Differences

This shows you the differences between two versions of the page.

--- techtalk:ref:engctl50b [2019/12/15 01:13]
ixl2relax [Daytona Twin Tec TC88A Map Files - Aftermarket Ignition Maps]
+++ techtalk:ref:engctl50b [2019/12/23 11:36]
ixl2relax [REF: Engine Control 50b]
@@ Line 1: / Line 1: @@
 [[:techtalk:menu|{{  :techtalk:gototechnicalmenu.jpg|}}]]
-====== REF: Engine Control50 ======
+====== REF: Engine Control 50b ======
 \\
-====== Daytona Twin Tec TC88A Map Files - Aftermarket Ignition Maps ======
-{{ :techtalk:ref:engctl:tc88a-module-rocketmangb.jpg?300|}}
-The TC88A Ignition Module is usable on the 2004-2006 carburetored models of the Sportsters. It replaces the stock Ignition Module.((Image from Rocketmangb of the XLForum))
-The TC88A has dials on the module for selecting pre-programed ignition timing maps and choosing the level of the RPM Limiter. This is accomplished with two dials for timing maps and two dials for the RPM Limit.
+<font 24px/Arial, , ;;#ffff80;;#000080>☚———————————— USER BEWARE! ————————————☛</font>
-One of the timing dials sets the Initial Timing while the second dial selects the Timing Advance Slope.
+There is **NO WARRANT OF USABILITY** for the MAP Files that are made available on the Sportsterpedia. These are being hosted for evaluation\\
+by individual users and **ALL USERS MUST MAKE THEIR OWN EVALUATION** of the suitability of using these MAP Files for their intended\\
-One of the RPM Limit dials chooses the x1000 value and the other selects the x100 value. If a setting is selected at 3000 or below, that is understood to mean NO RPM LIMITER will be active. BE CAREFUL!
+engine configuration!\\
+\\
+If you have been advised by the supplier of your engine parts to use a particular map, it makes sense to follow their recommendation,\\
-In addition to the pre-programmed timing maps (selectable by the dials), the unit can be user-programmed to utilize customized timing advance maps. To use these customized maps, you must have a computer interface, such as the Daytona USB Interface (18014), and the Daytona PC-Link Software, to communicate with the TC88A unit. (see this [[http://xlforum.net/forums/showthread.php?t=780755|XLForum Thread]].)
+especially during the break-in period. If you wish to change to some other map later, it still makes sense to seek the advice of your\\
+configuration supplier to learn of any concerns they might have for you to consider.
-===== Table Data Files - '.tbl' =====
-The TC88A PC-Link Software will allow you to upload customized ignition timing files into the module. These filenames end with a '.tbl', indicating they are Table Files (such as Jester_Delta.tbl). These files are actually text files and the PC-Link Software will put that data into the memory of the TC88A to cause it to respond according to your customized settings.
-Here's a sample of what data is actually contained in the '.tbl' files (this is taken from the Jester_Delta.tbl file) :
-| This is the text that is in the .tbl file\\ \\ GRID 16 8\\ -1\\ 500 1\\ 0 0\\ 0 0 0 0 0 0 0 0 \\ 3.344 3.344 3.168 3.344 3.696 4.048 4.4 5.104 \\ 6.512 6.688 6.688 6.864 7.392 8.272 8.976 10.032 \\ 10.032 10.032 10.208 10.56 11.264 12.32 13.552 14.96 \\ 13.552 13.552 13.728 14.256 15.136 16.544 18.128 20.064 \\ 17.072 17.072 17.248 17.952 19.184 20.768 22.88 24.992 \\ 20.24 20.416 20.768 21.648 22.88 24.992 27.28 29.568 \\ 23.056 23.584 23.936 24.992 26.576 28.864 31.152 33.616 \\ 25.344 25.872 26.752 27.808 29.568 32.032 34.672 37.312 \\ 26.752 27.632 28.688 29.92 32.032 34.672 37.488 39.952 \\ 27.632 28.512 29.744 31.152 33.44 36.432 39.072 41.184 \\ 27.984 28.864 30.272 31.856 34.32 37.312 39.776 41.536 \\ 27.984 29.04 30.448 32.208 34.672 37.664 40.128 41.536 \\ 27.984 29.216 30.448 32.384 34.848 37.84 40.128 41.536 \\ 27.984 29.216 30.624 32.56 35.024 38.016 40.128 41.536 \\ 27.984 29.216 30.624 32.56 35.024 38.016 40.128 41.536 \\ !Module Parameters\\ !InitialTiming:  0\\ !RearOffset:  0\\ !RPMLimit:  3000\\ !CrankRevs:  2\\ !FixedLimFlag: False\\ !SelEEPROMTblFlag: True\\ !FixedInitialTmgFlag: False\\ !VSSFreq:  1431\\ !TachEnableFlag: True | This is what the table data in the middle of the .tbl file represents to the\\ engine module. This is what sets the timing advance based on the\\ RPM parameter and the MAP sensor parameter.\\ \\ \\ {{:techtalk:ref:engctl:tc88maps:sample-grid-data-jester_delta-tbl.jpg?435|}}\\ \\ \\ While oriented differently here in the file listing, where MAP is horizontal\\ and RPM is vertical, this is the same numerical data that is shown in the\\ Table Diagrams for each Ignition Timing Map below.\\ \\ However, the Table Diagram only shows the data with one decimal digit\\ (rounded up as appropriate). Perhaps it onlys stores the rounded number. |
-Sample 'Jester_Delta' Table Diagram shown in PC-Link when that file is loaded. Here, MAP is vertical & RPM is horizontal.\\
-{{:techtalk:ref:engctl:tc88maps:jester_delta:jester_delta-t.jpg?800|}}
+<font 24px/Arial, , ;;#ffff80;;#000080>☚———————————— USER BEWARE! ————————————☛</font>
@@ Line 51: / Line 37: @@
 ==== 1682_VSS_3_25_15_Map_for_1250 ====
-| {{:techtalk:ref:engctl:tc88maps:1682_vss_3_25_15_map_for_1250:1682_vss_3_25_15_map_for_1250-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:1682_vss_3_25_15_map_for_1250:1682_vss_3_25_15_map_for_1250.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:1682_vss_3_25_15_map_for_1250:1682_vss_3_25_15_map_for_1250-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:1682_vss_3_25_15_map_for_1250:1682_vss_3_25_15_map_for_1250.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:1682_vss_3_25_15_map_for_1250:1682_vss_3_25_15_map_for_1250-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:1682_vss_3_25_15_map_for_1250:1682_vss_3_25_15_map_for_1250-t.jpg?800|}} ||
 \\
@@ Line 60: / Line 46: @@
 ==== 883mapjakd ====
-| {{:techtalk:ref:engctl:tc88maps:883mapjakd:883mapjakd-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:883mapjakd:883mapjakd.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:883mapjakd:883mapjakd-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:883mapjakd:883mapjakd.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:883mapjakd:883mapjakd-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:883mapjakd:883mapjakd-t.jpg?800|}} ||
