Click on a pic to enlarge:

There were 2 different filler caps for these tanks (62625-62 in 1966 and (62625-66A) in 1967 (both are screw-in type).
This tank is taller than the 70-up lunchbox tanks, had a chain oiler port, banjo fitting for vent line, and used lower bolts with cotter pins, castle nuts and springs. ¹⁾
66-69 CH oil tanks are not the same as 70-78. They are basically the same shape BUT it was moved across in 70 to fit the small battery on the left.
So all the bracketry don't fit. Later ones can be re-drilled to suit earlier frames but it's a pain in the butt. ²⁾
Drain plug (704) is on the left side on the bottom of the tank. Oil filler hole is on the front side of the tank.

^{3) 4) 5)}

^{6) 7) 8)}

Mounts:
^{9) 10)}

1971 XLCH:

1971 XLCH:
¹¹⁾))

1972 XLCH:

^{12) 13) 14)}