Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revision Both sides next revision | ||
|
techtalk:ref:engmech01h [2019/08/17 17:36] hippysmack [Cam Lobes] |
techtalk:ref:engmech01h [2020/08/24 01:58] hippysmack [Test Fitting] |
||
|---|---|---|---|
| Line 102: | Line 102: | ||
| Use a fair amount of assembly lube in the bushings and in the gear teeth. \\ | Use a fair amount of assembly lube in the bushings and in the gear teeth. \\ | ||
| Rotate them by hand and make sure they all spin freely without binding. \\ | Rotate them by hand and make sure they all spin freely without binding. \\ | ||
| + | Then, install all 4 cams in the cam cover and make sure they spin freely without binding. \\ | ||
| + | On 2003 and earlier motors, the cams can be rotated thru the nosecone ignition cover. 2004-up covers don't have this hole. \\ | ||
| + | However, several folks have ran 2000-2003 covers on 3004-up motors with no issues. ((NRHS Sales of the XLFORUM http://xlforum.net/forums/showthread.php?t=1756724&page=23)) \\ | ||
| - | Then, install all 4 cams in the cam cover and make sure they spin freely without binding. | + | |{{:techtalk:ref:engmech:test_fit_cams_in_cam_cover_by_aswracing.jpg?direct&300|}}|{{:techtalk:ref:engmech:test_fitting_cams_with_the_cam_cover_on_by_aswracing.jpg?direct&300|}}| |
| - | + | | Test fitting cams in the cam cover ((photo by aswracing of the XLFORUM http://xlforum.net/forums/showthread.php?t=1715966&page=3)) |Test fitting cams with the cam cover installed ((photo by aswracing of the XLFORUM http://xlforum.net/forums/showthread.php?t=1840595))| | |
| - | |{{:techtalk:ref:engmech:test_fit_cams_in_cam_cover_by_aswracing.jpg?direct&300|}}| | + | |
| - | | Test fitting cams in the cam cover ((photo by aswracing of the XLFORUM http://xlforum.net/forums/showthread.php?t=1715966&page=3)) | | + | |
| - | + | ||
| - | |{{:techtalk:ref:engmech:test_fitting_cams_with_the_cam_cover_on_by_aswracing.jpg?direct&300|}}| | + | |
| - | |Test fitting cams with the cam cover installed ((photo by aswracing of the XLFORUM http://xlforum.net/forums/showthread.php?t=1840595))| | + | |