 \\
@@ Line 69: / Line 55: @@
 ==== Andrea-s_1250_Map-base ====
-| {{:techtalk:ref:engctl:tc88maps:Andrea-s_1250_Map-base:Andrea-s_1250_Map-base-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Andrea-s_1250_Map-base:Andrea-s_1250_Map-base.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:andrea-s_1250_map-base:andrea-s_1250_map-base-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:andrea-s_1250_map-base:andrea-s_1250_map-base.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Andrea-s_1250_Map-base:Andrea-s_1250_Map-base-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:andrea-s_1250_map-base:andrea-s_1250_map-base-t.jpg?800|}} ||
 \\
@@ Line 78: / Line 64: @@
 ==== basore_Map_for_1250 ====
-| {{:techtalk:ref:engctl:tc88maps:basore_Map_for_1250:basore_Map_for_1250-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:basore_Map_for_1250:basore_Map_for_1250.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:basore_map_for_1250:basore_map_for_1250-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:basore_map_for_1250:basore_map_for_1250.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:basore_Map_for_1250:basore_Map_for_1250-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:basore_map_for_1250:basore_map_for_1250-t.jpg?800|}} ||
 \\
@@ Line 87: / Line 73: @@
 ==== basore_Map_for_1250_2 ====
-| {{:techtalk:ref:engctl:tc88maps:basore_Map_for_1250_2:basore_Map_for_1250_2-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:basore_Map_for_1250_2:basore_Map_for_1250_2.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:basore_map_for_1250_2:basore_map_for_1250_2-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:basore_map_for_1250_2:basore_map_for_1250_2.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:basore_Map_for_1250_2:basore_Map_for_1250_2-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:basore_map_for_1250_2:basore_map_for_1250_2-t.jpg?800|}} ||
 \\
@@ Line 96: / Line 82: @@
 ==== Blue_Bitch_Table ====
-| {{:techtalk:ref:engctl:tc88maps:Blue_Bitch_Table:Blue_Bitch_Table-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Blue_Bitch_Table:Blue_Bitch_Table.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:blue_bitch_table:blue_bitch_table-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:blue_bitch_table:blue_bitch_table.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Blue_Bitch_Table:Blue_Bitch_Table-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:blue_bitch_table:blue_bitch_table-t.jpg?800|}} ||
 \\
@@ Line 105: / Line 91: @@
 ==== Greg_Map_2-0 ====
-| {{:techtalk:ref:engctl:tc88maps:greg_map_2-0:greg_map_2-0-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:greg_map_2-0:greg_map_2-0.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:greg_map_2-0:greg_map_2-0-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:greg_map_2-0:greg_map_2-0.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:greg_map_2-0:greg_map_2-0-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:greg_map_2-0:greg_map_2-0-t.jpg?800|}} ||
 \\
@@ Line 114: / Line 100: @@
 ==== Hybrid_2-0 ====
-| {{:techtalk:ref:engctl:tc88maps:hybrid_2-0:hybrid_2-0-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:hybrid_2-0:hybrid_2-0.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:hybrid_2-0:hybrid_2-0-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:hybrid_2-0:hybrid_2-0.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:hybrid_2-0:hybrid_2-0-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:hybrid_2-0:hybrid_2-0-t.jpg?800|}} ||
 \\
@@ Line 123: / Line 109: @@
 ==== Hybrid_2-0_883_Version ====
-| {{:techtalk:ref:engctl:tc88maps:Hybrid_2-0_883_Version:Hybrid_2-0_883_Version-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Hybrid_2-0_883_Version:Hybrid_2-0_883_Version.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:hybrid_2-0_883_version:hybrid_2-0_883_version-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:hybrid_2-0_883_version:hybrid_2-0_883_version.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Hybrid_2-0_883_Version:Hybrid_2-0_883_Version-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:hybrid_2-0_883_version:hybrid_2-0_883_version-t.jpg?800|}} ||
 \\
@@ Line 132: / Line 118: @@
 ==== jak_2 ====
-| {{:techtalk:ref:engctl:tc88maps:jak_2:jak_2-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:jak_2:jak_2.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:jak_2:jak_2-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:jak_2:jak_2.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:jak_2:jak_2-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:jak_2:jak_2-t.jpg?800|}} ||
 \\
@@ Line 141: / Line 127: @@
 ==== jak_3 ====
-| {{:techtalk:ref:engctl:tc88maps:jak_3:jak_3-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:jak_3:jak_3.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:jak_3:jak_3-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:jak_3:jak_3.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:jak_3:jak_3-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:jak_3:jak_3-t.jpg?800|}} ||
 \\
@@ Line 150: / Line 136: @@
 ==== jak_10-5 ====
-| {{:techtalk:ref:engctl:tc88maps:jak_10-5:jak_10-5-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:jak_10-5:jak_10-5.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:jak_10-5:jak_10-5-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:jak_10-5:jak_10-5.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:jak_10-5:jak_10-5-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:jak_10-5:jak_10-5-t.jpg?800|}} ||
 \\
@@ Line 159: / Line 145: @@
 ==== Jester_Delta ====
-| {{:techtalk:ref:engctl:tc88maps:Jester_Delta:Jester_Delta-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Jester_Delta:Jester_Delta.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:jester_delta:jester_delta-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:jester_delta:jester_delta.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Jester_Delta:Jester_Delta-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:jester_delta:jester_delta-t.jpg?800|}} ||
 \\
@@ Line 168: / Line 154: @@
 ==== Jester_Motorwerkz_88-90_Inch_Map_Generic_Mod_1 ====
