) \\
-The SKF bearing replacement for HD 9276B is 6205 2RSJEM (25x52x15 deep groove, double sealed, C3). ((Tomcatt of the XLFORUM http://xlforum.net/forums/private.php?do=showpm&pmid=1053586)) \\
+Bearing 9252A installs with the red side inboard and the gray side outboard, towards the installation tool. \\
+The SKF bearing replacement for HD 9276B is 6205 2RSJEM (25x52x15 deep groove, double sealed, C3). ((Tomcatt of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-drivetrain/sportster-motorcycle-transmission-clutch-primary-secondary-drive/199142-drastic-failure-how-to-diagnose/page2#post4384748)) \\
 (From HD Parts Catalogs and online fiche sources ((http://partsfinder.onlinemicrofiche.com/ronnies/partsfinder.htm))   unless noted otherwise) \\
@@ Line 126: / Line 127: @@
 ^**A05**|**43895-00** \\ 2000-2007 \\ **All wheels**|**3/4" Stainless Steel** \\ **Threads**: 1/2" x 20|**Axle Only**. Also required are (**6590HW**) axle washer \\ (**7068**) lock washer \\ (**7956**) nut. (Flange nut 11/16" socket head) (Standard nut 3/4" socket head)|
 ^:::|Additional \\ Information|Same dims as A04 except Head Length \\ **Head Dia**: 0.869",  **Head Length**: 2.546", \\ **Usable shaft Length**: 5.125", **Shaft Dia**: 0.7485", **@ bearing surfaces**, 0.7435" **@ center hub spacer**. \\ **Shoulder: Dia**: 0.667",  **Length**: 1.300", **Overall length**: 9.850", **Weight** (axle only): 1.180 lbs.||
-^**A06**|**43895-08** \\ 2008-2013 \\ **All wheels except**: \\ 16" & 18" cast \\ 3, 5, 9 spoke, \\ 16" Laced|**25 mm**|**2008 Axle Only**. Also required are **(6594)** axle washer \\ **(7068)** lock washer \\ **(7813A)** 5/8"-18 x 9/16" x 15/16" head - nut ((sportytrace of the XLFORUM http://xlforum.net/forums/showthread.php?t=1918219&highlight=axle)). \\ **2009 and up  Axle Only**. Also required are (6594) axle washer \\ (7813A) 5/8"-18 x 9/16" x 15/16" head - nut ((sportytrace of the XLFORUM http://xlforum.net/forums/showthread.php?t=1918219&highlight=axle))|
+^**A06**|**43895-08** \\ 2008-2013 \\ **All wheels except**: \\ 16" & 18" cast \\ 3, 5, 9 spoke, \\ 16" Laced|**25 mm**|**2008 Axle Only**. Also required are **(6594)** axle washer \\ **(7068)** lock washer \\ **(7813A)** 5/8"-18 x 9/16" x 15/16" head - nut ((sportytrace of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-general-discussion-and-problems/178455-what-size-socket-for-08-axle-nut?t=1918219&highlight=axle)). \\ **2009 and up  Axle Only**. Also required are (6594) axle washer \\ (7813A) 5/8"-18 x 9/16" x 15/16" head - nut ((sportytrace of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-general-discussion-and-problems/178455-what-size-socket-for-08-axle-nut?t=1918219&highlight=axle))|
 ^:::|Additional \\ Information|||
-^**A07**|**41628-08** \\ 2009-2022 \\ **All** \\ 16" & 18" cast 3, 5, 9 spoke, \\ 16" laced only|**25mm**|**Axle Only**. Also required are **(6594)** axle washer \\ **(7813A)** 5/8"-18 x 9/16" x 15/16" head - nut ((sportytrace of the XLFORUM http://xlforum.net/forums/showthread.php?t=1918219&highlight=axle))|
+^**A07**|**41628-08** \\ 2009-2022 \\ **All** \\ 16" & 18" cast 3, 5, 9 spoke, \\ 16" laced only|**25mm**|**Axle Only**. Also required are **(6594)** axle washer \\ **(7813A)** 5/8"-18 x 9/16" x 15/16" head - nut ((sportytrace of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-general-discussion-and-problems/178455-what-size-socket-for-08-axle-nut?t=1918219&highlight=axle))|
 ^:::|Additional \\ Information|||
-^**A08**|**43000001** \\ 2014-2016 \\ **All wheels except**: \\ 16" & 18" cast \\ 5, 9 spoke \\ 16" laced|**25mm**|**Axle Only**. Also required are **(6594)** axle washer \\ **(7813A)** 5/8"-18 x 9/16" x 15/16" head - nut ((sportytrace of the XLFORUM http://xlforum.net/forums/showthread.php?t=1918219&highlight=axle))|
