Differences

This shows you the differences between two versions of the page.

--- techtalk:ref:body30l [2019/07/26 21:12]
hippysmack [Highway Bars]
+++ techtalk:ref:body30l [2022/03/09 05:00]
ixl2relax [REF: Body Parts - Sub-01L]
@@ Line 1: / Line 1: @@
 [[:techtalk:menu|{{  :techtalk:gototechnicalmenu.jpg|}}]]
-====== REF: Body Parts - Sub-01L ======
+====== REF: Body Parts - Sub-30L ======
 \\
 ====== Highway Pegs and Multiple Foot Positioning ======
@@ Line 7: / Line 7: @@
 \\
 ===== HD (49053-04A) =====
-Adjustable highway peg support kit: $199.95 \\
+Adjustable highway peg support kit: $199.95 (For 2004-up models) \\
 Use with your choice of H-D® small male-mount-style footpegs (not included) \\
@@ Line 14: / Line 14: @@
 Article by IXL2Relax of the XLFORUM ((http://xlforum.net/forums/showthread.php?t=1915653)) \\
-This a mod for adding highway pegs on the stock front engine mounts. \\
+This a mod for adding highway pegs on the stock front engine mounts. (up to 2003 model - 1994 example)\\
 This setup uses a combination of mids and highway pegs. ((IXL2Relax of the XLFORUM http://xlforum.net/forums/showthread.php?p=5295014&highlight=highway#post5295014)) \\
 It allows both stretched cruising and on-the-pegs control when appropriate for either. \\
+It utilizes the stock engine mounts for 1984-2003 Models:\\
+-84A - Engine Mounting Plate - Right Front\\
+-84 -- Engine Mounting Plate - Left Front\\
+Select whatever pegs you prefer on the end of the bars.
 My inseam is about 30 inches and I've always preferred my feet forward when riding. \\
@@ Line 68: / Line 71: @@
 </blockquote>
 |{{:techtalk:ref:body:kuryakyn_adjustable_mustache_bar_1_by_roosterman.jpg?direct&300|}}|{{:techtalk:ref:body:kuryakyn_adjustable_mustache_bar_2_by_roosterman.jpg?direct&300|}}|{{:techtalk:ref:body:kuryakyn_adjustable_mustache_bar_3_by_roosterman.jpg?direct&300|}}|
+====== Running Forward Controls and Mid pegs ======
+Article by MotoRacerGabe of the XLFORUM ((http://xlforum.net/forums/showthread.php?t=1587864)) \\
+The bike below (2012 XL1200V) came with forward controls and mid pegs were added for more foot positions. \\
+The mid pegs add more leverage when at higher speeds and in cornering. \\
+It also adds for a greater amount of foot positions (from riding on the toes on the mid pegs or having your heels on the forwards. \\
+Normally, it wouldn't be possible to add mid pegs with forward controls due to the brake linkage for the forward controls. \\
+The left side mid peg bolted right up. \\
+{{:techtalk:ref:body:mids_and_forwards_1_by_motoracergabe.jpg?direct&300|}} ((photo by MotoRacerGabe of the XLFORUM http://xlforum.net/forums/showthread.php?t=1587864)) {{:techtalk:ref:body:mids_and_forwards_2_by_motoracergabe.jpg?direct&300|}} ((photo by MotoRacerGabe of the XLFORUM http://xlforum.net/forums/showthread.php?t=1587864)) \\
+The right side wasn't really that hard to make work. \\
+All you have to do is put a space between the mid-mount and where it screws into the frame. \\
+You'll have to measure how much space is needed. \\
+In the pic below, two matching nuts were used as spacers. \\
+However, the distance was still a tad too short to clear the brake linkage completely. \\
+So the linkage was hitting the mount. Then, two thick washers were added to them to give the mount some more space. \\
+You can see in the first pic below where the linkage was rubbing against the mount and took off the black paint. \\
+With an additional washer it didn't not touch. \\