-| {{:techtalk:ref:engctl:tc88maps:Jester_Motorwerkz_88-90_Inch_Map_Generic_Mod_1:Jester_Motorwerkz_88-90_Inch_Map_Generic_Mod_1-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Jester_Motorwerkz_88-90_Inch_Map_Generic_Mod_1:Jester_Motorwerkz_88-90_Inch_Map_Generic_Mod_1.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:jester_motorwerkz_88-90_inch_map_generic_mod_1:jester_motorwerkz_88-90_inch_map_generic_mod_1-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:jester_motorwerkz_88-90_inch_map_generic_mod_1:jester_motorwerkz_88-90_inch_map_generic_mod_1.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Jester_Motorwerkz_88-90_Inch_Map_Generic_Mod_1:Jester_Motorwerkz_88-90_Inch_Map_Generic_Mod_1-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:jester_motorwerkz_88-90_inch_map_generic_mod_1:jester_motorwerkz_88-90_inch_map_generic_mod_1-t.jpg?800|}} ||
 \\
@@ Line 177: / Line 163: @@
 ==== Jester_Motorwerkz_88-90_Inch_Map_Generic_VSS_05_1200 ====
-| {{:techtalk:ref:engctl:tc88maps:Jester_Motorwerkz_88-90_Inch_Map_Generic_VSS_05_1200:Jester_Motorwerkz_88-90_Inch_Map_Generic_VSS_05_1200-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Jester_Motorwerkz_88-90_Inch_Map_Generic_VSS_05_1200:Jester_Motorwerkz_88-90_Inch_Map_Generic_VSS_05_1200.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:jester_motorwerkz_88-90_inch_map_generic_vss_05_1200:jester_motorwerkz_88-90_inch_map_generic_vss_05_1200-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:jester_motorwerkz_88-90_inch_map_generic_vss_05_1200:jester_motorwerkz_88-90_inch_map_generic_vss_05_1200.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Jester_Motorwerkz_88-90_Inch_Map_Generic_VSS_05_1200:Jester_Motorwerkz_88-90_Inch_Map_Generic_VSS_05_1200-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:jester_motorwerkz_88-90_inch_map_generic_vss_05_1200:jester_motorwerkz_88-90_inch_map_generic_vss_05_1200-t.jpg?800|}} ||
 \\
@@ Line 186: / Line 172: @@
 ==== Jester_Motorwerkz_Moscow_Map ====
-| {{:techtalk:ref:engctl:tc88maps:Jester_Motorwerkz_Moscow_Map:Jester_Motorwerkz_Moscow_Map-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Jester_Motorwerkz_Moscow_Map:Jester_Motorwerkz_Moscow_Map.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:jester_motorwerkz_moscow_map:jester_motorwerkz_moscow_map-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:jester_motorwerkz_moscow_map:jester_motorwerkz_moscow_map.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Jester_Motorwerkz_Moscow_Map:Jester_Motorwerkz_Moscow_Map-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:jester_motorwerkz_moscow_map:jester_motorwerkz_moscow_map-t.jpg?800|}} ||
 \\
@@ Line 195: / Line 181: @@
 ==== Jester_Motorwerkz_Rocketman_01-15_Map ====
-| {{:techtalk:ref:engctl:tc88maps:Jester_Motorwerkz_Rocketman_01-15_Map:Jester_Motorwerkz_Rocketman_01-15_Map-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Jester_Motorwerkz_Rocketman_01-15_Map:Jester_Motorwerkz_Rocketman_01-15_Map.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:jester_motorwerkz_rocketman_01-15_map:jester_motorwerkz_rocketman_01-15_map-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:jester_motorwerkz_rocketman_01-15_map:jester_motorwerkz_rocketman_01-15_map.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Jester_Motorwerkz_Rocketman_01-15_Map:Jester_Motorwerkz_Rocketman_01-15_Map-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:jester_motorwerkz_rocketman_01-15_map:jester_motorwerkz_rocketman_01-15_map-t.jpg?800|}} ||
 \\
@@ Line 204: / Line 190: @@
 ==== Jester_Motorwerkz_Rocketman_03-15_Map ====
-| {{:techtalk:ref:engctl:tc88maps:Jester_Motorwerkz_Rocketman_03-15_Map:Jester_Motorwerkz_Rocketman_03-15_Map-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Jester_Motorwerkz_Rocketman_03-15_Map:Jester_Motorwerkz_Rocketman_03-15_Map.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:jester_motorwerkz_rocketman_03-15_map:jester_motorwerkz_rocketman_03-15_map-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:jester_motorwerkz_rocketman_03-15_map:jester_motorwerkz_rocketman_03-15_map.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Jester_Motorwerkz_Rocketman_03-15_Map:Jester_Motorwerkz_Rocketman_03-15_Map-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:jester_motorwerkz_rocketman_03-15_map:jester_motorwerkz_rocketman_03-15_map-t.jpg?800|}} ||
 \\
@@ Line 213: / Line 199: @@
 ==== Jester_Motorwerkz_Rocketman_04-15_Map ====
-| {{:techtalk:ref:engctl:tc88maps:Jester_Motorwerkz_Rocketman_04-15_Map:Jester_Motorwerkz_Rocketman_04-15_Map-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Jester_Motorwerkz_Rocketman_04-15_Map:Jester_Motorwerkz_Rocketman_04-15_Map.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:jester_motorwerkz_rocketman_04-15_map:jester_motorwerkz_rocketman_04-15_map-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:jester_motorwerkz_rocketman_04-15_map:jester_motorwerkz_rocketman_04-15_map.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Jester_Motorwerkz_Rocketman_04-15_Map:Jester_Motorwerkz_Rocketman_04-15_Map-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:jester_motorwerkz_rocketman_04-15_map:jester_motorwerkz_rocketman_04-15_map-t.jpg?800|}} ||
 \\
@@ Line 222: / Line 208: @@
 ==== Jester_Motorwerkz_Rocketman_04-28-2015_Map ====
-| {{:techtalk:ref:engctl:tc88maps:Jester_Motorwerkz_Rocketman_04-28-2015_Map:Jester_Motorwerkz_Rocketman_04-28-2015_Map-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Jester_Motorwerkz_Rocketman_04-28-2015_Map:Jester_Motorwerkz_Rocketman_04-28-2015_Map.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:jester_motorwerkz_rocketman_04-28-2015_map:jester_motorwerkz_rocketman_04-28-2015_map-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:jester_motorwerkz_rocketman_04-28-2015_map:jester_motorwerkz_rocketman_04-28-2015_map.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Jester_Motorwerkz_Rocketman_04-28-2015_Map:Jester_Motorwerkz_Rocketman_04-28-2015_Map-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:jester_motorwerkz_rocketman_04-28-2015_map:jester_motorwerkz_rocketman_04-28-2015_map-t.jpg?800|}} ||
 \\
@@ Line 231: / Line 217: @@
 ==== Jester_Motorwerkz_Rocketman_05-15_Map ====