+^**A08**|**43000001** \\ 2014-2016 \\ **All wheels except**: \\ 16" & 18" cast \\ 5, 9 spoke \\ 16" laced|**25mm**|**Axle Only**. Also required are **(6594)** axle washer \\ **(7813A)** 5/8"-18 x 9/16" x 15/16" head - nut ((sportytrace of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-general-discussion-and-problems/178455-what-size-socket-for-08-axle-nut?t=1918219&highlight=axle))|
 ^:::|Additional \\ Information|||
@@ Line 209: / Line 210: @@
 ^H03|ALL 19" CAST 13 SPOKE, OR 19", 21" LACED FRONT WHEEL - Uses 2, (9267) 1-Piece 3/4" Sealed Roller Bearings||
 |2000-2007|HD Part #|CENTER HUB BEARING SPACER (no flange)|
-|:::|43613-00|ID=3/4" Length=3.040" ((Preston Cycle Products - See REF Section)) ((http://xlforum.net/forums/showthread.php?t=2043161)) ((2000 HD Sportster Parts Catalog pg 57, 59)) ((2001 HD Sportster Parts Catalog pg 59, 61)) ((2002 HD Sportster Parts Catalog pg 59, 61)) ((2003 HD Sportster Parts Catalog pg 59, 61)) ((2004 HD Sportster Parts Catalog pg 59, 61))|
+|:::|43613-00|ID=3/4" Length=3.040" ((Preston Cycle Products - See REF Section)) ((https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-drivetrain/sportster-motorcycle-tires-wheels-and-brakes-aa/191541-front-wheel-bearing-spacer?t=2043161)) ((2000 HD Sportster Parts Catalog pg 57, 59)) ((2001 HD Sportster Parts Catalog pg 59, 61)) ((2002 HD Sportster Parts Catalog pg 59, 61)) ((2003 HD Sportster Parts Catalog pg 59, 61)) ((2004 HD Sportster Parts Catalog pg 59, 61))|
 |H04| ||
 ^H05|ALL 19" CAST 13 OR 9 SPOKE, 19" OR 21" LACED OR PROFILE LACED FRONT WHEEL - Uses 2, (9276) '08-'11 / (9276A) '12-'13 25 mm Ball Bearings \\ Uses 1 right (9276A) '14 & up and either 1- left (9276A) non ABS or 1- left (9252) w/ ABS 25 mm Ball Bearings||
@@ Line 239: / Line 240: @@
 ^BS01|**67127-84A** steel\\ Speedometer Pickup \\ ID: 0.753" ... OD: 1.125" \\ Width: 0.930" nominal |**43358-83A** steel \\ \\ ID: 0.752" ... OD: 1.125" \\ Width: 0.380"|**1986-1994** Cast or Laced Front Wheel|
 ^BS02|**43617-95** steel \\ ID: 0.753" ... OD: 1.125" \\ Width: 0.930"|**43358-83A** steel \\ ID: 0.752" ... OD: 1.125" \\ Width: 0.380"|**1995-1999** 19" Cast 13 Spoke or 19" / 21" Laced Front Wheel|
-^BS03|**43617-00A** alum.\\  ID: 0.762" ... OD: 1.125" \\ Width: 0.520" |**43358-00** alum. w/ 3 'V' notches\\ ID: 0.762" ... OD: 1.125" \\ Width: 0.140" |**2000-2007** 19" Cast 13 Spoke or 19" / 21" Laced or Profile Laced Front Wheel\\ \\ Sizes based on this [[http://xlforum.net/forums/showthread.php?t=600256|XLForum Thread]]|
+^BS03|**43617-00A** alum.\\  ID: 0.762" ... OD: 1.125" \\ Width: 0.520" |**43358-00** alum. w/ 3 'V' notches\\ ID: 0.762" ... OD: 1.125" \\ Width: 0.140" |**2000-2007** 19" Cast 13 Spoke or 19" / 21" Laced or Profile Laced Front Wheel\\ \\ Sizes based on this [[https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-drivetrain/sportster-motorcycle-tires-wheels-and-brakes-aa/81523-00-05-front-wheel-spacer-width?t=600256|XLForum Thread]]|
 |BS04| |||
 ^BS05|**43522-08**\\ ID: 1.000" ... OD: 1.480\\ Width: 0.648|**43358-08**\\ ID: 1.000" ... OD: 1.480\\ Width: 0.317|**2008-2013** 19" Cast 13 Spoke or 19" / 21" Laced or Profile Laced Front Wheel|
@@ Line 279: / Line 280: @@
 ^**A24**|**41176-05** \\ 2005-2007 \\ **All Wheels**|**1" dia steel** (0.9975") \\ 1-1/8" (28mm) Hex Head \\ **Threads**: 3/4"x16| (**40582-05**) axle spacer washer,  \\ (**8039**) flange nut w/ 1-1/8" (28mm) hex head \\ (**41296-05**) retaining ring|
 ^:::|Additional Information|**Usable shaft length**: 11.120", **Overall Bolt Length**: 12.350", **Weight** (axle only): 2.830 lbs.||
