Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
techtalk:ref:oil05g [2019/08/15 21:05]
hippysmack [Mod to Move Oil Scavenging to the Front on an S&S Pro Stock Case]
techtalk:ref:oil05g [2019/08/18 15:52] (current)
hippysmack [Rubine's Mod to Move Oil Scavenging to the Front on an S&S Pro Stock Case]
Line 1: Line 1:
 [[:​techtalk:​menu|{{ ​ :​techtalk:​gototechnicalmenu.jpg|}}]] [[:​techtalk:​menu|{{ ​ :​techtalk:​gototechnicalmenu.jpg|}}]]
 ====== REF: Oiling & Lubrication - Sub-05G ====== ====== REF: Oiling & Lubrication - Sub-05G ======
-====== Mod to Move Oil Scavenging to the Front on an S&S Pro Stock Case ======+====== ​Rubine'​s ​Mod to Move Oil Scavenging to the Front on an S&S Pro Stock Case ======
 Article by Rubine of the XLFORUM ((http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=16)) \\ Article by Rubine of the XLFORUM ((http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=16)) \\
  
-This is an upgraded oil return to change the scavenge ​to the front of the engine. \\+This is an upgraded oil return to change the oil scavenging ​to the front of the engine. \\  
 +Also important to note is the engine was mounted on a 15 degree forward lean. \\ 
 +{{:​techtalk:​ref:​oil:​2000_custom_88_sport_by_rubine.jpg?​direct&​300 ​ |}} ((photo by rubine of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=19)) \\ 
 +\\ 
 It also incorporates a modified 07 XL oil pump (modified by Charlie Karling of Karling Racing). \\ It also incorporates a modified 07 XL oil pump (modified by Charlie Karling of Karling Racing). \\
-{{:​techtalk:​ref:​oil:​karling_modded_07_oil_pump_by_rubine.jpg?​direct&​300|}} ((photo by Rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=10)) {{:​techtalk:​ref:​oil:​reversed_scavenging_location_24_by_rubine.jpg?​direct&​300|}} \\+See more on the [[techtalk:​ref:​oil05f|Karling Oil Pump Mod]] for the newer oil pumps here in the Sportsterpedia. \\ 
 +{{:​techtalk:​ref:​oil:​karling_modded_07_oil_pump_by_rubine.jpg?​direct&​300|}} ((photo by rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=10)) {{:​techtalk:​ref:​oil:​reversed_scavenging_location_24_by_rubine.jpg?​direct&​300|}} \\
  
 The fittings are all stainless and they'​re thin wall so no I.D. has been lost. Its actually been opened up a bit. \\ The fittings are all stainless and they'​re thin wall so no I.D. has been lost. Its actually been opened up a bit. \\
Line 16: Line 21:
 Black circle in the first pic below is where the cam chest drain will come out. \\ Black circle in the first pic below is where the cam chest drain will come out. \\
  
-{{:​techtalk:​ref:​oil:​reversed_scavenging_location_3_by_rubine.jpg?​direct&​300|}} ((photo by Rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=16)) {{:​techtalk:​ref:​oil:​reversed_scavenging_location_6_by_rubine.jpg?​direct&​300|}} ((photo by Rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=26)) {{:​techtalk:​ref:​oil:​reversed_scavenging_location_2_by_rubine.jpg?​direct&​300|}} ((photo by Rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=16))+{{:​techtalk:​ref:​oil:​reversed_scavenging_location_3_by_rubine.jpg?​direct&​300|}} ((photo by rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=16)) {{:​techtalk:​ref:​oil:​reversed_scavenging_location_6_by_rubine.jpg?​direct&​300|}} ((photo by rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=26)) {{:​techtalk:​ref:​oil:​reversed_scavenging_location_2_by_rubine.jpg?​direct&​300|}} ((photo by rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=16)) ​\\
  