-| {{:techtalk:ref:engctl:tc88maps:Jester_Motorwerkz_Rocketman_05-15_Map:Jester_Motorwerkz_Rocketman_05-15_Map-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Jester_Motorwerkz_Rocketman_05-15_Map:Jester_Motorwerkz_Rocketman_05-15_Map.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:jester_motorwerkz_rocketman_05-15_map:jester_motorwerkz_rocketman_05-15_map-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:jester_motorwerkz_rocketman_05-15_map:jester_motorwerkz_rocketman_05-15_map.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Jester_Motorwerkz_Rocketman_05-15_Map:Jester_Motorwerkz_Rocketman_05-15_Map-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:jester_motorwerkz_rocketman_05-15_map:jester_motorwerkz_rocketman_05-15_map-t.jpg?800|}} ||
 \\
@@ Line 240: / Line 226: @@
 ==== Jester_Motorwerkz_Rocketman_12-14_Map ====
-| {{:techtalk:ref:engctl:tc88maps:Jester_Motorwerkz_Rocketman_12-14_Map:Jester_Motorwerkz_Rocketman_12-14_Map-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Jester_Motorwerkz_Rocketman_12-14_Map:Jester_Motorwerkz_Rocketman_12-14_Map.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:jester_motorwerkz_rocketman_12-14_map:jester_motorwerkz_rocketman_12-14_map-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:jester_motorwerkz_rocketman_12-14_map:jester_motorwerkz_rocketman_12-14_map.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Jester_Motorwerkz_Rocketman_12-14_Map:Jester_Motorwerkz_Rocketman_12-14_Map-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:jester_motorwerkz_rocketman_12-14_map:jester_motorwerkz_rocketman_12-14_map-t.jpg?800|}} ||
 \\
@@ Line 249: / Line 235: @@
 ==== Jester_Motorwerkz_Scarecrow_Map ====
-| {{:techtalk:ref:engctl:tc88maps:Jester_Motorwerkz_Scarecrow_Map:Jester_Motorwerkz_Scarecrow_Map-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Jester_Motorwerkz_Scarecrow_Map:Jester_Motorwerkz_Scarecrow_Map.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:jester_motorwerkz_scarecrow_map:jester_motorwerkz_scarecrow_map-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:jester_motorwerkz_scarecrow_map:jester_motorwerkz_scarecrow_map.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Jester_Motorwerkz_Scarecrow_Map:Jester_Motorwerkz_Scarecrow_Map-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:jester_motorwerkz_scarecrow_map:jester_motorwerkz_scarecrow_map-t.jpg?800|}} ||
 \\
@@ Line 258: / Line 244: @@
 ==== Lenster_Rico_Hybrid_Map ====
-| {{:techtalk:ref:engctl:tc88maps:Lenster_Rico_Hybrid_Map:Lenster_Rico_Hybrid_Map-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Lenster_Rico_Hybrid_Map:Lenster_Rico_Hybrid_Map.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:lenster_rico_hybrid_map:lenster_rico_hybrid_map-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:lenster_rico_hybrid_map:lenster_rico_hybrid_map.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Lenster_Rico_Hybrid_Map:Lenster_Rico_Hybrid_Map-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:lenster_rico_hybrid_map:lenster_rico_hybrid_map-t.jpg?800|}} ||
 \\
@@ Line 267: / Line 253: @@
 ==== Lenster-s_Map ====
-| {{:techtalk:ref:engctl:tc88maps:Lenster-s_Map:Lenster-s_Map-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Lenster-s_Map:Lenster-s_Map.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:lenster-s_map:lenster-s_map-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:lenster-s_map:lenster-s_map.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Lenster-s_Map:Lenster-s_Map-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:lenster-s_map:lenster-s_map-t.jpg?800|}} ||
 \\
@@ Line 276: / Line 262: @@
 ==== MAP_Modified_33 ====
-| {{:techtalk:ref:engctl:tc88maps:MAP_Modified_33:MAP_Modified_33-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:MAP_Modified_33:MAP_Modified_33.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:map_modified_33:map_modified_33-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:map_modified_33:map_modified_33.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:MAP_Modified_33:MAP_Modified_33-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:map_modified_33:map_modified_33-t.jpg?800|}} ||
 \\
@@ Line 285: / Line 271: @@
 ==== MAP_Modified_35_Revised ====
-| {{:techtalk:ref:engctl:tc88maps:MAP_Modified_35_Revised:MAP_Modified_35_Revised-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:MAP_Modified_35_Revised:MAP_Modified_35_Revised.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:map_modified_35_revised:map_modified_35_revised-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:map_modified_35_revised:map_modified_35_revised.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:MAP_Modified_35_Revised:MAP_Modified_35_Revised-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:map_modified_35_revised:map_modified_35_revised-t.jpg?800|}} ||
 \\
@@ Line 294: / Line 280: @@
 ==== Necromancer_883_convert ====
-| {{:techtalk:ref:engctl:tc88maps:Necromancer_883_convert:Necromancer_883_convert-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Necromancer_883_convert:Necromancer_883_convert.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:necromancer_883_convert:necromancer_883_convert-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:necromancer_883_convert:necromancer_883_convert.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Necromancer_883_convert:Necromancer_883_convert-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:necromancer_883_convert:necromancer_883_convert-t.jpg?800|}} ||
 \\
@@ Line 303: / Line 289: @@
 ==== R-D_Map_0 ====
-| {{:techtalk:ref:engctl:tc88maps:R-D_Map_0:R-D_Map_0-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:R-D_Map_0:R-D_Map_0.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:r-d_map_0:r-d_map_0-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:r-d_map_0:r-d_map_0.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:R-D_Map_0:R-D_Map_0-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:r-d_map_0:r-d_map_0-t.jpg?800|}} ||
 \\
@@ Line 312: / Line 298: @@
 ==== R-D_Map_1 ====
-| {{:techtalk:ref:engctl:tc88maps:R-D_Map_1:R-D_Map_1-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:R-D_Map_1:R-D_Map_1.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:r-d_map_1:r-d_map_1-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:r-d_map_1:r-d_map_1.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:R-D_Map_1:R-D_Map_1-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:r-d_map_1:r-d_map_1-t.jpg?800|}} ||