-^**A25**|**41176-08** \\ 2008-2016 \\ **All except cast 3 spoke** | **25mm dia steel** (0.982") \\ 1-1/8" (28mm) Hex Head ((folkie of the XLFORUM http://xlforum.net/forums/showthread.php?t=558412&highlight=axle)) ((keef of the XLFORUM http://xlforum.net/forums/showthread.php?t=558412&highlight=axle&page=3)) \\ **Threads**: M24x ? (O.D.: 0.936")|**(6551)** axle washer,  \\ **(8190)** flange nut w/ 1-1/4"  (36mm) hex head ((hexnut of the XLFORUM http://xlforum.net/forums/showthread.php?t=558412&highlight=axle&page=2)) \\ **(41229-08)** retaining ring|
+^**A25**|**41176-08** \\ 2008-2016 \\ **All except cast 3 spoke** | **25mm dia steel** (0.982") \\ 1-1/8" (28mm) Hex Head ((folkie of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-general-discussion-and-problems/77759-rear-axle-nut-size?t=558412&highlight=axle)) ((keef of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-general-discussion-and-problems/77759-rear-axle-nut-size/page3?t=558412&highlight=axle&page=3)) \\ **Threads**: M24x ? (O.D.: 0.936")|**(6551)** axle washer,  \\ **(8190)** flange nut w/ 1-1/4"  (36mm) hex head ((hexnut of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-general-discussion-and-problems/77759-rear-axle-nut-size/page2?t=558412&highlight=axle&page=2)) \\ **(41229-08)** retaining ring|
 ^:::|Additional Information|**Usable shaft length**: 11.120", **Overall Bolt Length**: 12.512", **Weight** (axle only): 1.685 lbs. \\ Hollow center with stepped hole, 0.630", right side thru to left beginning of threads, \\ then stepped to .0530" under threads to the end of axle||
-^**A26**|**41627-08** \\ 2009-2013 \\ **Cast 3 spoke only**|**25mm dia steel** (0.982") \\ (1-1/8") (28mm) socket ((folkie of the XLFORUM http://xlforum.net/forums/showthread.php?t=558412&highlight=axle)) ((keef of the XLFORUM http://xlforum.net/forums/showthread.php?t=558412&highlight=axle&page=3))|**(6551)** axle washer,  \\ **(8190)** flange nut w/ 1-1/4" (36mm) hex head ((hexnut of the XLFORUM http://xlforum.net/forums/showthread.php?t=558412&highlight=axle&page=2)) \\ **(41229-08)** retaining ring|
+^**A26**|**41627-08** \\ 2009-2013 \\ **Cast 3 spoke only**|**25mm dia steel** (0.982") \\ (1-1/8") (28mm) socket ((folkie of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-general-discussion-and-problems/77759-rear-axle-nut-size?t=558412&highlight=axle)) ((keef of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-general-discussion-and-problems/77759-rear-axle-nut-size/page3?t=558412&highlight=axle&page=3))|**(6551)** axle washer,  \\ **(8190)** flange nut w/ 1-1/4" (36mm) hex head ((hexnut of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-general-discussion-and-problems/77759-rear-axle-nut-size/page2?t=558412&highlight=axle&page=2)) \\ **(41229-08)** retaining ring|
 ^:::|Additional Information|  ||
@@ Line 303: / Line 304: @@
   * Don't forget the Swingarm slots & Axle Adjusters need to match the axle diameter. Axle Adjusters changed from '04-earlier (centered) to '05-later (flush to inside)
   * NOTE: If placing a 21mm width bearing in a wheel designed for bearings of 15mm width, you will have 6mm of the bearing outside the hub face (meaning the centerline of the bearing is 3mm more outward). There is no collected data on whether this configuration represents a problem, but it would seem that, when properly spacered and clamped on the axle, this variation should be functional. Safety is the responsibility of each rider.
-    * See this [[http://xlforum.net/forums/showthread.php?t=1979985|XLForum thread]].
+    * See this [[https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/rubber-mount-sportster-motorcycle-talk-2004-2006/184423-2006-to-2013-rear-wheel-swap?t=1979985|XLForum thread]].
