Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
techtalk:ref:body51 [2020/09/02 17:36]
ixl2relax [Fender / Luggage Racks]
techtalk:ref:body51 [2022/03/09 05:08]
ixl2relax ↷ Page name changed from techtalk:ref:body02 to techtalk:ref:body51
Line 11: Line 11:
 I made a rack that bolts up to the HD Quick-Detach Sideplates. I made a rack that bolts up to the HD Quick-Detach Sideplates.
  
-The uprights ​are 9/16" square stock which hardware stores don't carry\\+The overall dimensions ​are 11" long x 8-1/2" wide. 
 + 
 +The solid vertical bars which reach down into the sideplates are 4-1/2" long\\ 
 +and are made of 9/16" square stock which hardware stores don't carry\\
 so I ordered a foot of 9/16" keystock from Amazon for about $5 IIRC.\\ so I ordered a foot of 9/16" keystock from Amazon for about $5 IIRC.\\
-HD uses 1/4-20 screws so I did the same, drilled ​and tapped for them.+HD uses 1/​4-20 ​mounting ​screws so I did the same. Drilled ​and tapped for them.
  
 The rest of the rack is made from 16ga ERW steel tubing\\ The rest of the rack is made from 16ga ERW steel tubing\\