 \\
@@ Line 321: / Line 307: @@
 ==== R-D_Map_2 ====
-| {{:techtalk:ref:engctl:tc88maps:R-D_Map_2:R-D_Map_2-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:R-D_Map_2:R-D_Map_2.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:r-d_map_2:r-d_map_2-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:r-d_map_2:r-d_map_2.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:R-D_Map_2:R-D_Map_2-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:r-d_map_2:r-d_map_2-t.jpg?800|}} ||
 \\
@@ Line 329: / Line 315: @@
 ==== Rico-s_1212_1-1_1200_Gearing ====
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_1212_1-1_1200_Gearing:Rico-s_1212_1-1_1200_Gearing-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Rico-s_1212_1-1_1200_Gearing:Rico-s_1212_1-1_1200_Gearing.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_1212_1-1_1200_gearing:rico-s_1212_1-1_1200_gearing-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rico-s_1212_1-1_1200_gearing:rico-s_1212_1-1_1200_gearing.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_1212_1-1_1200_Gearing:Rico-s_1212_1-1_1200_Gearing-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_1212_1-1_1200_gearing:rico-s_1212_1-1_1200_gearing-t.jpg?800|}} ||
 \\
@@ Line 337: / Line 323: @@
 ==== Rico-s_1212_1-1_883_gearing ====
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_1212_1-1_883_gearing:Rico-s_1212_1-1_883_gearing-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Rico-s_1212_1-1_883_gearing:Rico-s_1212_1-1_883_gearing.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_1212_1-1_883_gearing:rico-s_1212_1-1_883_gearing-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rico-s_1212_1-1_883_gearing:rico-s_1212_1-1_883_gearing.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_1212_1-1_883_gearing:Rico-s_1212_1-1_883_gearing-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_1212_1-1_883_gearing:rico-s_1212_1-1_883_gearing-t.jpg?800|}} ||
 \\
@@ Line 346: / Line 332: @@
 ==== Rico-s_1250_Base_Map_1200_Gearing ====
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_1250_Base_Map_1200_Gearing:Rico-s_1250_Base_Map_1200_Gearing-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Rico-s_1250_Base_Map_1200_Gearing:Rico-s_1250_Base_Map_1200_Gearing.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_1250_base_map_1200_gearing:rico-s_1250_base_map_1200_gearing-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rico-s_1250_base_map_1200_gearing:rico-s_1250_base_map_1200_gearing.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_1250_Base_Map_1200_Gearing:Rico-s_1250_Base_Map_1200_Gearing-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_1250_base_map_1200_gearing:rico-s_1250_base_map_1200_gearing-t.jpg?800|}} ||
 \\
@@ Line 355: / Line 341: @@
 ==== Rico-s_1250_Base_Map_883_Gearing ====
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_1250_Base_Map_883_Gearing:Rico-s_1250_Base_Map_883_Gearing-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Rico-s_1250_Base_Map_883_Gearing:Rico-s_1250_Base_Map_883_Gearing.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_1250_base_map_883_gearing:rico-s_1250_base_map_883_gearing-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rico-s_1250_base_map_883_gearing:rico-s_1250_base_map_883_gearing.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_1250_Base_Map_883_Gearing:Rico-s_1250_Base_Map_883_Gearing-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_1250_base_map_883_gearing:rico-s_1250_base_map_883_gearing-t.jpg?800|}} ||
 \\
@@ Line 364: / Line 350: @@
 ==== Rico-s_1250_Map_4-1_1200_Gearing ====
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_1250_Map_4-1_1200_Gearing:Rico-s_1250_Map_4-1_1200_Gearing-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Rico-s_1250_Map_4-1_1200_Gearing:Rico-s_1250_Map_4-1_1200_Gearing.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_1250_map_4-1_1200_gearing:rico-s_1250_map_4-1_1200_gearing-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rico-s_1250_map_4-1_1200_gearing:rico-s_1250_map_4-1_1200_gearing.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_1250_Map_4-1_1200_Gearing:Rico-s_1250_Map_4-1_1200_Gearing-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_1250_map_4-1_1200_gearing:rico-s_1250_map_4-1_1200_gearing-t.jpg?800|}} ||
 \\
@@ Line 373: / Line 359: @@
 ==== Rico-s_1250_Map_4-1_883_Gearing ====
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_1250_Map_4-1_883_Gearing:Rico-s_1250_Map_4-1_883_Gearing-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Rico-s_1250_Map_4-1_883_Gearing:Rico-s_1250_Map_4-1_883_Gearing.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_1250_map_4-1_883_gearing:rico-s_1250_map_4-1_883_gearing-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rico-s_1250_map_4-1_883_gearing:rico-s_1250_map_4-1_883_gearing.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_1250_Map_4-1_883_Gearing:Rico-s_1250_Map_4-1_883_Gearing-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_1250_map_4-1_883_gearing:rico-s_1250_map_4-1_883_gearing-t.jpg?800|}} ||
 \\
@@ Line 382: / Line 368: @@
 ==== Rico-s_1250_Map_Smackie_Version ====
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_1250_Map_Smackie_Version:Rico-s_1250_Map_Smackie_Version-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Rico-s_1250_Map_Smackie_Version:Rico-s_1250_Map_Smackie_Version.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_1250_map_smackie_version:rico-s_1250_map_smackie_version-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rico-s_1250_map_smackie_version:rico-s_1250_map_smackie_version.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_1250_Map_Smackie_Version:Rico-s_1250_Map_Smackie_Version-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_1250_map_smackie_version:rico-s_1250_map_smackie_version-t.jpg?800|}} ||
 \\
@@ Line 391: / Line 377: @@
 ==== Rico-s_1250_Map_Version4-0_883_Gearing ====
