Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revision Both sides next revision | ||
|
techtalk:ref:svcproc23 [2019/01/09 04:09] ixl2relax ↷ Links adapted because of a move operation |
techtalk:ref:svcproc23 [2019/02/02 05:52] hippysmack [Cam Lift] |
||
|---|---|---|---|
| Line 120: | Line 120: | ||
| Check all four cams and compare the results. \\ | Check all four cams and compare the results. \\ | ||
| + | |||
| + | You can also measure cam lobe lift with the cams removed by using a caliper. ((rocketmangb of the XLFORUM http://xlforum.net/forums/showthread.php?s=73d24db8f0756ef41c6215fd92ad0055&p=4726240)) \\ | ||
| + | The base circle is the smallest dimension of a cam lobe. \\ | ||
| + | If you measure the largest dimension of the lobe and subtract the smallest dimension you get the lobe lift. \\ | ||
| + | Multiply that by the rocker ratio and you get the valve lift. \\ | ||
