Table of Contents
This is an old revision of the document!
REF: Engine Control50
Daytona Twin Tec TC88A Map Files - Aftermarket Ignition Maps
The TC88A Ignition Module is usable on the 2004-2006 carburetored models of the Sportsters. It replaces the stock Ignition Module.
The TC88A has dials on the module for selecting pre-programed ignition timing maps and choosing the level of the RPM Limiter. This is accomplished with two dials for timing maps and two dials for the RPM Limit.
One of the timing dials sets the Initial Timing while the second dial selects the Timing Advance Slope.
One of the RPM Limit dials chooses the x1000 value and the other selects the x100 value. If a setting is selected at 3000 or below, that is understood to mean NO RPM LIMITER will be active. BE CAREFUL!
In addition to the pre-programmed timing maps (selectable by the dials), the unit can be user-programmed to utilize customized timing advance maps. To use these customized maps, you must have a computer interface, such as the Daytona USB Interface (18014), and the Daytona PC-Link Software, to communicate with the TC88A unit. (see this XLForum Thread.)
Table Data Files - '.tbl'
The TC88A PC-Link Software will allow you to upload customized ignition timing files into the module. These filenames end with a '.tbl', indicating they are Table Files (such as Jester_Delta.tbl). These files are actually text files and the PC-Link Software will put that data into the memory of the TC88A to cause it to respond according to your customized settings.
Here's a sample of what data is actually contained in the '.tbl' files (this is taken from the Jester_Delta.tbl file) :
Sample 'Jester_Delta' Table Diagram shown in PC-Link when that file is loaded. Here, MAP is vertical & RPM is horizontal.
Rico05r/JesterMotorwerkz/Rocketmangb Ignition Maps
This section was created from files supplied by XLForum member, rocketmangb. Many were created by XLForum member, rico05r and left in the care of rocketmangb. To get them into the Sportsterpedia, help was provided by XLForum member, npaisnel, who created the image files and helped with file handling. Thank you very much to all involved.
Instructions for using the ZIPPED files:
1) Click the selected ZIP filename and download (save) it to a convenient directory on your local computer.
2) Then UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file.
3) Load that '.tbl' data file into the Daytona Twin Tec PC-Link Software to map your ignition module.
1682_VSS_3_25_15_Map_for_1250
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. 1682_vss_3_25_15_map_for_1250.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
883mapjakd
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. 883mapjakd.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Andrea-s_1250_Map-base
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. andrea-s_1250_map-base.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
basore_Map_for_1250
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. basore_map_for_1250.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
basore_Map_for_1250_2
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. basore_map_for_1250_2.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Blue_Bitch_Table
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. blue_bitch_table.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Greg_Map_2-0
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. greg_map_2-0.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Hybrid_2-0
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. hybrid_2-0.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Hybrid_2-0_883_Version
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. hybrid_2-0_883_version.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
jak_2
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. jak_2.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
jak_3
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. jak_3.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
jak_10-5
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. jak_10-5.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Jester_Delta
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. jester_delta.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Jester_Motorwerkz_88-90_Inch_Map_Generic_Mod_1
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. jester_motorwerkz_88-90_inch_map_generic_mod_1.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Jester_Motorwerkz_88-90_Inch_Map_Generic_VSS_05_1200
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. jester_motorwerkz_88-90_inch_map_generic_vss_05_1200.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Jester_Motorwerkz_Moscow_Map
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. jester_motorwerkz_moscow_map.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Jester_Motorwerkz_Rocketman_01-15_Map
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. jester_motorwerkz_rocketman_01-15_map.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Jester_Motorwerkz_Rocketman_03-15_Map
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. jester_motorwerkz_rocketman_03-15_map.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Jester_Motorwerkz_Rocketman_04-15_Map
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. jester_motorwerkz_rocketman_04-15_map.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Jester_Motorwerkz_Rocketman_04-28-2015_Map
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. jester_motorwerkz_rocketman_04-28-2015_map.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Jester_Motorwerkz_Rocketman_05-15_Map
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. jester_motorwerkz_rocketman_05-15_map.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Jester_Motorwerkz_Rocketman_12-14_Map
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. jester_motorwerkz_rocketman_12-14_map.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Jester_Motorwerkz_Scarecrow_Map
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. jester_motorwerkz_scarecrow_map.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Lenster_Rico_Hybrid_Map
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. lenster_rico_hybrid_map.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Lenster-s_Map
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. lenster-s_map.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
MAP_Modified_33
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. map_modified_33.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
MAP_Modified_35_Revised
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. map_modified_35_revised.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Necromancer_883_convert
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. necromancer_883_convert.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
R-D_Map_0
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. r-d_map_0.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
R-D_Map_1
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. r-d_map_1.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
R-D_Map_2
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. r-d_map_2.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Rico-s_1212_1-1_1200_Gearing
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. rico-s_1212_1-1_1200_gearing.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Rico-s_1212_1-1_883_gearing
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. rico-s_1212_1-1_883_gearing.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Rico-s_1250_Base_Map_1200_Gearing
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. rico-s_1250_base_map_1200_gearing.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Rico-s_1250_Base_Map_883_Gearing
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. rico-s_1250_base_map_883_gearing.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Rico-s_1250_Map_4-1_1200_Gearing
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. rico-s_1250_map_4-1_1200_gearing.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Rico-s_1250_Map_4-1_883_Gearing
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. rico-s_1250_map_4-1_883_gearing.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Rico-s_1250_Map_Smackie_Version
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. rico-s_1250_map_smackie_version.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Rico-s_1250_Map_Version4-0_883_Gearing
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. rico-s_1250_map_version4-0_883_gearing.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Rico-s_221_Map
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. rico-s_221_map.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Rico-s_88inch_Map_1-0
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. rico-s_88inch_map_1-0.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Rico-s_88inch_Map_1-1
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. rico-s_88inch_map_1-1.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Rico-s_Hybrid_2-1
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. rico-s_hybrid_2-1.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Rico-s_Hybrid_2-2
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. rico-s_hybrid_2-2.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Rico-s_Hybrid_2-2_883
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. rico-s_hybrid_2-2_883.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Rico-s_Jester_8_Ball_Capo_Map_06_1200_0
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. rico-s_jester_8_ball_capo_map_06_1200_0.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Rico-s_Jester_8_Ball_Capo_Map_06_1200_1
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. rico-s_jester_8_ball_capo_map_06_1200_1.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Rico-s_Jester_III_Map_Wedge_Mod
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. rico-s_jester_iii_map_wedge_mod.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Rico-s_Jester_III_Map_Wedge_Mod_1
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. rico-s_jester_iii_map_wedge_mod_1.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Rico-s_Jester_III_Map_Wedge_Mod_2
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. rico-s_jester_iii_map_wedge_mod_2.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Rico-s_Jester_IV_Map
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. rico-s_jester_iv_map.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Rico-s_Jester_IV_Map_06_1200_0
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. rico-s_jester_iv_map_06_1200_0.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Rico-s_Jester_IV_Map_06_1200_1
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. rico-s_jester_iv_map_06_1200_1.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|
Rico-s_Jester_IV_Map_VSS_1475
Click on an image to see a larger scale version. Click the following filename and download (save) it to a convenient directory on your local computer. rico-s_jester_iv_map_vss_1475.zip Next, UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file. Then LOAD that '.tbl' data file into the Daytona Twin Tec PC Link Software to map your ignition module. |
|