Differences

This shows you the differences between two versions of the page.

--- techtalk:evo:oil03g [2018/02/22 02:45]
hippysmack [Comparing the 03-06 and the 07 Style Oil Pumps]
+++ techtalk:evo:oil03g [2018/02/22 03:25]
hippysmack [Comparing the 03-06 and the 07 Style Oil Pumps]
@@ Line 9: / Line 9: @@
   * The main feature with 07 and up pump is the larger scavenger gerotor action with wider teeth allowing to move more oil at the same speed from the sump.
   * Dimensions shown below are approximate. The 98 pump shown below is used with some probable wear. The intention is to show major differences in the two pump versions only.
+  * See also [[techtalk:evo:oil03f|Images of 07-later Buell Oil Pump - 26357-02B]] which is the same pump as the 07 XL pump but with different oil line fittings.
@@ Line 42: / Line 44: @@
 |{{:techtalk:evo:oil:98-07_oil_pump_comparison_20a1_by_hippysmack.jpg?direct&300|}}|{{:techtalk:evo:oil:98-07_oil_pump_comparison_20a2_by_hippysmack.jpg?direct&300|}}|{{:techtalk:evo:oil:98-07_oil_pump_comparison_20_by_hippysmack.jpg?direct&300|}}|
-|  98 inside scavenger gear ((photos by Hippysmack of the XLFORUM))  ||  98 and 07 inside scavenger gears  |
+|  98 inside scavenger gerotor ((photos by Hippysmack of the XLFORUM))  ||  98 and 07 inside scavenger gerotors ((photo by Hippysmack of the XLFORUM))  |
 |{{:techtalk:evo:oil:98-07_oil_pump_comparison_20b1_by_hippysmack.jpg?direct&300|}}|{{:techtalk:evo:oil:98-07_oil_pump_comparison_20b2_by_hippysmack.jpg?direct&300|}}|
-|  07 inside scavenger gear ((photos by Hippysmack of the XLFORUM))  ||
+|  07 inside scavenger gerotor ((photos by Hippysmack of the XLFORUM))  ||
   * The 07 outside scavenger gerotor is app. (.127") larger in dia. and app. (.150") taller. \\ The gear shaft was made longer for the taller body casting / gerotors and the scavenger gerotor sits closer to the bottom of the 07 pump.
 |{{:techtalk:evo:oil:98-07_oil_pump_comparison_21a1_by_hippysmack.jpg?direct&300|}}|{{:techtalk:evo:oil:98-07_oil_pump_comparison_21a2_by_hippysmack.jpg?direct&300|}}|{{:techtalk:evo:oil:98-07_oil_pump_comparison_21_by_hippysmack.jpg?direct&300|}}|
-||||
+|  98 outside scavenger gerotor ((photos by Hippysmack of the XLFORUM))  ||  98 and 07 outside scavenger gerotors ((photo by Hippysmack of the XLFORUM))  |
 |{{:techtalk:evo:oil:98-07_oil_pump_comparison_21b1_by_hippysmack.jpg?direct&300|}}|{{:techtalk:evo:oil:98-07_oil_pump_comparison_21b2_by_hippysmack.jpg?direct&300|}}|{{:techtalk:evo:oil:98-07_oil_pump_comparison_25_by_hippysmack.jpg?direct&300|}}|
-||||
+|  07 outside scavenger gerotor ((photos by Hippysmack of the XLFORUM))  ||  98 and 07 scavenger gerotors installed ((photo by Hippysmack of the XLFORUM))  |
   * The 98-06 separator plate is constructed to remain still while the gerotors turn and held in place by small castings in the pump body. \\ It has an offset hole (installed only in one direction) to properly mate to the standard non-centered gear shaft.
@@ Line 59: / Line 61: @@
 |{{:techtalk:evo:oil:98-07_oil_pump_comparison_22a1_by_hippysmack.jpg?direct&300|}}|{{:techtalk:evo:oil:98-07_oil_pump_comparison_22a2_by_hippysmack.jpg?direct&300|}}|{{:techtalk:evo:oil:98-07_oil_pump_comparison_22_by_hippysmack.jpg?direct&300|}}|
-||||
+|  98 separator plate ((photos by Hippysmack of the XLFORUM))  ||  98 and 07 separator plates ((photo by Hippysmack of the XLFORUM))  |
 |{{:techtalk:evo:oil:98-07_oil_pump_comparison_22b1_by_hippysmack.jpg?direct&300|}}|{{:techtalk:evo:oil:98-07_oil_pump_comparison_22b2_by_hippysmack.jpg?direct&300|}}|{{:techtalk:evo:oil:98-07_oil_pump_comparison_22b3_by_hippysmack.jpg?direct&300|}}|
-||||
+|  07 separator plate ((photos by Hippysmack of the XLFORUM))  |||
 |{{:techtalk:evo:oil:98-07_oil_pump_comparison_22a3_by_hippysmack.jpg?direct&300|}}|{{:techtalk:evo:oil:98-07_oil_pump_comparison_22a4_by_hippysmack.jpg?direct&300|}}|{{:techtalk:evo:oil:98-07_oil_pump_comparison_22a5_by_hippysmack.jpg?direct&300|}}|
-||||
+|  98 separator plate ((photos by Hippysmack of the XLFORUM))  |||
   * The 07 feed gerotor set has a larger I.D. while utilizing the same O.D for each version.
@@ Line 71: / Line 73: @@
 |{{:techtalk:evo:oil:98-07_oil_pump_comparison_23a1_by_hippysmack.jpg?direct&300|}}|{{:techtalk:evo:oil:98-07_oil_pump_comparison_23a2_by_hippysmack.jpg?direct&300|}}|{{:techtalk:evo:oil:98-07_oil_pump_comparison_23_by_hippysmack.jpg?direct&300|}}|
-||||
+|  98 inside feed gerotor ((photos by Hippysmack of the XLFORUM))  ||  98 and 07 inside feed gerotors ((photo by Hippysmack of the XLFORUM))  |
 |{{:techtalk:evo:oil:98-07_oil_pump_comparison_23b1_by_hippysmack.jpg?direct&300|}}|{{:techtalk:evo:oil:98-07_oil_pump_comparison_23b2_by_hippysmack.jpg?direct&300|}}|
-|||
+|  07 inside feed gerotors ((photos by Hippysmack of the XLFORUM))  ||
   * The outside feed gerotors on both versions are the same O.D.
@@ Line 80: / Line 82: @@
 |{{:techtalk:evo:oil:98-07_oil_pump_comparison_24a1_by_hippysmack.jpg?direct&300|}}|{{:techtalk:evo:oil:98-07_oil_pump_comparison_24a2_by_hippysmack.jpg?direct&300|}}|{{:techtalk:evo:oil:98-07_oil_pump_comparison_24_by_hippysmack.jpg?direct&300|}}|
-||||
+|  98 outside feed gerotor ((photos by Hippysmack of the XLFORUM))  ||  98 and 07 outside feed gerotors ((photo by Hippysmack of the XLFORUM))  |
 |{{:techtalk:evo:oil:98-07_oil_pump_comparison_24b1_by_hippysmack.jpg?direct&300|}}|{{:techtalk:evo:oil:98-07_oil_pump_comparison_24b2_by_hippysmack.jpg?direct&300|}}| {{:techtalk:evo:oil:98-07_oil_pump_comparison_27_by_hippysmack.jpg?direct&300|}}|
-||||
+|  07 outside feed gerotor ((photos by Hippysmack of the XLFORUM))  ||  98 and 07 feed gerotors installed ((photo by Hippysmack of the XLFORUM))  |