Table of Contents
This is an old revision of the document!
REF: Service Procedures 16
Hydraulic Lifter - Disassembly / Assembly
Now you can remove the clip. You can dump the lifter into a rag to keep from losing parts and the guts may fall out when turned upside down. | ||
Once the plunger is out, turn the body upside down and let it drain. Pull the plate out if you haven't already. | ||
This is the lifter's check valve (some have a plate and spring, others have a ball and spring). The cup pries off with a screwdriver. Careful not to lose the cup or the tiny spring under it. |
||