Table of Contents
This is an old revision of the document!
REF: Tools - 101
Gearcase / Cam Cover Tools
Cam / Gearcase Cover Removal
Alternatives
You can use an old points plate with a 1/2“X13 nut welded in the center to ease the cover off. Mount the plate inside the cover as you would normally and insert a 1/2”X13x3“ headless bolt in the center. Turn it in until the cover comes loose. This way the #2 cam stays in place so they don't all fall out when you remove the cover.
 |
| Cam Cover Removal Tool 1) |
|---|
1)
photo by dobermandave of the XLFORUM http://xlforum.net/forums/showthread.php?t=395586&page=5
