Table of Contents
This is an old revision of the document!
REF: Shop Notes, Tips, and Tools - Sub-03P
Engine and Clutch Sprocket Locking Tools
4 Speed
 |  |
| Here's a very simple and easy (and free) tool to make to lock your clutch hub to remove or torque the nut. Take 2 clutch discs and 3 steels, install them into your clutch hub assembly, drill two 5/16 holes thru the old clutches and steels, and use 2 1/4 inch bolts to bolt them together. Leave the bolts just a shade loose so fitting the tool back into the hub is made easier because the parts can float around a little. Now install your 2 pieces of 1 x 1 angle iron cut to 4 inches in between the sprocket and drum as a jamming tool and you are all locked up without buying an expensive holding tool. 1) | |
 |
| Hinge 2) |
5 Speed
 |
| A heavy duty 4“ door hinge works well. A cheap 4” door hinge bends like a pretzel. The derilin block just gets shredded up. But, the heavy duty 4“ hinge works great. 3) |
 |  |
| Home made sprocket lock 4.19” x 1.5“ x 5/16” steel with beveled edges 4) | |
