Fender Rack by Bluto

Bluto (of the XLForum.net) gave the following information about this fender rack:
I made a rack that bolts up to the HD Quick-Detach Sideplates.

The uprights are 9/16“ square stock which hardware stores don't carry
so I ordered a foot of 9/16” keystock from Amazon for about $5 IIRC.
HD uses 1/4-20 screws so I did the same, drilled and tapped for them.

The rest of the rack is made from 16ga ERW steel tubing
plus some 1/8“ plate for the gussets and box mounts.
The square frame tubes are 3/4”. The round crossbars are 1/2“.

¹⁾

* . . . Custom Luggage Rack by Redbeard2

* . . . Custom Travel Rack by Zoharo

Here is an FLT luggage rack bent to fit the fender bolts on a 2007 Sportster XL-50, Tourpak on top.
²⁾