Differences

This shows you the differences between two versions of the page.

--- techtalk:ref:body51 [2017/10/17 02:31]
hippysmack
+++ techtalk:ref:body51 [2024/01/10 01:53] (current)
hippysmack
@@ Line 5: / Line 5: @@
 ====== Fender / Luggage Racks ======
-===== Sub-Documents =====
-* . . . [[techtalk:ref:body01a|Custom Luggage Rack by Redbeard2]]
+**Fender Rack by Bluto**
+Bluto (of the XLForum.net) gave the following information about this fender rack:\\
+I made a rack that bolts up to the HD Quick-Detach Sideplates.
+The overall dimensions are 11" long x 8-1/2" wide.
+The solid vertical bars which reach down into the sideplates are 4-1/2" long\\
+and are made of 9/16" square stock which hardware stores don't carry\\
+so I ordered a foot of 9/16" keystock from Amazon for about $5 IIRC.\\
+HD uses 1/4-20 mounting screws so I did the same. Drilled and tapped for them.
+The rest of the rack is made from 16ga ERW steel tubing\\
+plus some 1/8" plate for the gussets and box mounts.\\
+The square frame tubes are 3/4". The round crossbars are 1/2".
+{{:techtalk:ref:body:fenderrack-bluto-1.jpg?500|}}{{:techtalk:ref:body:fenderrack-bluto-2.jpg?350|}}((Pics from Bluto - https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-styles/chopper-bobber-talk/200479-sissy-bar-with-hd-quick-release-bracket?t=2077478))
+\\
+===== Sub-Documents =====
+* . . . [[techtalk:ref:body51a|Custom Luggage Rack by Redbeard2]]
+* . . . [[techtalk:ref:body51b|Custom Travel Rack by Zoharo]]
-Custom luggage racks create a one of a kind look to your bike. The possibilities are endless once you pour some creativity into it. Below are pics of custom luggage racks to give you some perceptive on building your own. \\ Click on a pic to enlarge:
+====== Luggage ======
-|{{:techtalk:ref:body:custom_luggage_rack_4_by_redbeard2.jpg?direct&300|}}|{{:techtalk:ref:body:custom_luggage_rack_1_by_redbeard2.jpg?direct&300|}}|     {{:techtalk:ref:body:custom_luggage_rack_3_by_redbeard2.jpg?direct&300|}}|
+Here is an FLT luggage rack bent to fit the fender bolts on a 2007 Sportster XL-50, Tourpak on top. \\
-|Starting with a one off used aluminum rack ((Redbeard2 of the XLFORUM http://xlforum.net/vbportal/forums/showthread.php?t=2026225&page=2))|Fabricate some 1/2" 6061 aluminum brackets ((Redbeard2 of the XLFORUM http://xlforum.net/vbportal/forums/showthread.php?t=2026225&page=2))|Add some 1-1/2" x 1/2" 6061 aluminum struts ((Redbeard2 of the XLFORUM http://xlforum.net/vbportal/forums/showthread.php?t=2026225&page=2))|
+{{:techtalk:ref:body:flt_tourpak_on_2007_xl50_by_bob_f.jpg?direct&300|}} ((photo by Bob F of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-styles/sport-glide-sportster-motorcycle-touring/147036-06-xl883c-solo-sportstour-makeover/page2?t=1598344&page=2)) \\
-|{{:techtalk:ref:body:custom_luggage_rack_2_by_redbeard2.jpg?direct&300|}}|{{:techtalk:ref:body:custom_luggage_rack_5_by_redbeard2.jpg?direct&300|}}|    {{:techtalk:ref:body:custom_luggage_rack_6_by_redbeard2.jpg?direct&300|}}|
-|Measure, measure, measure then paint ((Redbeard2 of the XLFORUM http://xlforum.net/vbportal/modules/Jig/index.php))|Model to check fitment / look............................................((Redbeard2 of the XLFORUM http://xlforum.net/vbportal/modules/Jig/index.php)) ||
-|{{:techtalk:ref:body:custom_luggage_rack_7_by_redbeard2.jpg?direct&300|}}|{{:techtalk:ref:body:custom_luggage_rack_8_by_redbeard2.jpg?direct&300|}}|{{:techtalk:ref:body:custom_luggage_rack_9_by_redbeard2.jpg?direct&300|}}|
-|Tighten it all down ((Redbeard2 of the XLFORUM http://xlforum.net/vbportal/modules/Jig/index.php))|Model some more ((Redbeard2 of the XLFORUM http://xlforum.net/vbportal/modules/Jig/index.php))|Add an aluminum 6061 insert into the sissybar \\ (laser etched) to match the rack ((Redbeard2 of the XLFORUM http://xlforum.net/vbportal/modules/Jig/index.php)) |

Trace:

Differences

Navigation

Search

Toolbox