Differences

This shows you the differences between two versions of the page.

--- techtalk:ih:oil03g [2024/09/24 03:44] – [Pump Body Damage] hippysmack
+++ techtalk:ih:oil03g [2024/09/26 20:39] (current) – [Idler Shaft Removal] hippysmack
@@ Line 310: / Line 310: @@
 ====== Idler Shaft Removal ======
-If the idler shaft is damaged, you can remove it by applying heat to the pump body and the shaft should fall out. \\
+If the idler shaft is damaged, you can remove it by applying heat (150°F) to the pump body and the shaft should fall out. \\
-Then press in a new shaft making sure it is set even on both sides of the pump.
+Heat the pump body to (150°F) to install idler gear shaft. Shaft may not protrude above either oil pump body face. ((1972-2003 XR-750 Service Manual)) \\
 \\

Trace: