Differences

This shows you the differences between two versions of the page.

--- techtalk:evo:engmech09 [2019/12/01 16:11]
hippysmack [Pivot Shaft Pics]
+++ techtalk:evo:engmech09 [2019/12/17 00:00]
hippysmack [Loose / Broken Lock Plate Screws]
@@ Line 155: / Line 155: @@
 The isolators are not holding the screws in. They are just against them (shouldn't be much pressure if any against the screws). \\
 Most likely, only with severe deflection of that pivot pin would pressure be placed on the plate and shear the bolts. \\
+You can drill the center of the screw with a small drill bit and try and Easy-Out to remove it. \\
 |  Loose / broken lock plate screws. ((photo by Nytstr of the XLFORUM http://xlforum.net/forums/showthread.php?t=1313091))  |  The screws are hidden from the outside. ((photos by Cosmo Kramer of the XLFORUM http://xlforum.net/forums/showthread.php?t=1313091&page=2))  ||
 |{{:techtalk:evo:susp:rear_engine_mount_by_nytstr.jpg?direct&300|}}| {{:techtalk:evo:susp:07_rear_motor_mount_2_by_cosmo_kramer.jpg?direct&300|}}|{{:techtalk:evo:susp:07_rear_motor_mount_3_by_cosmo_kramer.jpg?direct&300|}}|
+{{:techtalk:evo:susp:broken_screw_removal_1_by_luxblue.jpg?direct&300|}} ((photo by LuxBlue of the XLFORUM)) {{:techtalk:evo:susp:broken_screw_removal_2_by_luxblue.jpg?direct&300|}} ((photo by LuxBlue of the XLFORUM)) {{:techtalk:evo:susp:broken_screw_removal_3_by_luxblue.jpg?direct&300|}} ((photo by LuxBlue of the XLFORUM))
 ==== Worn / Rusty Pivot Shaft ====