Table of Contents
This is an old revision of the document!
IH: Body Parts
Foot Controls
It is very difficult to find forward controls for 79-on IronHeads. 1)
Whatever you get they must mount between the front exhaust and the case, not in front of the front exhaust.
It is unlikely that you would find some specific for your model.
You will most likely have to get something and modify them.
See also Foot Controls, Pegs, Kickstand in the REF section of the Sportsterpedia for foot control and peg mods.
Forwards on a 1974 XLH 2) | |
Shift Lever
If you have slippage on a non splined shift lever, you can get a needle from a U joint, mic it and get a drill bit that size. 3)
Then put the lever in the position you want, drill a hole horizontally, not vertically, insert the pin and tighten the bolt.
You can also drill and tap for machine set screw vertical or horizontal. 4)