Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision | Next revision Both sides next revision | ||
techtalk:evo:oil01 [2019/06/22 16:38] hippysmack [Crankcase Pressure] |
techtalk:evo:oil01 [2019/06/22 16:47] hippysmack [Oil Pump Feed] |
||
---|---|---|---|
Line 129: | Line 129: | ||
* Then the oil pump feed gerotors send pressurized oil up through a cavity in the filter housing via an external hose to the oil filter. | * Then the oil pump feed gerotors send pressurized oil up through a cavity in the filter housing via an external hose to the oil filter. | ||
* The oil leaves the filter and is routed through a check ball and into the case feed galley. | * The oil leaves the filter and is routed through a check ball and into the case feed galley. | ||
+ | * 91-03 engines: | ||
+ | * From the feed galley, feed pressure is sent to the lifters and pinion bushing / shaft. | ||
+ | * A drilled passage also connects the feed galley down to squirt excess feed pressure to #2 cam gear. | ||
+ | * 04-Up engines: | ||
+ | * Additional, oil is fed from the feed galley (through a drilled passage) to the piston squirters. | ||
| 91-97 Oil Pump Oiling Paths ((photo by Hippysmack)) | 98 and Up Oil Pump Oiling Paths ((photo by bsaman of the XLFORUM http://xlforum.net/forums/showthread.php?t=691283&page=2)) | | | 91-97 Oil Pump Oiling Paths ((photo by Hippysmack)) | 98 and Up Oil Pump Oiling Paths ((photo by bsaman of the XLFORUM http://xlforum.net/forums/showthread.php?t=691283&page=2)) | |