Table of Contents
This is an old revision of the document!
IH: Primary Drive & Clutch
Primary Design
Primary Chain Tensioner
77 XLH with 86-90 Primary Chain Tensioner & Spring (40019-86) 1) |
Primary Fill / Drain Holes
Engine Sprocket
1957-1966 XLH, 1958-1969 XLCH sprocket kick only (40288-58) has the rear mounting surface below face.
1967-1976 XLH, 1970-1976 XLCH sprocket (40235-70A) has a mounting surface protruding from the face.
1977-up (all) sprocket (40235-74) has a mounting surface protruding even farther with a larger seal diameter.
None of them are marked with part#s. 2)
Comparison pics: 3)