@@ Line 347: / Line 348: @@
 ==== Rear Hub Spacers ====
-^H21|16" CAST 9 SPOKE REAR FRONT WHEEL  - \\ Uses 2, (9052) 2-Piece 3/4" Timken Tapered Roller Bearings||
+^H21|16" CAST 9 SPOKE REAR WHEEL  - \\ Uses 2, (9052) 2-Piece 3/4" Timken Tapered Roller Bearings||
 |1986-1991 \\ Chain Drive|HD PART #|CENTER HUB BEARING SPACER (no flange)|
 |::: |43604-78|Length - 4.420" (orange) ((1986-1990 HD Sportster Parts Catalog pg 61)) ((1991 HD Sportster Parts Catalog pg 55))|
@@ Line 410: / Line 411: @@
 ^   ^Against Left Bearing^Against Right Bearing^Against Right Spacer^Year Model Info^
-^BS21|40906-82|40906-82|41606-77 - (3/4" long) ((http://xlforum.net/forums/showthread.php?t=1979857&highlight=axle))|1986-1987 Cast or Laced Rear Wheel|
+^BS21|40906-82|40906-82|41606-77 - (3/4" long) ((https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/184313-82-xlh-rear-axle-length?t=1979857&highlight=axle))|1986-1987 Cast or Laced Rear Wheel|
-^BS22|43654-86A|43654-86A|41606-77 - (3/4" long) ((http://xlforum.net/forums/showthread.php?t=1979857&highlight=axle))|1982-1987 Cast or Laced Rear Wheel|
+^BS22|43654-86A|43654-86A|41606-77 - (3/4" long) ((https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/184313-82-xlh-rear-axle-length?t=1979857&highlight=axle))|1982-1987 Cast or Laced Rear Wheel|
 ^BS23|**43654-86A** \\ ID: 0.07515"\\ OD: 1.125" (1-1/8") \\ Width: 0.728" (Nom 3/4") |**43654-86A** \\ ID: 0.07515"\\ OD: 1.125" (1-1/8") \\ Width: 0.728"|**41594-73** \\ ID: 0.07515"\\ OD: 1.125" (1-1/8") \\ Width: 0.643"|**1988-1999** Cast or Laced Rear Wheel|
 ^BS24|43654-00|40910-00| N/A |2000-2002 Cast or Laced Wheel|
@@ Line 429: / Line 430: @@
 |{{:techtalk:evo:wheels:2004_rear_bearing_spacers_1_by_hippysmack.jpg?direct&300|}}|{{:techtalk:evo:wheels:2010_and_2013_wheel_spacer_by_wachuko.png?direct&300|}}|
-|  2004 R - 40930-04, L - 43654-00A  |  2010 and 2013 Wheel Space Comparison ((photo by wachuko of the XLFORUM http://xlforum.net/forums/showthread.php?t=1688133&page=3)) |
+|  2004 R - 40930-04, L - 43654-00A  |  2010 and 2013 Wheel Space Comparison ((photo by wachuko of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/efi-sportster-motorcycle-talk-2007-and-up/157717-my-2013-hd-forty-eight-build/page3?t=1688133&page=3)) |
 | {{:techtalk:evo:wheels:2005_rear_outside_spacers_3_by_hippysmack.jpg?direct&300|}} |{{:techtalk:evo:wheels:2005_rear_outside_spacers_2_by_hippysmack.jpg?direct&300|}}|
@@ Line 501: / Line 502: @@
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\\
-ReddTigger - http://xlforum.net/forums/showthread.php?t=1608830 \\
+ReddTigger - https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-drivetrain/sportster-motorcycle-tires-wheels-and-brakes-aa/148088-center-spacer-too-big-for-rear-hub?t=1608830 \\
 The hub spacer must pass thru the center hole of the wheel (cleanly) and make contact with the left & right inner bearing surfaces.
@@ Line 545: / Line 546: @@
 <file>
-http://xlforum.net/forums/showthread.php?t=1788732
+https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-drivetrain/sportster-motorcycle-tires-wheels-and-brakes-aa/166497-wheel-bearing-upgrade?t=1788732
 Thread regarding converting Timken angular roller bearings to sealed ball bearings.
 Decman includes a conceptual diagram of installing sealed bearings.
@@ Line 990: / Line 991: @@
 |{{:techtalk:evo:wheels:2018_1200n_mags_1_by_whylee.jpg?direct&300|}}|{{:techtalk:evo:wheels:2018_1200n_mags_2_by_whylee.jpg?direct&300|}}|{{:techtalk:evo:wheels:2018_1200n_mags_3_by_whylee.jpg?direct&300|}}|
-|  2018 XL1200N Mags ((photos by Whylee of the XLFORUM http://xlforum.net/forums/showthread.php?p=5704902#post5704902))  |||
+|  2018 XL1200N Mags ((photos by Whylee of the XLFORUM https://www.xlforum.net/showthread.php?p=5704902#post5704902))  |||
 [[:techtalk:menu|{{:techtalk:gototechnicalmenu.jpg|}}]]

Trace:

Differences

Navigation

Search

Toolbox