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_1250_Map_Version4-0_883_Gearing:Rico-s_1250_Map_Version4-0_883_Gearing-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Rico-s_1250_Map_Version4-0_883_Gearing:Rico-s_1250_Map_Version4-0_883_Gearing.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_1250_map_version4-0_883_gearing:rico-s_1250_map_version4-0_883_gearing-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rico-s_1250_map_version4-0_883_gearing:rico-s_1250_map_version4-0_883_gearing.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_1250_Map_Version4-0_883_Gearing:Rico-s_1250_Map_Version4-0_883_Gearing-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_1250_map_version4-0_883_gearing:rico-s_1250_map_version4-0_883_gearing-t.jpg?800|}} ||
 \\
@@ Line 400: / Line 386: @@
 ==== Rico-s_221_Map ====
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_221_Map:Rico-s_221_Map-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Rico-s_221_Map:Rico-s_221_Map.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_221_map:rico-s_221_map-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rico-s_221_map:rico-s_221_map.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_221_Map:Rico-s_221_Map-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_221_map:rico-s_221_map-t.jpg?800|}} ||
 \\
@@ Line 409: / Line 395: @@
 ==== Rico-s_88inch_Map_1-0 ====
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_88inch_Map_1-0:Rico-s_88inch_Map_1-0-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Rico-s_88inch_Map_1-0:Rico-s_88inch_Map_1-0.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_88inch_map_1-0:rico-s_88inch_map_1-0-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rico-s_88inch_map_1-0:rico-s_88inch_map_1-0.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_88inch_Map_1-0:Rico-s_88inch_Map_1-0-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_88inch_map_1-0:rico-s_88inch_map_1-0-t.jpg?800|}} ||
 \\
@@ Line 418: / Line 404: @@
 ==== Rico-s_88inch_Map_1-1 ====
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_88inch_Map_1-1:Rico-s_88inch_Map_1-1-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Rico-s_88inch_Map_1-1:Rico-s_88inch_Map_1-1.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_88inch_map_1-1:rico-s_88inch_map_1-1-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rico-s_88inch_map_1-1:rico-s_88inch_map_1-1.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_88inch_Map_1-1:Rico-s_88inch_Map_1-1-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_88inch_map_1-1:rico-s_88inch_map_1-1-t.jpg?800|}} ||
 \\
@@ Line 427: / Line 413: @@
 ==== Rico-s_Hybrid_2-1 ====
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_Hybrid_2-1:Rico-s_Hybrid_2-1-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Rico-s_Hybrid_2-1:Rico-s_Hybrid_2-1.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_hybrid_2-1:rico-s_hybrid_2-1-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rico-s_hybrid_2-1:rico-s_hybrid_2-1.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_Hybrid_2-1:Rico-s_Hybrid_2-1-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_hybrid_2-1:rico-s_hybrid_2-1-t.jpg?800|}} ||
 \\
@@ Line 436: / Line 422: @@
 ==== Rico-s_Hybrid_2-2 ====
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_Hybrid_2-2:Rico-s_Hybrid_2-2-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Rico-s_Hybrid_2-2:Rico-s_Hybrid_2-2.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_hybrid_2-2:rico-s_hybrid_2-2-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rico-s_hybrid_2-2:rico-s_hybrid_2-2.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_Hybrid_2-2:Rico-s_Hybrid_2-2-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_hybrid_2-2:rico-s_hybrid_2-2-t.jpg?800|}} ||
 \\
@@ Line 445: / Line 431: @@
 ==== Rico-s_Hybrid_2-2_883 ====
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_Hybrid_2-2_883:Rico-s_Hybrid_2-2_883-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Rico-s_Hybrid_2-2_883:Rico-s_Hybrid_2-2_883.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_hybrid_2-2_883:rico-s_hybrid_2-2_883-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rico-s_hybrid_2-2_883:rico-s_hybrid_2-2_883.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_Hybrid_2-2_883:Rico-s_Hybrid_2-2_883-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_hybrid_2-2_883:rico-s_hybrid_2-2_883-t.jpg?800|}} ||
 \\
@@ Line 454: / Line 440: @@
 ==== Rico-s_Jester_8_Ball_Capo_Map_06_1200_0 ====
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_Jester_8_Ball_Capo_Map_06_1200_0:Rico-s_Jester_8_Ball_Capo_Map_06_1200_0-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Rico-s_Jester_8_Ball_Capo_Map_06_1200_0:Rico-s_Jester_8_Ball_Capo_Map_06_1200_0.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_8_ball_capo_map_06_1200_0:rico-s_jester_8_ball_capo_map_06_1200_0-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_8_ball_capo_map_06_1200_0:rico-s_jester_8_ball_capo_map_06_1200_0.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_Jester_8_Ball_Capo_Map_06_1200_0:Rico-s_Jester_8_Ball_Capo_Map_06_1200_0-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_8_ball_capo_map_06_1200_0:rico-s_jester_8_ball_capo_map_06_1200_0-t.jpg?800|}} ||
 \\
@@ Line 463: / Line 449: @@
 ==== Rico-s_Jester_8_Ball_Capo_Map_06_1200_1 ====
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_Jester_8_Ball_Capo_Map_06_1200_1:Rico-s_Jester_8_Ball_Capo_Map_06_1200_1-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Rico-s_Jester_8_Ball_Capo_Map_06_1200_1:Rico-s_Jester_8_Ball_Capo_Map_06_1200_1.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_8_ball_capo_map_06_1200_1:rico-s_jester_8_ball_capo_map_06_1200_1-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_8_ball_capo_map_06_1200_1:rico-s_jester_8_ball_capo_map_06_1200_1.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_Jester_8_Ball_Capo_Map_06_1200_1:Rico-s_Jester_8_Ball_Capo_Map_06_1200_1-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_8_ball_capo_map_06_1200_1:rico-s_jester_8_ball_capo_map_06_1200_1-t.jpg?800|}} ||
 \\
@@ Line 472: / Line 458: @@
 ==== Rico-s_Jester_III_Map_Wedge_Mod ====
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_Jester_III_Map_Wedge_Mod:Rico-s_Jester_III_Map_Wedge_Mod-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Rico-s_Jester_III_Map_Wedge_Mod:Rico-s_Jester_III_Map_Wedge_Mod.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_iii_map_wedge_mod:rico-s_jester_iii_map_wedge_mod-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_iii_map_wedge_mod:rico-s_jester_iii_map_wedge_mod.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_Jester_III_Map_Wedge_Mod:Rico-s_Jester_III_Map_Wedge_Mod-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_iii_map_wedge_mod:rico-s_jester_iii_map_wedge_mod-t.jpg?800|}} ||