+{{:techtalk:ref:body:mids_and_forwards_3_by_motoracergabe.jpg?direct&300|}} ((photo by MotoRacerGabe of the XLFORUM http://xlforum.net/forums/showthread.php?t=1587864)) {{:techtalk:ref:body:mids_and_forwards_4_by_motoracergabe.jpg?direct&300|}} ((photo by MotoRacerGabe of the XLFORUM http://xlforum.net/forums/showthread.php?t=1587864)) {{:techtalk:ref:body:mids_and_forwards_5_by_motoracergabe.jpg?direct&300|}} ((photo by MotoRacerGabe of the XLFORUM http://xlforum.net/forums/showthread.php?t=1587864)) \\
+====== Highway Bars ======
+|  Homemade highway bar. ((photos by Hopper of the XLFORUM http://xlforum.net/forums/showthread.php?t=209347&highlight=float+level&page=21))  ||
+|{{:techtalk:ref:body:homemade_highway_bar_1_by_hopper.jpg?direct&300|}}|{{:techtalk:ref:body:homemade_highway_bar_2_by_hopper.jpg?direct&300|}}|
+====== Crash Bar Pegs ======
+This Engine Guard Peg Mounting Kit (50964-98) was purchased from the dealership for installing pegs on crash bars (engine guard). \\
+Three piece design with tiny Allen head screws. \\
+{{:techtalk:ref:body:highway_bar_pegs_1_by_hippysmack.jpg?direct&300|}} ((photo by Hippysmack)) {{:techtalk:ref:body:highway_bar_pegs_2_by_hippysmack.jpg?direct&300|}} ((photo by Hippysmack)) \\
+You have to install the center piece onto 1 long piece, slide that onto the bar and then install the second long piece. \\
+It will still be loose until you mount the peg clevis to it. This pulls both ends together and tightens around the bar. \\
+It can be mounted as shown or swung forward for a longer reach. \\
+{{:techtalk:ref:body:highway_bar_pegs_3_by_hippysmack.jpg?direct&300|}} ((photo by Hippysmack))
+{{:techtalk:ref:body:highway_bar_pegs_4_by_hippysmack.jpg?direct&300|}} ((photo by Hippysmack)) {{:techtalk:ref:body:highway_bar_pegs_5_by_hippysmack.jpg?direct&300|}} ((photo by Hippysmack)) \\
+====== Aftermarket Heel Rest ======
+These were purchased off Ebay but should be pretty simple to put together or make from scratch. \\
+{{:techtalk:ref:body:aftermarket_heel_rest_2_by_hippysmack.jpg?direct&300|}} ((photo by Hippysmack)) {{:techtalk:ref:body:aftermarket_heel_rest_4_by_hippysmack.jpg?direct&300|}} ((photo by Hippysmack)) \\
+These clevis' came from the highway bar kit above and have internal 1/2" (fine) threads. You may need to buy a couple 1/2"x20 bolts to cut to size. \\
+Install the peg on the clevis as normal and run a 3/8" bolt thru the clevis into the heel rest bracket. \\
+{{:techtalk:ref:body:aftermarket_heel_rest_5_by_hippysmack.jpg?direct&300|}} ((photo by Hippysmack)) {{:techtalk:ref:body:aftermarket_heel_rest_6_by_hippysmack.jpg?direct&300|}} ((photo by Hippysmack)) {{:techtalk:ref:body:aftermarket_heel_rest_7_by_hippysmack.jpg?direct&300|}} ((photo by Hippysmack)) \\
+Then just snug all the bolts, position the assembly where you want it and tighten the bolts. \\
+The brackets are very solid when done and the heel rest works good on long rides. \\
+{{:techtalk:ref:body:aftermarket_heel_rest_8_by_hippysmack.jpg?direct&300|}} ((photo by Hippysmack)) {{:techtalk:ref:body:aftermarket_heel_rest_9_by_hippysmack.jpg?direct&300|}} ((photo by Hippysmack)) {{:techtalk:ref:body:highway_bar_pegs_6_by_hippysmack.jpg?direct&300|}} ((photo by Hippysmack)) \\
+====== HD Adjustable Highway Peg Supports (L1984-2003) ======
+These "L" shaped support arms mount directly to the center (5th) open hole in the lower front motor mounts. \\
+{{ :pdf-instruction:is-j01841.pdf |Click Here}} to download/view the instruction sheet for installation. \\
+{{:techtalk:ref:body:1984_late-2003_sportster_adjustable_highway_peg_supports_by_animalhouse2010.jpg?direct&400|}} ((photo courtesy of Ebay seller, animalhouse2010, [[https://www.ebay.com/str/animalhouse2010?_trksid=p2047675.l2563|Link to Ebay store:]] )) \\
 \\

Trace:

Differences

Navigation

Search

Toolbox