Fender Rack by Bluto

I did make a rack that bolts up to the HD QD side plates. The correct size for the uprights is 9/16“ square stock which hardware stores don't carry so I ordered a foot of 9/16” keystock from Amazon for about $5 IIRC. The HD accessories use 1/4-20 screws so I did the same, drilled and tapped for them. The rest of the rack is made from 16ga ERW steel tubing plus some 1/8“ plate for the gussets and box mounts.

* . . . Custom Luggage Rack by Redbeard2

* . . . Custom Travel Rack by Zoharo

Here is an FLT luggage rack bent to fit the fender bolts on a 2007 Sportster XL-50, Tourpak on top.
¹⁾