-{{:​techtalk:​ref:​oil:​reversed_scavenging_location_1_by_rubine.jpg?​direct&​300|}} ((photo by Rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=16)) {{:​techtalk:​ref:​oil:​reversed_scavenging_location_5_by_rubine.jpg?​direct&​300|}} ((photo by Rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=26)) {{:​techtalk:​ref:​oil:​reversed_scavenging_location_4_by_rubine.jpg?​direct&​300|}} ​+{{:​techtalk:​ref:​oil:​reversed_scavenging_location_1_by_rubine.jpg?​direct&​300|}} ((photo by rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=16)) {{:​techtalk:​ref:​oil:​reversed_scavenging_location_5_by_rubine.jpg?​direct&​300|}} ((photo by rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=26)) {{:​techtalk:​ref:​oil:​reversed_scavenging_location_4_by_rubine.jpg?​direct&​300|}} ​((photo by rubine of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=17)) \\
  
 Scavenging is done by 2 separate things at the same time. \\ Scavenging is done by 2 separate things at the same time. \\
Line 27: Line 32:
 The plan is to drill and tap into the factory windage tray and the case at the front of the new tray with countersunk 1/4" UNC cap screws and 243 Loctite. \\ The plan is to drill and tap into the factory windage tray and the case at the front of the new tray with countersunk 1/4" UNC cap screws and 243 Loctite. \\
  
-{{:​techtalk:​ref:​oil:​reversed_scavenging_location_7_by_rubine.jpg?​direct&​300|}} ((photo by Rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=26)) ​ {{:​techtalk:​ref:​oil:​reversed_scavenging_location_8_by_rubine.jpg?​direct&​300|}} ((photo by Rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=26))+{{:​techtalk:​ref:​oil:​reversed_scavenging_location_7_by_rubine.jpg?​direct&​300|}} ((photo by rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=26)) ​ {{:​techtalk:​ref:​oil:​reversed_scavenging_location_8_by_rubine.jpg?​direct&​300|}} ((photo by rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=26))
  
 To re-direct the oil to the front of the sump, \\ To re-direct the oil to the front of the sump, \\
Line 35: Line 40:
 The sample is 16 x 8 x 2mm. \\ The sample is 16 x 8 x 2mm. \\
  
-{{:​techtalk:​ref:​oil:​reversed_scavenging_location_9_by_rubine.jpg?​direct&​300|}} ((photo by Rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=28)) {{:​techtalk:​ref:​oil:​reversed_scavenging_location_10_by_rubine.jpg?​direct&​300|}} ((photo by Rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=28))  +{{:​techtalk:​ref:​oil:​reversed_scavenging_location_9_by_rubine.jpg?​direct&​300|}} ((photo by rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=28)) {{:​techtalk:​ref:​oil:​reversed_scavenging_location_10_by_rubine.jpg?​direct&​300|}} ((photo by rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=28))  
-{{:​techtalk:​ref:​oil:​reversed_scavenging_location_11_by_rubine.jpg?​direct&​300|}} ((photo by Rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=28)) ​+{{:​techtalk:​ref:​oil:​reversed_scavenging_location_11_by_rubine.jpg?​direct&​300|}} ((photo by rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=28)) ​
  
 With several attempts of trial and error and more tig welds, it's coming together. \\ With several attempts of trial and error and more tig welds, it's coming together. \\
Line 46: Line 51:
 The fins are more informed slightly thicker with consistent welds. \\ The fins are more informed slightly thicker with consistent welds. \\
  
-{{:​techtalk:​ref:​oil:​reversed_scavenging_location_12_by_rubine.jpg?​direct&​300|}} ((photo by Rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=28)) {{:​techtalk:​ref:​oil:​reversed_scavenging_location_13_by_rubine.jpg?​direct&​300|}} ((photo by Rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=28)) {{:​techtalk:​ref:​oil:​reversed_scavenging_location_14_by_rubine.jpg?​direct&​300|}} ((photo by Rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=28))+{{:​techtalk:​ref:​oil:​reversed_scavenging_location_12_by_rubine.jpg?​direct&​300|}} ((photo by rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=28)) {{:​techtalk:​ref:​oil:​reversed_scavenging_location_13_by_rubine.jpg?​direct&​300|}} ((photo by rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=28)) {{:​techtalk:​ref:​oil:​reversed_scavenging_location_14_by_rubine.jpg?​direct&​300|}} ((photo by rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=28))
  