 \\
@@ Line 481: / Line 467: @@
 ==== Rico-s_Jester_III_Map_Wedge_Mod_1 ====
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_Jester_III_Map_Wedge_Mod_1:Rico-s_Jester_III_Map_Wedge_Mod_1-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Rico-s_Jester_III_Map_Wedge_Mod_1:Rico-s_Jester_III_Map_Wedge_Mod_1.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_iii_map_wedge_mod_1:rico-s_jester_iii_map_wedge_mod_1-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_iii_map_wedge_mod_1:rico-s_jester_iii_map_wedge_mod_1.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_Jester_III_Map_Wedge_Mod_1:Rico-s_Jester_III_Map_Wedge_Mod_1-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_iii_map_wedge_mod_1:rico-s_jester_iii_map_wedge_mod_1-t.jpg?800|}} ||
 \\
@@ Line 490: / Line 476: @@
 ==== Rico-s_Jester_III_Map_Wedge_Mod_2 ====
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_Jester_III_Map_Wedge_Mod_2:Rico-s_Jester_III_Map_Wedge_Mod_2-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Rico-s_Jester_III_Map_Wedge_Mod_2:Rico-s_Jester_III_Map_Wedge_Mod_2.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_iii_map_wedge_mod_2:rico-s_jester_iii_map_wedge_mod_2-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_iii_map_wedge_mod_2:rico-s_jester_iii_map_wedge_mod_2.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_Jester_III_Map_Wedge_Mod_2:Rico-s_Jester_III_Map_Wedge_Mod_2-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_iii_map_wedge_mod_2:rico-s_jester_iii_map_wedge_mod_2-t.jpg?800|}} ||
 \\
@@ Line 499: / Line 485: @@
 ==== Rico-s_Jester_IV_Map ====
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_Jester_IV_Map:Rico-s_Jester_IV_Map-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Rico-s_Jester_IV_Map:Rico-s_Jester_IV_Map.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_iv_map:rico-s_jester_iv_map-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_iv_map:rico-s_jester_iv_map.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_Jester_IV_Map:Rico-s_Jester_IV_Map-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_iv_map:rico-s_jester_iv_map-t.jpg?800|}} ||
 \\
@@ Line 508: / Line 494: @@
 ==== Rico-s_Jester_IV_Map_06_1200_0 ====
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_Jester_IV_Map_06_1200_0:Rico-s_Jester_IV_Map_06_1200_0-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Rico-s_Jester_IV_Map_06_1200_0:Rico-s_Jester_IV_Map_06_1200_0.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_iv_map_06_1200_0:rico-s_jester_iv_map_06_1200_0-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_iv_map_06_1200_0:rico-s_jester_iv_map_06_1200_0.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_Jester_IV_Map_06_1200_0:Rico-s_Jester_IV_Map_06_1200_0-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_iv_map_06_1200_0:rico-s_jester_iv_map_06_1200_0-t.jpg?800|}} ||
 \\
@@ Line 517: / Line 503: @@
 ==== Rico-s_Jester_IV_Map_06_1200_1 ====
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_Jester_IV_Map_06_1200_1:Rico-s_Jester_IV_Map_06_1200_1-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Rico-s_Jester_IV_Map_06_1200_1:Rico-s_Jester_IV_Map_06_1200_1.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_iv_map_06_1200_1:rico-s_jester_iv_map_06_1200_1-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_iv_map_06_1200_1:rico-s_jester_iv_map_06_1200_1.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_Jester_IV_Map_06_1200_1:Rico-s_Jester_IV_Map_06_1200_1-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_iv_map_06_1200_1:rico-s_jester_iv_map_06_1200_1-t.jpg?800|}} ||
 \\
@@ Line 526: / Line 512: @@
 ==== Rico-s_Jester_IV_Map_VSS_1475 ====
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_Jester_IV_Map_VSS_1475:Rico-s_Jester_IV_Map_VSS_1475-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ :techtalk:ref:engctl:tc88maps:Rico-s_Jester_IV_Map_VSS_1475:Rico-s_Jester_IV_Map_VSS_1475.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_iv_map_vss_1475:rico-s_jester_iv_map_vss_1475-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_iv_map_vss_1475:rico-s_jester_iv_map_vss_1475.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
-| {{:techtalk:ref:engctl:tc88maps:Rico-s_Jester_IV_Map_VSS_1475:Rico-s_Jester_IV_Map_VSS_1475-t.jpg?800|}} ||
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_iv_map_vss_1475:rico-s_jester_iv_map_vss_1475-t.jpg?800|}} ||
 \\
@@ Line 533: / Line 519: @@
+==== Rico-s_Jester_Motorwerkz_ Map_for_Andrea_06_883_Gearing ====
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_motorwerkz_map_for_andrea_06_883_gearing:rico-s_jester_motorwerkz_map_for_andrea_06_883_gearing-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_motorwerkz_map_for_andrea_06_883_gearing:rico-s_jester_motorwerkz_map_for_andrea_06_883_gearing.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_motorwerkz_map_for_andrea_06_883_gearing:rico-s_jester_motorwerkz_map_for_andrea_06_883_gearing-t.jpg?800|}} ||
+\\
+\\
+==== Rico-s_Jester_V_Map_04-05_1200 ====
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_v_map_04-05_1200:rico-s_jester_v_map_04-05_1200-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_v_map_04-05_1200:rico-s_jester_v_map_04-05_1200.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_v_map_04-05_1200:rico-s_jester_v_map_04-05_1200-t.jpg?800|}} ||
 \\
+\\
+==== Rico-s_Jester_V_Map_04-05_883 ====
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_v_map_04-05_883:rico-s_jester_v_map_04-05_883-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_v_map_04-05_883:rico-s_jester_v_map_04-05_883.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_v_map_04-05_883:rico-s_jester_v_map_04-05_883-t.jpg?800|}} ||
+\\
+\\
+==== Rico-s_Jester_VII_Map_VSS_04-05_883 ====
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_vii_map_vss_04-05_883:rico-s_jester_vii_map_vss_04-05_883-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_vii_map_vss_04-05_883:rico-s_jester_vii_map_vss_04-05_883.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_vii_map_vss_04-05_883:rico-s_jester_vii_map_vss_04-05_883-t.jpg?800|}} ||
