This is an old revision of the document!
REF: Wheels, Brakes & Tires - Sub-12D
Brembo Caliper Install on 2007 883L
Parts:
- VRod Brembo caliper - 44732-06a - $144 (Zanotti)
- VRod Floating Rotor - 44405-07 - $134 (Zanotti)
- VRod Caliper Banjo Bolt - 41752-06a - $14 (Zanotti)
- Lyndall Gold pad 7254 - $52 (Phat Performance)
- Goodridge Brake Hose Ebony 36“ (should have gotten 33”) - $24 (Phat Performance)
- Goodridge Banjo Fitting 10mm 90* (for the caliper side) - $11 (Phat Performance)
- Goodridge Banjo Fitting straight 3/8“ 10mm (MC side - for stock single caliper MC) - $9 (Phat Performance)
- Goodridge copper crush washers 10mm - $4
Tools:
- 9/16”, 3/4“, 5/16”, 10mm and 12mm sockets
- T40 Torx socket
- 3/16“ and 5/16” hex drives (could use allen wrenches)
- Ratchets
- 3/8“, 7/16”, 1/2“ wrenches
- Screwdrivers
- Loctite
- Vacuum pump (to bleed the brakes)
Remove the banjo bolt on the caliper 3) | Remove old caliper, pull axle out while catching the spacers and remove the tire 4) | |
Brake line stuffed into an old oil bottle and bungee'd out of the way 5) | Banjo bolt (12mm hex) removed from the master 6) | |
Remove 5 Torx bolts (T40) holding brake rotor on. An impact wrench was used to loosen the bolts. 7) | |
Here's why you need to replace the rotor. Old one on left - new (larger one on right) 8) | Stock rotor laying on top of the new one. Look closely and you can see the difference. 9) |
1)
, 2)
, 3)
, 6)
, 8)
, 9)
, 10)
, 11)
, 12)
, 13)
, 14)
photo by Screw Loose Dan of the XLFORUM http://xlforum.net/forums/showthread.php?t=274658&highlight=brembo
4)
, 5)
, 7)
photos by Screw Loose Dan of the XLFORUM http://xlforum.net/forums/showthread.php?t=274658&highlight=brembo