Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
techtalk:ref:elec04 [2024/01/12 00:17]
hippysmack
techtalk:ref:elec04 [2024/01/12 00:26] (current)
hippysmack
Line 14: Line 14:
 The bottom of the mount was tapped for a 1/4" bolt to run through the tree. \\ The bottom of the mount was tapped for a 1/4" bolt to run through the tree. \\
 The bolt going through both mount halves is 1/2". \\ The bolt going through both mount halves is 1/2". \\
-The spacer between the mount and the tree is made from scrap material. ((photos by vwclogan of the XLFORUM ​http://​xlforum.net/​forums/showthread.php?​t=1067978&​page=2)) \\+The spacer between the mount and the tree is made from scrap material. ((photos by vwclogan of the XLFORUM ​https://www.xlforum.net/​forum/sportster-motorcycle-forum/​sportster-motorcycle-general-discussion-and-problems/​112669-stock-headlight-mod-relocation/​page2?​t=1067978&​page=2)) \\
 |{{:​techtalk:​ref:​elec:​headlight_mod_2_by_vwclogan.jpg?​direct&​300|}}|{{:​techtalk:​ref:​elec:​headlight_mod_4_by_vwclogan.jpg?​direct&​300|}}|{{:​techtalk:​ref:​elec:​headlight_mod_3_by_vwclogan.jpg?​direct&​300|}}| |{{:​techtalk:​ref:​elec:​headlight_mod_2_by_vwclogan.jpg?​direct&​300|}}|{{:​techtalk:​ref:​elec:​headlight_mod_4_by_vwclogan.jpg?​direct&​300|}}|{{:​techtalk:​ref:​elec:​headlight_mod_3_by_vwclogan.jpg?​direct&​300|}}|
  
 The 2 piece mounts were welded together with a mig welder using flux core wire. \\ The 2 piece mounts were welded together with a mig welder using flux core wire. \\
-Here are some drawings of the mounting bracket (dimensions not to scale). ((photos by vwclogan of the XLFORUM ​http://​xlforum.net/​forums/showthread.php?​t=1067978&​page=2)) \\+Here are some drawings of the mounting bracket (dimensions not to scale). ((photos by vwclogan of the XLFORUM ​https://www.xlforum.net/​forum/sportster-motorcycle-forum/​sportster-motorcycle-general-discussion-and-problems/​112669-stock-headlight-mod-relocation/​page2?​t=1067978&​page=2)) \\
 |{{:​techtalk:​ref:​elec:​headlight_mount_drawing_1_by_vwclogan.jpg?​direct&​300|}}|{{:​techtalk:​ref:​elec:​headlight_mount_drawing_2_by_vwclogan.jpg?​direct&​300|}}|{{:​techtalk:​ref:​elec:​headlight_mount_drawing_3_by_vwclogan.jpg?​direct&​300|}}| |{{:​techtalk:​ref:​elec:​headlight_mount_drawing_1_by_vwclogan.jpg?​direct&​300|}}|{{:​techtalk:​ref:​elec:​headlight_mount_drawing_2_by_vwclogan.jpg?​direct&​300|}}|{{:​techtalk:​ref:​elec:​headlight_mount_drawing_3_by_vwclogan.jpg?​direct&​300|}}|
  
Line 32: Line 32:
 The circuit uses commonly available parts - Relay, diodes & headlight extension harness. The circuit keeps power off the relay (contacts to the HiBeam open) until you switch to LoBeam. The only concern is that the relay operates all the time when the headlights are ON. The circuit uses commonly available parts - Relay, diodes & headlight extension harness. The circuit keeps power off the relay (contacts to the HiBeam open) until you switch to LoBeam. The only concern is that the relay operates all the time when the headlights are ON.
  
-{{:​techtalk:​ref:​elec:​headlight-switch-relay.jpg?​600|}}((Thanks to Bluto for the link in this XLF thread:http://​xlforum.net/​forums/showthread.php?​t=2081063))+{{:​techtalk:​ref:​elec:​headlight-switch-relay.jpg?​600|}}((Thanks to Bluto for the link in this XLF thread:https://www.xlforum.net/​forum/sportster-motorcycle-forum/​sportster-motorcycle-electrical/​sportster-motorcycle-lighting/​203773-headlight-off-switch?​t=2081063))
  
 \\ \\