 The windage tray was re-made also out of 3mm aluminum for a better countersink and the fin was redone based on arches are stronger than right angles. \\ The windage tray was re-made also out of 3mm aluminum for a better countersink and the fin was redone based on arches are stronger than right angles. \\
Line 58: Line 63:
 But... will you be able to see anything, or when the motor is running will it just turn cloudy brown? If you shine a torch you can actually see the scavenge point inside the cases, through the tube. That would be nice to see with the engine running. Doubtful though.</​blockquote>​ But... will you be able to see anything, or when the motor is running will it just turn cloudy brown? If you shine a torch you can actually see the scavenge point inside the cases, through the tube. That would be nice to see with the engine running. Doubtful though.</​blockquote>​
  
-{{:​techtalk:​ref:​oil:​reversed_scavenging_location_15_by_rubine.jpg?​direct&​300|}} ((photo by Rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=32)) {{:​techtalk:​ref:​oil:​reversed_scavenging_location_16_by_rubine.jpg?​direct&​300|}} ((photo by Rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=32)) \\ +{{:​techtalk:​ref:​oil:​reversed_scavenging_location_15_by_rubine.jpg?​direct&​300|}} ((photo by rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=32)) {{:​techtalk:​ref:​oil:​reversed_scavenging_location_16_by_rubine.jpg?​direct&​300|}} ((photo by rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=32)) \\ 
-{{:​techtalk:​ref:​oil:​reversed_scavenging_location_17_by_rubine.jpg?​direct&​300|}} ((photo by Rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=32)) {{:​techtalk:​ref:​oil:​reversed_scavenging_location_18_by_rubine.jpg?​direct&​300|}} ((photo by Rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=35)) \\+{{:​techtalk:​ref:​oil:​reversed_scavenging_location_17_by_rubine.jpg?​direct&​300|}} ((photo by rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=32)) {{:​techtalk:​ref:​oil:​reversed_scavenging_location_18_by_rubine.jpg?​direct&​300|}} ((photo by rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=35)) \\
  
 Below, the last bit for the cases is done includeing the glass drain. \\ Below, the last bit for the cases is done includeing the glass drain. \\
Line 66: Line 71:
 The flywheel scraper was originally set at .015" from the flywheels but it was later moved slightly farther away. \\ The flywheel scraper was originally set at .015" from the flywheels but it was later moved slightly farther away. \\
  
-{{:​techtalk:​ref:​oil:​reversed_scavenging_location_19_by_rubine.jpg?​direct&​300|}} ((photo by Rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=36)) +{{:​techtalk:​ref:​oil:​reversed_scavenging_location_19_by_rubine.jpg?​direct&​300|}} ((photo by rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=36)) 
-{{:​techtalk:​ref:​oil:​reversed_scavenging_location_20_by_rubine.jpg?​direct&​300|}} ((photo by Rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=36)) +{{:​techtalk:​ref:​oil:​reversed_scavenging_location_20_by_rubine.jpg?​direct&​300|}} ((photo by rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=36)) 
-{{:​techtalk:​ref:​oil:​reversed_scavenging_location_21_by_rubine.jpg?​direct&​300|}} ((photo by Rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=41)) \\ +{{:​techtalk:​ref:​oil:​reversed_scavenging_location_21_by_rubine.jpg?​direct&​300|}} ((photo by rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=41)) \\ 
  
-{{:​techtalk:​ref:​oil:​reversed_scavenging_location_23_by_rubine.jpg?​direct&​300|}} ((photo by Rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=42))+{{:​techtalk:​ref:​oil:​reversed_scavenging_location_23_by_rubine.jpg?​direct&​300|}} ((photo by rubine ​of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​t=1861960&​page=42))
 {{:​techtalk:​ref:​oil:​reversed_scavenging_location_25_by_rubine.jpg?​direct&​300|}} ​ {{:​techtalk:​ref:​oil:​reversed_scavenging_location_25_by_rubine.jpg?​direct&​300|}} ​