+\\
+\\
+==== Rico-s_Jester_VII_Map_VSS_06_883 ====
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_vii_map_vss_06_883:rico-s_jester_vii_map_vss_06_883-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_vii_map_vss_06_883:rico-s_jester_vii_map_vss_06_883.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_jester_vii_map_vss_06_883:rico-s_jester_vii_map_vss_06_883-t.jpg?800|}} ||
+\\
+\\
+==== Rico-s_King_Jester_Map_0 ====
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_king_jester_map_0:rico-s_king_jester_map_0-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rico-s_king_jester_map_0:rico-s_king_jester_map_0.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_king_jester_map_0:rico-s_king_jester_map_0-t.jpg?800|}} ||
+\\
+\\
+==== Rico-s_King_Jester_Map_1 ====
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_king_jester_map_1:rico-s_king_jester_map_1-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rico-s_king_jester_map_1:rico-s_king_jester_map_1.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_king_jester_map_1:rico-s_king_jester_map_1-t.jpg?800|}} ||
+\\
+\\
+==== Rico-s_Voodoo_Map_06_1200 ====
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_voodoo_map_06_1200:rico-s_voodoo_map_06_1200-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rico-s_voodoo_map_06_1200:rico-s_voodoo_map_06_1200.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rico-s_voodoo_map_06_1200:rico-s_voodoo_map_06_1200-t.jpg?800|}} ||
+\\
+\\
+==== RTM-Andrea_1250_Map_ base-1431_2 ====
+| {{techtalk:ref:engctl:tc88a-rico-maps:rtm-andrea_1250_map_base-1431_2:rtm-andrea_1250_map_base-1431_2-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rtm-andrea_1250_map_base-1431_2:rtm-andrea_1250_map_base-1431_2.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rtm-andrea_1250_map_base-1431_2:rtm-andrea_1250_map_base-1431_2-t.jpg?800|}} ||
+\\
+\\
+==== RTM-Andrea_1250_Map_AGGRESSIVE_Version_4-1 ====
+| {{techtalk:ref:engctl:tc88a-rico-maps:rtm-andrea_1250_map_aggressive_version_4-1:rtm-andrea_1250_map_aggressive_version_4-1-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rtm-andrea_1250_map_aggressive_version_4-1:rtm-andrea_1250_map_aggressive_version_4-1.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rtm-andrea_1250_map_aggressive_version_4-1:rtm-andrea_1250_map_aggressive_version_4-1-t.jpg?800|}} ||
+\\
+\\
+==== RTM-Andrea_1250_Map_AGGRESSIVE-1431_2_Rev-3 ====
+| {{techtalk:ref:engctl:tc88a-rico-maps:rtm-andrea_1250_map_aggressive-1431_2_rev-3:rtm-andrea_1250_map_aggressive-1431_2_rev-3-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rtm-andrea_1250_map_aggressive-1431_2_rev-3:rtm-andrea_1250_map_aggressive-1431_2_rev-3.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rtm-andrea_1250_map_aggressive-1431_2_rev-3:rtm-andrea_1250_map_aggressive-1431_2_rev-3-t.jpg?800|}} ||
+\\
+\\
+==== RTM-Andrea_1250_Map_Revised_aggressive ====
+| {{techtalk:ref:engctl:tc88a-rico-maps:rtm-andrea_1250_map_revised_aggressive:rtm-andrea_1250_map_revised_aggressive-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rtm-andrea_1250_map_revised_aggressive:rtm-andrea_1250_map_revised_aggressive.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rtm-andrea_1250_map_revised_aggressive:rtm-andrea_1250_map_revised_aggressive-t.jpg?800|}} ||
+\\
+\\
+==== RTM-Andrea_1250_Map_Revised-aggressive-VSS_1630 ====
+| {{techtalk:ref:engctl:tc88a-rico-maps:rtm-andrea_1250_map_revised-aggressive-vss_1630:rtm-andrea_1250_map_revised-aggressive-vss_1630-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rtm-andrea_1250_map_revised-aggressive-vss_1630:rtm-andrea_1250_map_revised-aggressive-vss_1630.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rtm-andrea_1250_map_revised-aggressive-vss_1630:rtm-andrea_1250_map_revised-aggressive-vss_1630-t.jpg?800|}} ||
+\\
+\\
+==== RTM-Andrea_1250_Map_Version_4-0_revised_ramp_from_0to45 ====
+| {{techtalk:ref:engctl:tc88a-rico-maps:rtm-andrea_1250_map_version_4-0_revised_ramp_from_0to45:rtm-andrea_1250_map_version_4-0_revised_ramp_from_0to45-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:rtm-andrea_1250_map_version_4-0_revised_ramp_from_0to45:rtm-andrea_1250_map_version_4-0_revised_ramp_from_0to45.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:rtm-andrea_1250_map_version_4-0_revised_ramp_from_0to45:rtm-andrea_1250_map_version_4-0_revised_ramp_from_0to45-t.jpg?800|}} ||
+\\
+\\
+==== Scarecrow_1682 ====
+| {{techtalk:ref:engctl:tc88a-rico-maps:scarecrow_1682:scarecrow_1682-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:scarecrow_1682:scarecrow_1682.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:scarecrow_1682:scarecrow_1682-t.jpg?800|}} ||
+\\
+\\
+==== SE_COPY_SORTA ====
+| {{techtalk:ref:engctl:tc88a-rico-maps:se_copy_sorta:se_copy_sorta-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:se_copy_sorta:se_copy_sorta.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:se_copy_sorta:se_copy_sorta-t.jpg?800|}} ||
+\\
+\\
+==== WEDGE_Mod_1682 ====
+| {{techtalk:ref:engctl:tc88a-rico-maps:wedge_mod_1682:wedge_mod_1682-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:wedge_mod_1682:wedge_mod_1682.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:wedge_mod_1682:wedge_mod_1682-t.jpg?800|}} ||
+\\
+\\
+==== WTF_Map_12-29-2014 ====
+| {{techtalk:ref:engctl:tc88a-rico-maps:wtf_map_12-29-2014:wtf_map_12-29-2014-m.jpg?400|}} | **Click on an image to see a larger scale version.**\\ **Click the following filename and download (save) it\\ to a convenient directory on your local computer.**\\ {{ techtalk:ref:engctl:tc88a-rico-maps:wtf_map_12-29-2014:wtf_map_12-29-2014.zip |}} \\ \\ **Next, UNZIP the file to obtain the Map Image '-m.jpg',\\ the Table Data '-t.jpg' and the usable '.tbl' data file.\\ \\ Then LOAD that '.tbl' data file into the Daytona Twin Tec\\ PC Link Software to map your ignition module.** |
+| {{techtalk:ref:engctl:tc88a-rico-maps:wtf_map_12-29-2014:wtf_map_12-29-2014-t.jpg?800|}} ||
+\\
+\\
+\\
+**Use your Browser BACK Button -or-**\\
+[[:techtalk:menu|{{:techtalk:gototechnicalmenu.jpg|}}]]

Trace:

Differences

Navigation

Search

Toolbox